nexmon – Rev 1
?pathlinks?
#!/bin/sh
# Setup development environment on Mac OS X (tested with 10.6.8 and Xcode 3.2.6)
#
# Copyright 2011 Michael Tuexen, Joerg Mayer, Guy Harris (see AUTHORS file)
#
# Wireshark - Network traffic analyzer
# By Gerald Combs <gerald@wireshark.org>
# Copyright 1998 Gerald Combs
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
#
# To install cmake
#
CMAKE=1
#
# To install autotools
#
AUTOTOOLS=1
#
# To build all libraries as 32-bit libraries uncomment the following three lines.
#
# export CFLAGS="$CFLAGS -arch i386"
# export CXXFLAGS="$CXXFLAGS -arch i386"
# export LDFLAGS="$LDFLAGS -arch i386"
#
# and change "macx-clang" to "macx-clang-32" in the line below.
#
# Note: when building against the 10.6 SDK, clang fails, because there's
# a missing libstdc++.dylib in the SDK; this does not bother g++, however.
#
#TARGET_PLATFORM=macx-g++
TARGET_PLATFORM=macx-clang
#
# Versions of packages to download and install.
#
#
# Some packages need xz to unpack their current source.
# xz is not yet provided with OS X.
#
XZ_VERSION=5.0.8
#
# In case we want to build with cmake.
#
CMAKE_VERSION=${CMAKE_VERSION-2.8.12.2}
#
# The following libraries and tools are required even to build only TShark.
#
GETTEXT_VERSION=0.18.2
GLIB_VERSION=2.36.0
PKG_CONFIG_VERSION=0.28
#
# One or more of the following libraries are required to build Wireshark.
#
# To override the versions of Qt and GTK call the script with some of the
# variables set to the new values. Setting a variable to empty will disable
# building the toolkit and will un-install any version previously installed
# by the script, e.g. "GTK_VERSION=3.5.2 QT_VERSION= ./macos-setup.sh"
# will build and install with GTK+ 3.5.2 and will not install Qt (and,
# if the script installed Qt earlier, will un-install that version of Qt).
#
# Note that Qt 5, prior to 5.5.0, mishandles context menus in ways that,
# for example, cause them not to work reliably in the packet detail or
# packet data pane; see, for example, Qt bugs QTBUG-31937, QTBUG-41017,
# and QTBUG-43464, all of which seem to be the same bug.
#
QT_VERSION=${QT_VERSION-5.5.0}
GTK_VERSION=${GTK_VERSION-2.24.17}
if [ "$GTK_VERSION" ]; then
#
# We'll be building GTK+, so we need some additional libraries.
#
GTK_MAJOR_VERSION="`expr $GTK_VERSION : '\([0-9][0-9]*\).*'`"
GTK_MINOR_VERSION="`expr $GTK_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
GTK_DOTDOT_VERSION="`expr $GTK_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
ATK_VERSION=2.8.0
PANGO_VERSION=1.30.1
PNG_VERSION=1.6.20
PIXMAN_VERSION=0.26.0
CAIRO_VERSION=1.12.2
GDK_PIXBUF_VERSION=2.28.0
fi
if [ "$QT_VERSION" ]; then
QT_MAJOR_VERSION="`expr $QT_VERSION : '\([0-9][0-9]*\).*'`"
QT_MINOR_VERSION="`expr $QT_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
QT_DOTDOT_VERSION="`expr $QT_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
QT_MAJOR_MINOR_VERSION=$QT_MAJOR_VERSION.$QT_MINOR_VERSION
QT_MAJOR_MINOR_DOTDOT_VERSION=$QT_MAJOR_VERSION.$QT_MINOR_VERSION.$QT_DOTDOT_VERSION
fi
#
# The following libraries are optional.
# Comment them out if you don't want them, but note that some of
# the optional libraries are required by other optional libraries.
#
LIBSMI_VERSION=0.4.8
#
# libgpg-error is required for libgcrypt.
#
LIBGPG_ERROR_VERSION=1.10
#
# libgcrypt is required for GnuTLS.
#
LIBGCRYPT_VERSION=1.5.0
GNUTLS_VERSION=2.12.19
# Use 5.2.4, not 5.3, for now; lua_bitop.c hasn't been ported to 5.3
# yet, and we need to check for compatibility issues (we'd want Lua
# scripts to work with 5.1, 5.2, and 5.3, as long as they only use Lua
# features present in all three versions)
LUA_VERSION=5.2.4
PORTAUDIO_VERSION=pa_stable_v19_20111121
#
# XXX - they appear to have an unversioned gzipped tarball for the
# current version; should we just download that, with some other
# way of specifying whether to download the GeoIP API?
#
GEOIP_VERSION=1.4.8
CARES_VERSION=1.10.0
LIBSSH_VERSION=0.7.3
DARWIN_MAJOR_VERSION=`uname -r | sed 's/\([0-9]*\).*/\1/'`
#
# GNU autotools; they're provided with releases up to Snow Leopard, but
# not in later releases, and the Snow Leopard version is too old for
# current Wireshark, so we install them unconditionally.
#
AUTOCONF_VERSION=2.69
AUTOMAKE_VERSION=1.13.3
LIBTOOL_VERSION=2.4.6
install_xz() {
if [ "$XZ_VERSION" -a ! -f xz-$XZ_VERSION-done ] ; then
echo "Downloading, building, and installing xz:"
[ -f xz-$XZ_VERSION.tar.bz2 ] || curl -O http://tukaani.org/xz/xz-$XZ_VERSION.tar.bz2 || exit 1
bzcat xz-$XZ_VERSION.tar.bz2 | tar xf - || exit 1
cd xz-$XZ_VERSION
CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0" ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch xz-$XZ_VERSION-done
fi
}
uninstall_xz() {
if [ ! -z "$installed_xz_version" ] ; then
echo "Uninstalling xz:"
cd xz-$installed_xz_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm xz-$installed_xz_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf xz-$installed_xz_version
rm -rf xz-$installed_xz_version.tar.bz2
fi
installed_xz_version=""
fi
}
install_autoconf() {
if [ "$AUTOCONF_VERSION" -a ! -f autoconf-$AUTOCONF_VERSION-done ] ; then
echo "Downloading, building and installing GNU autoconf..."
[ -f autoconf-$AUTOCONF_VERSION.tar.xz ] || curl -O ftp://ftp.gnu.org/gnu/autoconf/autoconf-$AUTOCONF_VERSION.tar.xz || exit 1
xzcat autoconf-$AUTOCONF_VERSION.tar.xz | tar xf - || exit 1
cd autoconf-$AUTOCONF_VERSION
./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch autoconf-$AUTOCONF_VERSION-done
fi
}
uninstall_autoconf() {
if [ ! -z "$installed_autoconf_version" ] ; then
#
# automake and libtool depend on this, so uninstall them.
#
uninstall_libtool
uninstall_automake
echo "Uninstalling GNU autoconf:"
cd autoconf-$installed_autoconf_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm autoconf-$installed_autoconf_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf autoconf-$installed_autoconf_version
rm -rf autoconf-$installed_autoconf_version.tar.xz
fi
installed_autoconf_version=""
fi
}
install_automake() {
if [ "$AUTOMAKE_VERSION" -a ! -f automake-$AUTOMAKE_VERSION-done ] ; then
echo "Downloading, building and installing GNU automake..."
[ -f automake-$AUTOMAKE_VERSION.tar.xz ] || curl -O ftp://ftp.gnu.org/gnu/automake/automake-$AUTOMAKE_VERSION.tar.xz || exit 1
xzcat automake-$AUTOMAKE_VERSION.tar.xz | tar xf - || exit 1
cd automake-$AUTOMAKE_VERSION
./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch automake-$AUTOMAKE_VERSION-done
fi
}
uninstall_automake() {
if [ ! -z "$installed_automake_version" ] ; then
#
# libtool depends on this(?), so uninstall it.
#
uninstall_libtool "$@"
echo "Uninstalling GNU automake:"
cd automake-$installed_automake_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm automake-$installed_automake_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf automake-$installed_automake_version
rm -rf automake-$installed_automake_version.tar.xz
fi
installed_automake_version=""
fi
}
install_libtool() {
if [ "$LIBTOOL_VERSION" -a ! -f libtool-$LIBTOOL_VERSION-done ] ; then
echo "Downloading, building and installing GNU libtool..."
[ -f libtool-$LIBTOOL_VERSION.tar.xz ] || curl -O ftp://ftp.gnu.org/gnu/libtool/libtool-$LIBTOOL_VERSION.tar.xz || exit 1
xzcat libtool-$LIBTOOL_VERSION.tar.xz | tar xf - || exit 1
cd libtool-$LIBTOOL_VERSION
./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
$DO_MV /usr/local/bin/libtool /usr/local/bin/glibtool
$DO_MV /usr/local/bin/libtoolize /usr/local/bin/glibtoolize
cd ..
touch libtool-$LIBTOOL_VERSION-done
fi
}
uninstall_libtool() {
if [ ! -z "$installed_libtool_version" ] ; then
echo "Uninstalling GNU libtool:"
cd libtool-$installed_libtool_version
$DO_MV /usr/local/bin/glibtool /usr/local/bin/libtool
$DO_MV /usr/local/bin/glibtoolize /usr/local/bin/libtoolize
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm libtool-$installed_libtool_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf libtool-$installed_libtool_version
rm -rf libtool-$installed_libtool_version.tar.xz
fi
installed_libtool_version=""
fi
}
install_cmake() {
if [ -n "$CMAKE" -a ! -f cmake-$CMAKE_VERSION-done ]; then
echo "Downloading and installing CMake:"
CMAKE_MAJOR_VERSION="`expr $CMAKE_VERSION : '\([0-9][0-9]*\).*'`"
CMAKE_MINOR_VERSION="`expr $CMAKE_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
CMAKE_DOTDOT_VERSION="`expr $CMAKE_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
CMAKE_MAJOR_MINOR_VERSION=$CMAKE_MAJOR_VERSION.$CMAKE_MINOR_VERSION
#
# NOTE: the "64" in "Darwin64" doesn't mean "64-bit-only"; the
# package in question supports both 32-bit and 64-bit x86.
#
case "$CMAKE_MAJOR_VERSION" in
0|1)
echo "CMake $CMAKE_VERSION" is too old 1>&2
;;
2)
#
# Download the DMG, run the installer.
#
[ -f cmake-$CMAKE_VERSION-Darwin64-universal.dmg ] || curl -O https://cmake.org/files/v$CMAKE_MAJOR_MINOR_VERSION/cmake-$CMAKE_VERSION-Darwin64-universal.dmg || exit 1
sudo hdiutil attach cmake-$CMAKE_VERSION-Darwin64-universal.dmg || exit 1
sudo installer -target / -pkg /Volumes/cmake-$CMAKE_VERSION-Darwin64-universal/cmake-$CMAKE_VERSION-Darwin64-universal.pkg || exit 1
sudo hdiutil detach /Volumes/cmake-$CMAKE_VERSION-Darwin64-universal
;;
3)
#
# Download the DMG and do a drag install, where "drag" means
# "mv".
#
# 3.0.* and 3.1.0 have a Darwin64-universal DMG.
# 3.1.1 and later have a Darwin-x86_64 DMG.
# Probably not many people are still developing on 32-bit
# Macs, so we don't worry about them.
#
if [ "$CMAKE_MINOR_VERSION" = 0 -o \
"$CMAKE_VERSION" = 3.1.0 ]; then
type="Darwin64-universal"
else
type="Darwin-x86_64"
fi
[ -f cmake-$CMAKE_VERSION-$type.dmg ] || curl -O https://cmake.org/files/v$CMAKE_MAJOR_MINOR_VERSION/cmake-$CMAKE_VERSION-$type.dmg || exit 1
sudo hdiutil attach cmake-$CMAKE_VERSION-$type.dmg || exit 1
sudo ditto /Volumes/cmake-$CMAKE_VERSION-$type/CMake.app /Applications/CMake.app || exit 1
#
# Plant the appropriate symbolic links in /usr/local/bin.
# It's a drag-install, so there's no installer to make them,
# and the CMake code to put them in place is lame, as
#
# 1) it defaults to /usr/bin, not /usr/local/bin;
# 2) it doesn't request the necessary root privileges;
# 3) it can't be run from the command line;
#
# so we do it ourselves.
#
for i in ccmake cmake cmake-gui cmakexbuild cpack ctest
do
sudo ln -s /Applications/CMake.app/Contents/bin/$i /usr/local/bin/$i
done
sudo hdiutil detach /Volumes/cmake-$CMAKE_VERSION-$type
;;
*)
;;
esac
touch cmake-$CMAKE_VERSION-done
fi
}
uninstall_cmake() {
if [ ! -z "$installed_cmake_version" ]; then
echo "Uninstalling CMake:"
installed_cmake_major_version="`expr $installed_cmake_version : '\([0-9][0-9]*\).*'`"
case "$installed_cmake_major_version" in
0|1)
echo "CMake $installed_cmake_version" is too old 1>&2
;;
2)
sudo rm -rf "/Applications/CMake "`echo "$installed_cmake_version" | sed 's/\([0-9][0-9]*\)\.\([0-9][0-9]*\)\.\([0-9][0-9]*\).*/\1.\2-\3/'`.app
for i in ccmake cmake cmake-gui cmakexbuild cpack ctest
do
sudo rm -f /usr/bin/$i /usr/local/bin/$i
done
sudo pkgutil --forget com.Kitware.CMake
rm cmake-$installed_cmake_version-done
;;
3)
sudo rm -rf /Applications/CMake.app
for i in ccmake cmake cmake-gui cmakexbuild cpack ctest
do
sudo rm -f /usr/local/bin/$i
done
rm cmake-$installed_cmake_version-done
;;
esac
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version,
# whatever it might happen to be called.
#
rm -f cmake-$installed_cmake_version-Darwin64-universal.dmg
rm -f cmake-$installed_cmake_version-Darwin-x86_64.dmg
fi
installed_cmake_version=""
fi
}
install_gettext() {
if [ ! -f gettext-$GETTEXT_VERSION-done ] ; then
echo "Downloading, building, and installing GNU gettext:"
[ -f gettext-$GETTEXT_VERSION.tar.gz ] || curl -O http://ftp.gnu.org/pub/gnu/gettext/gettext-$GETTEXT_VERSION.tar.gz || exit 1
gzcat gettext-$GETTEXT_VERSION.tar.gz | tar xf - || exit 1
cd gettext-$GETTEXT_VERSION
CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch gettext-$GETTEXT_VERSION-done
fi
}
uninstall_gettext() {
if [ ! -z "$installed_gettext_version" ] ; then
#
# GLib depends on this, so uninstall it.
#
uninstall_glib "$@"
echo "Uninstalling GNU gettext:"
cd gettext-$installed_gettext_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm gettext-$installed_gettext_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf gettext-$installed_gettext_version
rm -rf gettext-$installed_gettext_version.tar.gz
fi
installed_gettext_version=""
fi
}
install_pkg_config() {
if [ ! -f pkg-config-$PKG_CONFIG_VERSION-done ] ; then
echo "Downloading, building, and installing pkg-config:"
[ -f pkg-config-$PKG_CONFIG_VERSION.tar.gz ] || curl -O https://pkgconfig.freedesktop.org/releases/pkg-config-$PKG_CONFIG_VERSION.tar.gz || exit 1
gzcat pkg-config-$PKG_CONFIG_VERSION.tar.gz | tar xf - || exit 1
cd pkg-config-$PKG_CONFIG_VERSION
./configure --with-internal-glib || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch pkg-config-$PKG_CONFIG_VERSION-done
fi
}
uninstall_pkg_config() {
if [ ! -z "$installed_pkg_config_version" ] ; then
echo "Uninstalling pkg-config:"
cd pkg-config-$installed_pkg_config_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm pkg-config-$installed_pkg_config_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf pkg-config-$installed_pkg_config_version
rm -rf pkg-config-$installed_pkg_config_version.tar.gz
fi
installed_pkg_config_version=""
fi
}
install_glib() {
if [ ! -f glib-$GLIB_VERSION-done ] ; then
echo "Downloading, building, and installing GLib:"
glib_dir=`expr $GLIB_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
GLIB_MAJOR_VERSION="`expr $GLIB_VERSION : '\([0-9][0-9]*\).*'`"
GLIB_MINOR_VERSION="`expr $GLIB_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
GLIB_DOTDOT_VERSION="`expr $GLIB_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
if [[ $GLIB_MAJOR_VERSION -gt 2 ||
$GLIB_MINOR_VERSION -gt 28 ||
($GLIB_MINOR_VERSION -eq 28 && $GLIB_DOTDOT_VERSION -ge 8) ]]
then
#
# Starting with GLib 2.28.8, xz-compressed tarballs are available.
#
[ -f glib-$GLIB_VERSION.tar.xz ] || curl -L -O http://ftp.gnome.org/pub/gnome/sources/glib/$glib_dir/glib-$GLIB_VERSION.tar.xz || exit 1
xzcat glib-$GLIB_VERSION.tar.xz | tar xf - || exit 1
else
[ -f glib-$GLIB_VERSION.tar.bz2 ] || curl -L -O http://ftp.gnome.org/pub/gnome/sources/glib/$glib_dir/glib-$GLIB_VERSION.tar.bz2 || exit 1
bzcat glib-$GLIB_VERSION.tar.bz2 | tar xf - || exit 1
fi
cd glib-$GLIB_VERSION
#
# OS X ships with libffi, but doesn't provide its pkg-config file;
# explicitly specify LIBFFI_CFLAGS and LIBFFI_LIBS, so the configure
# script doesn't try to use pkg-config to get the appropriate
# C flags and loader flags.
#
# And, what's worse, at least with the version of Xcode that comes
# with Leopard, /usr/include/ffi/fficonfig.h doesn't define MACOSX,
# which causes the build of GLib to fail. If we don't find
# "#define.*MACOSX" in /usr/include/ffi/fficonfig.h, explicitly
# define it.
#
# While we're at it, suppress -Wformat-nonliteral to avoid a case
# where clang's stricter rules on when not to complain about
# non-literal format arguments cause it to complain about code
# that's safe but it wasn't told that. See my comment #25 in
# GNOME bug 691608:
#
# https://bugzilla.gnome.org/show_bug.cgi?id=691608#c25
#
# First, determine where the system include files are. (It's not
# necessarily /usr/include.) There's a bit of a greasy hack here;
# pre-5.x versions of the developer tools don't support the
# --show-sdk-path option, and will produce no output, so includedir
# will be set to /usr/include (in those older versions of the
# developer tools, there is a /usr/include directory).
#
includedir=`xcrun --show-sdk-path 2>/dev/null`/usr/include
if grep -qs '#define.*MACOSX' $includedir/ffi/fficonfig.h
then
# It's defined, nothing to do
LIBFFI_CFLAGS="-I $includedir/ffi" LIBFFI_LIBS="-lffi" CFLAGS="$CFLAGS -Wno-format-nonliteral $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS -Wno-format-nonliteral $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
else
LIBFFI_CFLAGS="-I $includedir/ffi" LIBFFI_LIBS="-lffi" CFLAGS="$CFLAGS -DMACOSX -Wno-format-nonliteral $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS -DMACOSX -Wno-format-nonliteral $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
fi
#
# Apply the fix to GNOME bug 529806:
#
# https://bugzilla.gnome.org/show_bug.cgi?id=529806
#
# if we have a version of GLib prior to 2.30.
#
if [[ $GLIB_MAJOR_VERSION -eq 2 && $GLIB_MINOR_VERSION -le 30 ]]
then
patch -p0 <../../macosx-support-lib-patches/glib-gconvert.c.patch || exit 1
fi
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch glib-$GLIB_VERSION-done
fi
}
uninstall_glib() {
if [ ! -z "$installed_glib_version" ] ; then
#
# ATK, Pango, and GTK depend on this, so uninstall them.
#
uninstall_gtk
uninstall_pango
uninstall_atk
echo "Uninstalling GLib:"
cd glib-$installed_glib_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm glib-$installed_glib_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf glib-$installed_glib_version
rm -rf glib-$installed_glib_version.tar.xz glib-$installed_glib_version.tar.bz2
fi
installed_glib_version=""
fi
}
install_qt() {
if [ "$QT_VERSION" -a ! -f qt-$QT_VERSION-done ]; then
echo "Downloading, building, and installing Qt:"
#
# What you get for this URL might just be a 302 Found reply, so use
# -L so we get redirected.
#
if [ "$QT_MAJOR_VERSION" -ge 5 ]
then
QT_VOLUME=qt-opensource-mac-x64-clang-$QT_VERSION
else
QT_VOLUME=qt-opensource-mac-$QT_VERSION
fi
[ -f $QT_VOLUME.dmg ] || curl -L -O http://download.qt.io/archive/qt/$QT_MAJOR_MINOR_VERSION/$QT_MAJOR_MINOR_DOTDOT_VERSION/$QT_VOLUME.dmg || exit 1
sudo hdiutil attach $QT_VOLUME.dmg || exit 1
if [ "$QT_MAJOR_VERSION" -ge 5 ]
then
#
# Run the installer executable directly, so that we wait for
# it to finish. Then unmount the volume.
#
/Volumes/$QT_VOLUME/$QT_VOLUME.app/Contents/MacOS/$QT_VOLUME
sudo hdiutil detach /Volumes/$QT_VOLUME
else
#
# Open the installer package; use -W, so that we wait for
# the installer to finish. Then unmount the volume.
#
open -W "/Volumes/Qt $QT_MAJOR_MINOR_DOTDOT_VERSION/Qt.mpkg"
sudo hdiutil detach "/Volumes/Qt $QT_MAJOR_MINOR_DOTDOT_VERSION"
fi
#
# Versions 5.3.x through 5.5.0, at least, have bogus .pc files.
# See bugs QTBUG-35256 and QTBUG-47162.
#
# Fix the files.
#
for i in $HOME/Qt$QT_VERSION/$QT_MAJOR_MINOR_VERSION/clang_64/lib/pkgconfig/*.pc
do
ed - $i <<EOF
H
g/Cflags: /s;;Cflags: -F\${libdir} ;
g/Cflags: /s;-I\${includedir}/Qt\([a-zA-Z0-9_]*\);-I\${libdir}/Qt\1.framework/Versions/5/Headers;
g/Libs: /s;';;g
w
q
EOF
done
touch qt-$QT_VERSION-done
fi
}
uninstall_qt() {
if [ ! -z "$installed_qt_version" ] ; then
echo "Uninstalling Qt:"
rm -rf $HOME/Qt$installed_qt_version
rm qt-$installed_qt_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded version.
#
rm -rf qt-opensource-mac-x64-clang-$installed_qt_version.dmg
fi
installed_qt_version=""
fi
}
install_libpng() {
if [ ! -f libpng-$PNG_VERSION-done ] ; then
echo "Downloading, building, and installing libpng:"
#
# The FTP site puts libpng x.y.* into a libpngxy directory.
#
subdir=`echo $PNG_VERSION | sed 's/\([1-9][0-9]*\)\.\([1-9][0-9]*\).*/libpng\1\2'/`
[ -f libpng-$PNG_VERSION.tar.xz ] || curl -O ftp://ftp.simplesystems.org/pub/libpng/png/src/$subdir/libpng-$PNG_VERSION.tar.xz
xzcat libpng-$PNG_VERSION.tar.xz | tar xf - || exit 1
cd libpng-$PNG_VERSION
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch libpng-$PNG_VERSION-done
fi
}
uninstall_libpng() {
if [ ! -z "$installed_libpng_version" ] ; then
#
# Cairo depends on this, so uninstall it.
#
uninstall_cairo "$@"
echo "Uninstalling libpng:"
cd libpng-$installed_libpng_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm libpng-$installed_libpng_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf libpng-$installed_libpng_version
rm -rf libpng-$installed_libpng_version.tar.xz
fi
installed_libpng_version=""
fi
}
install_pixman() {
if [ ! -f pixman-$PIXMAN_VERSION-done ] ; then
echo "Downloading, building, and installing pixman:"
[ -f pixman-$PIXMAN_VERSION.tar.gz ] || curl -O http://www.cairographics.org/releases/pixman-$PIXMAN_VERSION.tar.gz
gzcat pixman-$PIXMAN_VERSION.tar.gz | tar xf - || exit 1
cd pixman-$PIXMAN_VERSION
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch pixman-$PIXMAN_VERSION-done
fi
}
uninstall_pixman() {
if [ ! -z "$installed_pixman_version" ] ; then
#
# Cairo depends on this, so uninstall it.
#
uninstall_cairo "$@"
echo "Uninstalling pixman:"
cd pixman-$installed_pixman_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm pixman-$installed_pixman_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf pixman-$installed_pixman_version
rm -rf pixman-$installed_pixman_version.tar.gz
fi
installed_pixman_version=""
fi
}
install_cairo() {
if [ ! -f cairo-$CAIRO_VERSION-done ] ; then
echo "Downloading, building, and installing Cairo:"
CAIRO_MAJOR_VERSION="`expr $CAIRO_VERSION : '\([0-9][0-9]*\).*'`"
CAIRO_MINOR_VERSION="`expr $CAIRO_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
CAIRO_DOTDOT_VERSION="`expr $CAIRO_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
if [[ $CAIRO_MAJOR_VERSION -gt 1 ||
$CAIRO_MINOR_VERSION -gt 12 ||
($CAIRO_MINOR_VERSION -eq 12 && $CAIRO_DOTDOT_VERSION -ge 2) ]]
then
#
# Starting with Cairo 1.12.2, the tarballs are compressed with
# xz rather than gzip.
#
[ -f cairo-$CAIRO_VERSION.tar.xz ] || curl -O http://cairographics.org/releases/cairo-$CAIRO_VERSION.tar.xz || exit 1
xzcat cairo-$CAIRO_VERSION.tar.xz | tar xf - || exit 1
else
[ -f cairo-$CAIRO_VERSION.tar.gz ] || curl -O http://cairographics.org/releases/cairo-$CAIRO_VERSION.tar.gz || exit 1
gzcat cairo-$CAIRO_VERSION.tar.gz | tar xf - || exit 1
fi
cd cairo-$CAIRO_VERSION
# CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --enable-quartz=no || exit 1
# Maybe follow http://cairographics.org/end_to_end_build_for_mac_os_x/
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --enable-quartz=yes || exit 1
#
# We must avoid the version of libpng that comes with X11; the
# only way I've found to force that is to forcibly set INCLUDES
# when we do the build, so that this comes before CAIRO_CFLAGS,
# which has -I/usr/X11/include added to it before anything
# connected to libpng is.
#
INCLUDES="-I/usr/local/include/libpng15" make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch cairo-$CAIRO_VERSION-done
fi
}
uninstall_cairo() {
if [ ! -z "$installed_cairo_version" ] ; then
#
# GTK+ depends on this, so uninstall it.
#
uninstall_gtk "$@"
echo "Uninstalling Cairo:"
cd cairo-$installed_cairo_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm cairo-$installed_cairo_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf cairo-$installed_cairo_version
rm -rf cairo-$installed_cairo_version.tar.xz cairo-$installed_cairo_version.tar.gz
fi
installed_cairo_version=""
fi
}
install_atk() {
if [ ! -f atk-$ATK_VERSION-done ] ; then
echo "Downloading, building, and installing ATK:"
atk_dir=`expr $ATK_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
ATK_MAJOR_VERSION="`expr $ATK_VERSION : '\([0-9][0-9]*\).*'`"
ATK_MINOR_VERSION="`expr $ATK_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
ATK_DOTDOT_VERSION="`expr $ATK_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
if [[ $ATK_MAJOR_VERSION -gt 2 ||
($ATK_MAJOR_VERSION -eq 2 && $ATK_MINOR_VERSION -gt 0) ||
($ATK_MANOR_VERSION -eq 2 && $ATK_MINOR_VERSION -eq 0 && $ATK_DOTDOT_VERSION -ge 1) ]]
then
#
# Starting with ATK 2.0.1, xz-compressed tarballs are available.
#
[ -f atk-$ATK_VERSION.tar.xz ] || curl -O http://ftp.gnome.org/pub/gnome/sources/atk/$atk_dir/atk-$ATK_VERSION.tar.xz || exit 1
xzcat atk-$ATK_VERSION.tar.xz | tar xf - || exit 1
else
[ -f atk-$ATK_VERSION.tar.bz2 ] || curl -O http://ftp.gnome.org/pub/gnome/sources/atk/$atk_dir/atk-$ATK_VERSION.tar.bz2 || exit 1
bzcat atk-$ATK_VERSION.tar.bz2 | tar xf - || exit 1
fi
cd atk-$ATK_VERSION
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch atk-$ATK_VERSION-done
fi
}
uninstall_atk() {
if [ ! -z "$installed_atk_version" ] ; then
#
# GTK+ depends on this, so uninstall it.
#
uninstall_gtk "$@"
echo "Uninstalling ATK:"
cd atk-$installed_atk_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm atk-$installed_atk_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf atk-$installed_atk_version
rm -rf atk-$installed_atk_version.tar.xz atk-$installed_atk_version.tar.bz2
fi
installed_atk_version=""
fi
}
install_pango() {
if [ ! -f pango-$PANGO_VERSION-done ] ; then
echo "Downloading, building, and installing Pango:"
pango_dir=`expr $PANGO_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
PANGO_MAJOR_VERSION="`expr $PANGO_VERSION : '\([0-9][0-9]*\).*'`"
PANGO_MINOR_VERSION="`expr $PANGO_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
if [[ $PANGO_MAJOR_VERSION -gt 1 ||
$PANGO_MINOR_VERSION -ge 29 ]]
then
#
# Starting with Pango 1.29, the tarballs are compressed with
# xz rather than bzip2.
#
[ -f pango-$PANGO_VERSION.tar.xz ] || curl -L -O http://ftp.gnome.org/pub/gnome/sources/pango/$pango_dir/pango-$PANGO_VERSION.tar.xz || exit 1
xzcat pango-$PANGO_VERSION.tar.xz | tar xf - || exit 1
else
[ -f pango-$PANGO_VERSION.tar.bz2 ] || curl -L -O http://ftp.gnome.org/pub/gnome/sources/pango/$pango_dir/pango-$PANGO_VERSION.tar.bz2 || exit 1
bzcat pango-$PANGO_VERSION.tar.bz2 | tar xf - || exit 1
fi
cd pango-$PANGO_VERSION
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch pango-$PANGO_VERSION-done
fi
}
uninstall_pango() {
if [ ! -z "$installed_pango_version" ] ; then
#
# GTK+ depends on this, so uninstall it.
#
uninstall_gtk "$@"
echo "Uninstalling Pango:"
cd pango-$installed_pango_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm pango-$installed_pango_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf pango-$installed_pango_version
rm -rf pango-$installed_pango_version.tar.xz pango-$installed_pango_version.tar.bz2
fi
installed_pango_version=""
fi
}
install_gdk_pixbuf() {
if [ "$GDK_PIXBUF_VERSION" -a ! -f gdk-pixbuf-$GDK_PIXBUF_VERSION-done ] ; then
echo "Downloading, building, and installing gdk-pixbuf:"
gdk_pixbuf_dir=`expr $GDK_PIXBUF_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
[ -f gdk-pixbuf-$GDK_PIXBUF_VERSION.tar.xz ] || curl -L -O http://ftp.gnome.org/pub/gnome/sources/gdk-pixbuf/$gdk_pixbuf_dir/gdk-pixbuf-$GDK_PIXBUF_VERSION.tar.xz || exit 1
xzcat gdk-pixbuf-$GDK_PIXBUF_VERSION.tar.xz | tar xf - || exit 1
cd gdk-pixbuf-$GDK_PIXBUF_VERSION
#
# If we're building using the 10.6 SDK, force the use of libpng12.
#
# The OS's X11, and corresponding SDK, didn't introduce libpng15,
# or pkg-config files, until 10.7, so, for 10.6 have to explicitly
# set LIBPNG to override the configure script, and also force the
# CFLAGS to look for the header files for libpng12 (note that
# -isysroot doesn't affect the arguments to -I, so we need to
# include the SDK path explicitly).
#
if [[ "$sdk_target" = 10.6 ]]
then
LIBPNG="-L/usr/X11/lib -lpng12" CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS -I$SDKPATH/usr/X11/include/libpng12" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS -I$SDKPATH/usr/X11/include/libpng12" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --without-libtiff --without-libjpeg || exit 1
else
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --without-libtiff --without-libjpeg || exit 1
fi
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch gdk-pixbuf-$GDK_PIXBUF_VERSION-done
fi
}
uninstall_gdk_pixbuf() {
if [ ! -z "$installed_gdk_pixbuf_version" ] ; then
#
# GTK+ depends on this, so uninstall it.
#
uninstall_gtk "$@"
echo "Uninstalling gdk-pixbuf:"
cd gdk-pixbuf-$installed_gdk_pixbuf_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm gdk-pixbuf-$installed_gdk_pixbuf_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf gdk-pixbuf-$installed_gdk_pixbuf_version
rm -rf gdk-pixbuf-$installed_gdk_pixbuf_version.tar.xz
fi
installed_gdk_pixbuf_version=""
fi
}
install_gtk() {
if [ ! -f gtk+-$GTK_VERSION-done ] ; then
echo "Downloading, building, and installing GTK+:"
gtk_dir=`expr $GTK_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
if [[ $GTK_MAJOR_VERSION -gt 2 ||
$GTK_MINOR_VERSION -gt 24 ||
($GTK_MINOR_VERSION -eq 24 && $GTK_DOTDOT_VERSION -ge 5) ]]
then
#
# Starting with GTK+ 2.24.5, the tarballs are compressed with
# xz rather than gzip, in addition to bzip2; use xz, as we've
# built and installed it, and as xz compresses better than
# bzip2 so the tarballs take less time to download.
#
[ -f gtk+-$GTK_VERSION.tar.xz ] || curl -L -O http://ftp.gnome.org/pub/gnome/sources/gtk+/$gtk_dir/gtk+-$GTK_VERSION.tar.xz || exit 1
xzcat gtk+-$GTK_VERSION.tar.xz | tar xf - || exit 1
else
[ -f gtk+-$GTK_VERSION.tar.bz2 ] || curl -L -O http://ftp.gnome.org/pub/gnome/sources/gtk+/$gtk_dir/gtk+-$GTK_VERSION.tar.bz2 || exit 1
bzcat gtk+-$GTK_VERSION.tar.bz2 | tar xf - || exit 1
fi
cd gtk+-$GTK_VERSION
if [ $DARWIN_MAJOR_VERSION -ge "12" ]
then
#
# GTK+ 2.24.10, at least, doesn't build on Mountain Lion with the
# CUPS printing backend - either the CUPS API changed incompatibly
# or the backend was depending on non-API implementation details.
#
# Configure it out, on Mountain Lion and later, for now.
# (12 is the Darwin major version number in Mountain Lion.)
#
# Also, configure out libtiff and libjpeg; configure scripts
# just ignore unknown --enable/--disable and --with/--without
# options (at least they've always do so up to now).
#
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --disable-cups --without-libtiff --without-libjpeg || exit 1
else
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --without-libtiff --without-libjpeg || exit 1
fi
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch gtk+-$GTK_VERSION-done
fi
}
uninstall_gtk() {
if [ ! -z "$installed_gtk_version" ] ; then
echo "Uninstalling GTK+:"
cd gtk+-$installed_gtk_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm gtk+-$installed_gtk_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf gtk+-$installed_gtk_version
rm -rf gtk+-$installed_gtk_version.tar.xz gtk+-$installed_gtk_version.tar.bz2
fi
installed_gtk_version=""
fi
}
install_libsmi() {
if [ "$LIBSMI_VERSION" -a ! -f libsmi-$LIBSMI_VERSION-done ] ; then
echo "Downloading, building, and installing libsmi:"
[ -f libsmi-$LIBSMI_VERSION.tar.gz ] || curl -L -O https://www.ibr.cs.tu-bs.de/projects/libsmi/download/libsmi-$LIBSMI_VERSION.tar.gz || exit 1
gzcat libsmi-$LIBSMI_VERSION.tar.gz | tar xf - || exit 1
cd libsmi-$LIBSMI_VERSION
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch libsmi-$LIBSMI_VERSION-done
fi
}
uninstall_libsmi() {
if [ ! -z "$installed_libsmi_version" ] ; then
echo "Uninstalling libsmi:"
cd libsmi-$installed_libsmi_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm libsmi-$installed_libsmi_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf libsmi-$installed_libsmi_version
rm -rf libsmi-$installed_libsmi_version.tar.gz
fi
installed_libsmi_version=""
fi
}
install_libgpg_error() {
if [ "$LIBGPG_ERROR_VERSION" -a ! -f libgpg-error-$LIBGPG_ERROR_VERSION-done ] ; then
echo "Downloading, building, and installing libgpg-error:"
[ -f libgpg-error-$LIBGPG_ERROR_VERSION.tar.bz2 ] || curl -L -O ftp://ftp.gnupg.org/gcrypt/libgpg-error/libgpg-error-$LIBGPG_ERROR_VERSION.tar.bz2 || exit 1
bzcat libgpg-error-$LIBGPG_ERROR_VERSION.tar.bz2 | tar xf - || exit 1
cd libgpg-error-$LIBGPG_ERROR_VERSION
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch libgpg-error-$LIBGPG_ERROR_VERSION-done
fi
}
uninstall_libgpg_error() {
if [ ! -z "$installed_libgpg_error_version" ] ; then
#
# libgcrypt depends on this, so uninstall it.
#
uninstall_libgcrypt "$@"
echo "Uninstalling libgpg-error:"
cd libgpg-error-$installed_libgpg_error_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm libgpg-error-$installed_libgpg_error_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf libgpg-error-$installed_libgpg_error_version
rm -rf libgpg-error-$installed_libgpg_error_version.tar.bz2
fi
installed_libgpg_error_version=""
fi
}
install_libgcrypt() {
if [ "$LIBGCRYPT_VERSION" -a ! -f libgcrypt-$LIBGCRYPT_VERSION-done ] ; then
#
# libgpg-error is required for libgcrypt.
#
if [ -z $LIBGPG_ERROR_VERSION ]
then
echo "libgcrypt requires libgpg-error, but you didn't install libgpg-error." 1>&2
exit 1
fi
echo "Downloading, building, and installing libgcrypt:"
[ -f libgcrypt-$LIBGCRYPT_VERSION.tar.gz ] || curl -L -O ftp://ftp.gnupg.org/gcrypt/libgcrypt/libgcrypt-$LIBGCRYPT_VERSION.tar.gz || exit 1
gzcat libgcrypt-$LIBGCRYPT_VERSION.tar.gz | tar xf - || exit 1
cd libgcrypt-$LIBGCRYPT_VERSION
#
# The assembler language code is not compatible with the OS X
# x86 assembler (or is it an x86-64 vs. x86-32 issue?).
#
# libgcrypt expects gnu89, not c99/gnu99, semantics for
# "inline". See, for example:
#
# http://lists.freebsd.org/pipermail/freebsd-ports-bugs/2010-October/198809.html
#
CFLAGS="$CFLAGS -std=gnu89 $VERSION_MIN_FLAGS $SDKFLAGS" CFLAGS="$CFLAGS -std=gnu89 $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --disable-asm || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch libgcrypt-$LIBGCRYPT_VERSION-done
fi
}
uninstall_libgcrypt() {
if [ ! -z "$installed_libgcrypt_version" ] ; then
#
# GnuTLS depends on this, so uninstall it.
#
uninstall_gnutls "$@"
echo "Uninstalling libgcrypt:"
cd libgcrypt-$installed_libgcrypt_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm libgcrypt-$installed_libgcrypt_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf libgcrypt-$installed_libgcrypt_version
rm -rf libgcrypt-$installed_libgcrypt_version.tar.gz
fi
installed_libgcrypt_version=""
fi
}
install_gnutls() {
if [ "$GNUTLS_VERSION" -a ! -f gnutls-$GNUTLS_VERSION-done ] ; then
#
# GnuTLS requires libgcrypt (or nettle, in newer versions).
#
if [ -z $LIBGCRYPT_VERSION ]
then
echo "GnuTLS requires libgcrypt, but you didn't install libgcrypt" 1>&2
exit 1
fi
echo "Downloading, building, and installing GnuTLS:"
[ -f gnutls-$GNUTLS_VERSION.tar.bz2 ] || curl -L -O http://ftp.gnu.org/gnu/gnutls/gnutls-$GNUTLS_VERSION.tar.bz2 || exit 1
bzcat gnutls-$GNUTLS_VERSION.tar.bz2 | tar xf - || exit 1
cd gnutls-$GNUTLS_VERSION
#
# Use libgcrypt, not nettle.
# XXX - is there some reason to prefer nettle? Or does
# Wireshark directly use libgcrypt routines?
#
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --with-libgcrypt --without-p11-kit || exit 1
make $MAKE_BUILD_OPTS || exit 1
#
# The pkgconfig file for GnuTLS says "requires zlib", but OS X,
# while it supplies zlib, doesn't supply a pkgconfig file for
# it.
#
# Patch the GnuTLS pkgconfig file not to require zlib.
# (If the capabilities of GnuTLS that Wireshark uses don't
# depend on building GnuTLS with zlib, an alternative would be
# to configure it not to use zlib.)
#
patch -p0 lib/gnutls.pc.in <../../macosx-support-lib-patches/gnutls-pkgconfig.patch || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch gnutls-$GNUTLS_VERSION-done
fi
}
uninstall_gnutls() {
if [ ! -z "$installed_gnutls_version" ] ; then
echo "Uninstalling GnuTLS:"
cd gnutls-$installed_gnutls_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm gnutls-$installed_gnutls_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf gnutls-$installed_gnutls_version
rm -rf gnutls-$installed_gnutls_version.tar.bz2
fi
installed_gnutls_version=""
fi
}
install_lua() {
if [ "$LUA_VERSION" -a ! -f lua-$LUA_VERSION-done ] ; then
echo "Downloading, building, and installing Lua:"
[ -f lua-$LUA_VERSION.tar.gz ] || curl -L -O http://www.lua.org/ftp/lua-$LUA_VERSION.tar.gz || exit 1
gzcat lua-$LUA_VERSION.tar.gz | tar xf - || exit 1
cd lua-$LUA_VERSION
make MYCFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" MYLDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" $MAKE_BUILD_OPTS macosx || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch lua-$LUA_VERSION-done
fi
}
uninstall_lua() {
if [ ! -z "$installed_lua_version" ] ; then
echo "Uninstalling Lua:"
#
# Lua has no "make uninstall", so just remove stuff manually.
# There's no configure script, so there's no need for
# "make distclean", either; just do "make clean".
#
(cd /usr/local/bin; $DO_RM -f lua luac)
(cd /usr/local/include; $DO_RM -f lua.h luaconf.h lualib.h lauxlib.h lua.hpp)
(cd /usr/local/lib; $DO_RM -f liblua.a)
(cd /usr/local/man/man1; $DO_RM -f lua.1 luac.1)
cd lua-$installed_lua_version
make clean || exit 1
cd ..
rm lua-$installed_lua_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf lua-$installed_lua_version
rm -rf lua-$installed_lua_version.tar.gz
fi
installed_lua_version=""
fi
}
install_portaudio() {
#
# Check for both the old versionless portaudio-done and the new
# versioned -done file.
#
if [ "$PORTAUDIO_VERSION" -a ! -f portaudio-$PORTAUDIO_VERSION-done ] ; then
echo "Downloading, building, and installing PortAudio:"
[ -f $PORTAUDIO_VERSION.tgz ] || curl -L -O http://www.portaudio.com/archives/$PORTAUDIO_VERSION.tgz || exit 1
gzcat $PORTAUDIO_VERSION.tgz | tar xf - || exit 1
cd portaudio
#
# Un-comment an include that's required on Lion.
#
patch -p0 include/pa_mac_core.h <../../macosx-support-lib-patches/portaudio-pa_mac_core.h.patch
#
# Fix a bug that showed up with clang (but is a bug with any
# compiler).
#
patch -p0 src/hostapi/coreaudio/pa_mac_core.c <../../macosx-support-lib-patches/portaudio-pa_mac_core.c.patch
#
# Disable fat builds - the configure script doesn't work right
# with Xcode 4 if you leave them enabled, and we don't build
# any other libraries fat (GLib, for example, would be very
# hard to build fat), so there's no advantage to having PortAudio
# built fat.
#
# Set the minimum OS X version to 10.4, to suppress some
# deprecation warnings. (Good luck trying to make any of
# this build on an OS+Xcode with a pre-10.4 SDK; we don't
# worry about the user requesting that.)
#
# Explicitly disable deprecation, so the damn thing will build
# on El Capitan with Xcode 7.
#
CFLAGS="$CFLAGS -Wno-deprecated-declarations -mmacosx-version-min=10.4 $SDKFLAGS" CXXFLAGS="$CXXFLAGS -mmacosx-version-min=10.4 $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --disable-mac-universal || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch portaudio-$PORTAUDIO_VERSION-done
fi
}
uninstall_portaudio() {
if [ ! -z "$installed_portaudio_version" ] ; then
echo "Uninstalling PortAudio:"
cd portaudio
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm portaudio-$installed_portaudio_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf portaudio
rm -rf $installed_portaudio_version.tgz
fi
installed_portaudio_version=""
fi
}
install_geoip() {
if [ "$GEOIP_VERSION" -a ! -f geoip-$GEOIP_VERSION-done ] ; then
echo "Downloading, building, and installing GeoIP API:"
[ -f GeoIP-$GEOIP_VERSION.tar.gz ] || curl -L -O http://geolite.maxmind.com/download/geoip/api/c/GeoIP-$GEOIP_VERSION.tar.gz || exit 1
gzcat GeoIP-$GEOIP_VERSION.tar.gz | tar xf - || exit 1
cd GeoIP-$GEOIP_VERSION
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
#
# Grr. Their man pages "helpfully" have an ISO 8859-1
# copyright symbol in the copyright notice, but OS X's
# default character encoding is UTF-8. sed on Mountain
# Lion barfs at the "illegal character sequence" represented
# by an ISO 8859-1 copyright symbol, as it's not a valid
# UTF-8 sequence.
#
# iconv the relevant man pages into UTF-8.
#
for i in geoipupdate.1.in geoiplookup6.1.in geoiplookup.1.in
do
iconv -f iso8859-1 -t utf-8 man/"$i" >man/"$i".tmp &&
mv man/"$i".tmp man/"$i"
done
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch geoip-$GEOIP_VERSION-done
fi
}
uninstall_geoip() {
if [ ! -z "$installed_geoip_version" ] ; then
echo "Uninstalling GeoIP API:"
cd GeoIP-$installed_geoip_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm geoip-$installed_geoip_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf GeoIP-$installed_geoip_version
rm -rf GeoIP-$installed_geoip_version.tar.gz
fi
installed_geoip_version=""
fi
}
install_c_ares() {
if [ "$CARES_VERSION" -a ! -f c-ares-$CARES_VERSION-done ] ; then
echo "Downloading, building, and installing C-Ares API:"
[ -f c-ares-$CARES_VERSION.tar.gz ] || curl -L -O http://c-ares.haxx.se/download/c-ares-$CARES_VERSION.tar.gz || exit 1
gzcat c-ares-$CARES_VERSION.tar.gz | tar xf - || exit 1
cd c-ares-$CARES_VERSION
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch c-ares-$CARES_VERSION-done
fi
}
uninstall_c_ares() {
if [ ! -z "$installed_cares_version" ] ; then
echo "Uninstalling C-Ares API:"
cd c-ares-$installed_cares_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm c-ares-$installed_cares_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf c-ares-$installed_cares_version
rm -rf c-ares-$installed_cares_version.tar.gz
fi
installed_cares_version=""
fi
}
install_libssh() {
if [ "$LIBSSH_VERSION" -a ! -f libssh-$LIBSSH_VERSION-done ] ; then
echo "Downloading, building, and installing libssh:"
[ -f libssh-$LIBSSH_VERSION.tar.xz ] || curl -L -O https://red.libssh.org/attachments/download/195/libssh-$LIBSSH_VERSION.tar.xz || exit 1
xzcat libssh-$LIBSSH_VERSION.tar.xz | tar xf - || exit 1
cd libssh-$LIBSSH_VERSION
mkdir build
cd build
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" cmake -DWITH_GCRYPT=1 ../ || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ../..
touch libssh-$LIBSSH_VERSION-done
fi
}
uninstall_libssh() {
if [ ! -z "$installed_libssh_version" ] ; then
echo "Sadly, libssh uses cmake, and doesn't support uninstall."
fi
}
install_all() {
#
# Check whether the versions we have installed are the versions
# requested; if not, uninstall the installed versions.
#
if [ ! -z "$installed_libssh_version" -a \
"$installed_libssh_version" != "$LIBSSH_VERSION" ] ; then
echo "Installed libssh version is $installed_libssh_version"
if [ -z "$LIBSSH_VERSION" ] ; then
echo "libssh is not requested"
else
echo "Requested libssh version is $LIBSSH_VERSION"
fi
uninstall_libssh -r
fi
if [ ! -z "$installed_cares_version" -a \
"$installed_cares_version" != "$CARES_VERSION" ] ; then
echo "Installed C-Ares version is $installed_cares_version"
if [ -z "$CARES_VERSION" ] ; then
echo "C-Ares is not requested"
else
echo "Requested C-Ares version is $CARES_VERSION"
fi
uninstall_c_ares -r
fi
if [ ! -z "$installed_geoip_version" -a \
"$installed_geoip_version" != "$GEOIP_VERSION" ] ; then
echo "Installed GeoIP API version is $installed_geoip_version"
if [ -z "$GEOIP_VERSION" ] ; then
echo "GeoIP is not requested"
else
echo "Requested GeoIP version is $GEOIP_VERSION"
fi
uninstall_geoip -r
fi
if [ ! -z "$installed_portaudio_version" -a \
"$installed_portaudio_version" != "$PORTAUDIO_VERSION" ] ; then
echo "Installed PortAudio version is $installed_portaudio_version"
if [ -z "$PORTAUDIO_VERSION" ] ; then
echo "PortAudio is not requested"
else
echo "Requested PortAudio version is $PORTAUDIO_VERSION"
fi
uninstall_portaudio -r
fi
if [ ! -z "$installed_lua_version" -a \
"$installed_lua_version" != "$LUA_VERSION" ] ; then
echo "Installed Lua version is $installed_lua_version"
if [ -z "$LUA_VERSION" ] ; then
echo "Lua is not requested"
else
echo "Requested Lua version is $LUA_VERSION"
fi
uninstall_lua -r
fi
if [ ! -z "$installed_gnutls_version" -a \
"$installed_gnutls_version" != "$GNUTLS_VERSION" ] ; then
echo "Installed GnuTLS version is $installed_gnutls_version"
if [ -z "$GNUTLS_VERSION" ] ; then
echo "GnuTLS is not requested"
else
echo "Requested GnuTLS version is $GNUTLS_VERSION"
fi
uninstall_gnutls -r
fi
if [ ! -z "$installed_libgcrypt_version" -a \
"$installed_libgcrypt_version" != "$LIBGCRYPT_VERSION" ] ; then
echo "Installed libgcrypt version is $installed_libgcrypt_version"
if [ -z "$LIBGCRYPT_VERSION" ] ; then
echo "libgcrypt is not requested"
else
echo "Requested libgcrypt version is $LIBGCRYPT_VERSION"
fi
uninstall_libgcrypt -r
fi
if [ ! -z "$installed_libgpg_error_version" -a \
"$installed_libgpg_error_version" != "$LIBGPG_ERROR_VERSION" ] ; then
echo "Installed libgpg-error version is $installed_libgpg_error_version"
if [ -z "$LIBGPG_ERROR_VERSION" ] ; then
echo "libgpg-error is not requested"
else
echo "Requested libgpg-error version is $LIBGPG_ERROR_VERSION"
fi
uninstall_libgpg_error -r
fi
if [ ! -z "$installed_libsmi_version" -a \
"$installed_libsmi_version" != "$LIBSMI_VERSION" ] ; then
echo "Installed libsmi version is $installed_libsmi_version"
if [ -z "$LIBSMI_VERSION" ] ; then
echo "libsmi is not requested"
else
echo "Requested libsmi version is $LIBSMI_VERSION"
fi
uninstall_libsmi -r
fi
if [ ! -z "$installed_gtk_version" -a \
"$installed_gtk_version" != "$GTK_VERSION" ] ; then
echo "Installed GTK+ version is $installed_gtk_version"
if [ -z "$GTK_VERSION" ] ; then
echo "GTK+ is not requested"
else
echo "Requested GTK+ version is $GTK_VERSION"
fi
uninstall_gtk -r
fi
if [ ! -z "$installed_gdk_pixbuf_version" -a \
"$installed_gdk_pixbuf_version" != "$GDK_PIXBUF_VERSION" ] ; then
echo "Installed gdk-pixbuf version is $installed_gdk_pixbuf_version"
if [ -z "$GDK_PIXBUF_VERSION" ] ; then
echo "gdk-pixbuf is not requested"
else
echo "Requested gdk-pixbuf version is $GDK_PIXBUF_VERSION"
fi
uninstall_gdk_pixbuf -r
fi
if [ ! -z "$installed_pango_version" -a \
"$installed_pango_version" != "$PANGO_VERSION" ] ; then
echo "Installed Pango version is $installed_pango_version"
if [ -z "$PANGO_VERSION" ] ; then
echo "Pango is not requested"
else
echo "Requested Pango version is $PANGO_VERSION"
fi
uninstall_pango -r
fi
if [ ! -z "$installed_atk_version" -a \
"$installed_atk_version" != "$ATK_VERSION" ] ; then
echo "Installed ATK version is $installed_atk_version"
if [ -z "$ATK_VERSION" ] ; then
echo "ATK is not requested"
else
echo "Requested ATK version is $ATK_VERSION"
fi
uninstall_atk -r
fi
if [ ! -z "$installed_cairo_version" -a \
"$installed_cairo_version" != "$CAIRO_VERSION" ] ; then
echo "Installed Cairo version is $installed_cairo_version"
if [ -z "$CAIRO_VERSION" ] ; then
echo "Cairo is not requested"
else
echo "Requested Cairo version is $CAIRO_VERSION"
fi
uninstall_cairo -r
fi
if [ ! -z "$installed_pixman_version" -a \
"$installed_pixman_version" != "$PIXMAN_VERSION" ] ; then
echo "Installed pixman version is $installed_pixman_version"
if [ -z "$PIXMAN_VERSION" ] ; then
echo "pixman is not requested"
else
echo "Requested pixman version is $PIXMAN_VERSION"
fi
uninstall_pixman -r
fi
if [ ! -z "$installed_libpng_version" -a \
"$installed_libpng_version" != "$PNG_VERSION" ] ; then
echo "Installed libpng version is $installed_libpng_version"
if [ -z "$PNG_VERSION" ] ; then
echo "libpng is not requested"
else
echo "Requested libpng version is $PNG_VERSION"
fi
uninstall_libpng -r
fi
if [ ! -z "$installed_qt_version" -a \
"$installed_qt_version" != "$QT_VERSION" ] ; then
echo "Installed Qt version is $installed_qt_version"
if [ -z "$QT_VERSION" ] ; then
echo "Qt is not requested"
else
echo "Requested Qt version is $QT_VERSION"
fi
uninstall_qt -r
fi
if [ ! -z "$installed_glib_version" -a \
"$installed_glib_version" != "$GLIB_VERSION" ] ; then
echo "Installed GLib version is $installed_glib_version"
if [ -z "$GLIB_VERSION" ] ; then
echo "GLib is not requested"
else
echo "Requested GLib version is $GLIB_VERSION"
fi
uninstall_glib -r
fi
if [ ! -z "$installed_pkg_config_version" -a \
"$installed_pkg_config_version" != "$PKG_CONFIG_VERSION" ] ; then
echo "Installed pkg-config version is $installed_pkg_config_version"
if [ -z "$PKG_CONFIG_VERSION" ] ; then
echo "pkg-config is not requested"
else
echo "Requested pkg-config version is $PKG_CONFIG_VERSION"
fi
uninstall_pkg_config -r
fi
if [ ! -z "$installed_gettext_version" -a \
"$installed_gettext_version" != "$GETTEXT_VERSION" ] ; then
echo "Installed GNU gettext version is $installed_gettext_version"
if [ -z "$GETTEXT_VERSION" ] ; then
echo "GNU gettext is not requested"
else
echo "Requested GNU gettext version is $GETTEXT_VERSION"
fi
uninstall_gettext -r
fi
if [ ! -z "$installed_cmake_version" -a \
"$installed_cmake_version" != "$CMAKE_VERSION" ] ; then
echo "Installed CMake version is $installed_cmake_version"
if [ -z "$CMAKE_VERSION" ] ; then
echo "CMake is not requested"
else
echo "Requested CMake version is $CMAKE_VERSION"
fi
#
# XXX - really remove this?
# Or should we remember it as installed only if this script
# installed it?
#
uninstall_cmake -r
fi
if [ ! -z "$installed_libtool_version" -a \
"$installed_libtool_version" != "$LIBTOOL_VERSION" ] ; then
echo "Installed GNU libtool version is $installed_libtool_version"
if [ -z "$LIBTOOL_VERSION" ] ; then
echo "GNU libtool is not requested"
else
echo "Requested GNU libtool version is $LIBTOOL_VERSION"
fi
uninstall_libtool -r
fi
if [ ! -z "$installed_automake_version" -a \
"$installed_automake_version" != "$AUTOMAKE_VERSION" ] ; then
echo "Installed GNU automake version is $installed_automake_version"
if [ -z "$AUTOMAKE_VERSION" ] ; then
echo "GNU automake is not requested"
else
echo "Requested GNU automake version is $AUTOMAKE_VERSION"
fi
uninstall_automake -r
fi
if [ ! -z "$installed_autoconf_version" -a \
"$installed_autoconf_version" != "$AUTOCONF_VERSION" ] ; then
echo "Installed GNU autoconf version is $installed_autoconf_version"
if [ -z "$AUTOCONF_VERSION" ] ; then
echo "GNU autoconf is not requested"
else
echo "Requested GNU autoconf version is $AUTOCONF_VERSION"
fi
uninstall_autoconf -r
fi
if [ ! -z "$installed_xz_version" -a \
"$installed_xz_version" != "$XZ_VERSION" ] ; then
echo "Installed xz version is $installed_xz_version"
if [ -z "$XZ_VERSION" ] ; then
echo "xz is not requested"
else
echo "Requested xz version is $XZ_VERSION"
fi
uninstall_xz -r
fi
#
# Start with xz: It is the sole download format of glib later than 2.31.2
#
install_xz
install_autoconf
install_automake
install_libtool
install_cmake
#
# Start with GNU gettext; GLib requires it, and OS X doesn't have it
# or a BSD-licensed replacement.
#
# At least on Lion with Xcode 4, _FORTIFY_SOURCE gets defined as 2
# by default, which causes, for example, stpncpy to be defined as
# a hairy macro that collides with the GNU gettext configure script's
# attempts to workaround AIX's lack of a declaration for stpncpy,
# with the result being a huge train wreck. Define _FORTIFY_SOURCE
# as 0 in an attempt to keep the trains on separate tracks.
#
install_gettext
#
# GLib depends on pkg-config.
# By default, pkg-config depends on GLib; we break the dependency cycle
# by configuring pkg-config to use its own internal version of GLib.
#
install_pkg_config
install_glib
#
# Now we have reached a point where we can build everything but
# the GUI (Wireshark).
#
install_qt
if [ "$GTK_VERSION" ]; then
#
# GTK+ 3 requires a newer Cairo build than the one that comes with
# 10.6, so we build Cairo if we are using GTK+ 3.
#
# In 10.6 and 10.7, it's an X11 library; if we build with "native" GTK+
# rather than X11 GTK+, we might have to build and install Cairo.
# In 10.8 and later, there is no X11, but it's included in Xquartz;
# again, if we build with "native" GTK+, we'd have to build and install
# it.
#
if [[ "$GTK_MAJOR_VERSION" -eq 3 || "$cairo_not_in_the_os" = yes ]]; then
#
# Requirements for Cairo first
#
# The libpng that comes with the X11 for Leopard has a bogus
# pkg-config file that lies about where the header files are,
# which causes other packages not to be able to find its
# headers.
#
# The libpng in later versions is not what the version of
# libpixman we build below wants - it wants libpng15.
#
install_libpng
#
# The libpixman versions that come with the X11s for Leopard,
# Snow Leopard, and Lion is too old to support Cairo's image
# surface backend feature (which requires pixman-1 >= 0.22.0).
#
# XXX - what about the one that comes with the latest version
# of Xquartz?
#
install_pixman
#
# And now Cairo itself.
# XXX - with the libxcb that comes with 10.6,
# xcb_discard_reply() is missing, and the build fails.
#
install_cairo
fi
install_atk
install_pango
install_gdk_pixbuf
install_gtk
fi
#
# Now we have reached a point where we can build everything including
# the GUI (Wireshark), but not with any optional features such as
# SNMP OID resolution, some forms of decryption, Lua scripting, playback
# of audio, or GeoIP mapping of IP addresses.
#
# We now conditionally download optional libraries to support them;
# the default is to download them all.
#
install_libsmi
install_libgpg_error
install_libgcrypt
install_gnutls
install_lua
install_portaudio
install_geoip
install_c_ares
install_libssh
}
uninstall_all() {
if [ -d macosx-support-libs ]
then
cd macosx-support-libs
#
# Uninstall items in the reverse order from the order in which they're
# installed. Only uninstall if the download/build/install process
# completed; uninstall the version that appears in the name of
# the -done file.
#
# We also do a "make distclean", so that we don't have leftovers from
# old configurations.
#
uninstall_libssh
uninstall_c_ares
uninstall_geoip
uninstall_portaudio
uninstall_lua
uninstall_gnutls
uninstall_libgcrypt
uninstall_libgpg_error
uninstall_libsmi
uninstall_gtk
uninstall_gdk_pixbuf
uninstall_pango
uninstall_atk
uninstall_cairo
uninstall_pixman
uninstall_libpng
uninstall_qt
uninstall_glib
uninstall_pkg_config
uninstall_gettext
#
# XXX - really remove this?
# Or should we remember it as installed only if this script
# installed it?
#
uninstall_cmake
uninstall_libtool
uninstall_automake
uninstall_autoconf
uninstall_xz
fi
}
#
# Do we have permission to write in /usr/local?
#
# If so, assume we have permission to write in its subdirectories.
# (If that's not the case, this test needs to check the subdirectories
# as well.)
#
# If not, do "make install", "make uninstall", the removes for Lua,
# and the renames of [g]libtool* with sudo.
#
if [ -w /usr/local ]
then
DO_MAKE_INSTALL="make install"
DO_MAKE_UNINSTALL="make uninstall"
DO_RM="rm"
DO_MV="mv"
else
DO_MAKE_INSTALL="sudo make install"
DO_MAKE_UNINSTALL="sudo make uninstall"
DO_RM="sudo rm"
DO_MV="sudo mv"
fi
#
# If we have SDKs available, the default target OS is the major version
# of the one we're running; get that and strip off the third component
# if present.
#
for i in /Developer/SDKs \
/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs \
/Library/Developer/CommandLineTools/SDKs
do
if [ -d "$i" ]
then
min_osx_target=`sw_vers -productVersion | sed 's/\([0-9]*\)\.\([0-9]*\)\.[0-9]*/\1.\2/'`
#
# That's also the OS whose SDK we'd be using.
#
sdk_target=$min_osx_target
break
fi
done
#
# Parse command-line flags:
#
# -h - print help.
# -t <target> - build libraries so that they'll work on the specified
# version of OS X and later versions.
# -u - do an uninstall.
#
while getopts ht:u name
do
case $name in
u)
do_uninstall=yes
;;
t)
min_osx_target="$OPTARG"
;;
h|?)
echo "Usage: macosx-setup.sh [ -t <target> ] [ -u ]" 1>&1
exit 0
;;
esac
done
#
# Get the version numbers of installed packages, if any.
#
if [ -d macosx-support-libs ]
then
cd macosx-support-libs
installed_xz_version=`ls xz-*-done 2>/dev/null | sed 's/xz-\(.*\)-done/\1/'`
installed_autoconf_version=`ls autoconf-*-done 2>/dev/null | sed 's/autoconf-\(.*\)-done/\1/'`
installed_automake_version=`ls automake-*-done 2>/dev/null | sed 's/automake-\(.*\)-done/\1/'`
installed_libtool_version=`ls libtool-*-done 2>/dev/null | sed 's/libtool-\(.*\)-done/\1/'`
installed_cmake_version=`ls cmake-*-done 2>/dev/null | sed 's/cmake-\(.*\)-done/\1/'`
installed_gettext_version=`ls gettext-*-done 2>/dev/null | sed 's/gettext-\(.*\)-done/\1/'`
installed_pkg_config_version=`ls pkg-config-*-done 2>/dev/null | sed 's/pkg-config-\(.*\)-done/\1/'`
installed_glib_version=`ls glib-*-done 2>/dev/null | sed 's/glib-\(.*\)-done/\1/'`
installed_qt_version=`ls qt-*-done 2>/dev/null | sed 's/qt-\(.*\)-done/\1/'`
installed_libpng_version=`ls libpng-*-done 2>/dev/null | sed 's/libpng-\(.*\)-done/\1/'`
installed_pixman_version=`ls pixman-*-done 2>/dev/null | sed 's/pixman-\(.*\)-done/\1/'`
installed_cairo_version=`ls cairo-*-done 2>/dev/null | sed 's/cairo-\(.*\)-done/\1/'`
installed_atk_version=`ls atk-*-done 2>/dev/null | sed 's/atk-\(.*\)-done/\1/'`
installed_pango_version=`ls pango-*-done 2>/dev/null | sed 's/pango-\(.*\)-done/\1/'`
installed_gdk_pixbuf_version=`ls gdk-pixbuf-*-done 2>/dev/null | sed 's/gdk-pixbuf-\(.*\)-done/\1/'`
installed_gtk_version=`ls gtk+-*-done 2>/dev/null | sed 's/gtk+-\(.*\)-done/\1/'`
installed_libsmi_version=`ls libsmi-*-done 2>/dev/null | sed 's/libsmi-\(.*\)-done/\1/'`
installed_libgpg_error_version=`ls libgpg-error-*-done 2>/dev/null | sed 's/libgpg-error-\(.*\)-done/\1/'`
installed_libgcrypt_version=`ls libgcrypt-*-done 2>/dev/null | sed 's/libgcrypt-\(.*\)-done/\1/'`
installed_gnutls_version=`ls gnutls-*-done 2>/dev/null | sed 's/gnutls-\(.*\)-done/\1/'`
installed_lua_version=`ls lua-*-done 2>/dev/null | sed 's/lua-\(.*\)-done/\1/'`
installed_portaudio_version=`ls portaudio-*-done 2>/dev/null | sed 's/portaudio-\(.*\)-done/\1/'`
installed_geoip_version=`ls geoip-*-done 2>/dev/null | sed 's/geoip-\(.*\)-done/\1/'`
installed_cares_version=`ls c-ares-*-done 2>/dev/null | sed 's/c-ares-\(.*\)-done/\1/'`
installed_libssh_version=`ls libssh-*-done 2>/dev/null | sed 's/libssh-\(.*\)-done/\1/'`
#
# If we don't have a versioned -done file for portaudio, but do have
# an unversioned -done file for it, assume the installed version is the
# requested version, and rename the -done file to include that version.
#
if [ -z "$installed_portaudio_version" -a -f portaudio-done ] ; then
mv portaudio-done portaudio-$PORTAUDIO_VERSION-done
installed_portaudio_version=`ls portaudio-*-done 2>/dev/null | sed 's/portaudio-\(.*\)-done/\1/'`
fi
cd ..
fi
if [ "$do_uninstall" = "yes" ]
then
uninstall_all
exit 0
fi
#
# Configure scripts tend to set CFLAGS and CXXFLAGS to "-g -O2" if
# invoked without CFLAGS or CXXFLAGS being set in the environment.
#
# However, we *are* setting them in the environment, for our own
# nefarious purposes, so start them out as "-g -O2".
#
CFLAGS="-g -O2"
CXXFLAGS="-g -O2"
#
# To make this work on Leopard (rather than working *on* Snow Leopard
# when building *for* Leopard) will take more work.
#
# For one thing, Leopard's /usr/X11/lib/libXdamage.la claims, at least
# with all software updates applied, that the Xdamage shared library
# is libXdamage.1.0.0.dylib, but it is, in fact, libXdamage.1.1.0.dylib.
# This causes problems when building GTK+, so the script would have to
# fix that file.
#
if [[ $DARWIN_MAJOR_VERSION -le 9 ]]; then
echo "This script does not support any versions of OS X before Snow Leopard" 1>&2
exit 1
fi
# if no make options are present, set default options
if [ -z "$MAKE_BUILD_OPTS" ] ; then
# by default use 1.5x number of cores for parallel build
MAKE_BUILD_OPTS="-j $(( $(sysctl -n hw.logicalcpu) * 3 / 2))"
fi
#
# If we have a target release, look for the oldest SDK that's for an
# OS equal to or later than that one, and build libraries against it
# rather than against the headers and, more importantly, libraries
# that come with the OS, so that we don't end up with support libraries
# that only work on the OS version on which we built them, not earlier
# versions of the same release, or earlier releases if the minimum is
# earlier.
#
if [ ! -z "$min_osx_target" ]
then
#
# Get the real version - strip off the "10.".
# We'll worry about that if, as, and when there's ever
# an OS XI.
#
deploy_real_version=`echo "$min_osx_target" | sed -n 's/10\.\(.*\)/\1/p'`
#
# Search each directory that might contain SDKs.
#
sdkpath=""
for sdksdir in /Developer/SDKs \
/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs \
/Library/Developer/CommandLineTools/SDKs
do
#
# Get a list of all the SDKs.
#
if ! test -d "$sdksdir"
then
#
# There is no directory with that name.
# Move on to the next one in the list, if any.
#
continue
fi
#
# Get a list of all the SDKs in that directory, if any.
#
sdklist=`(cd "$sdksdir"; ls -d MacOSX10.[0-9]*.sdk 2>/dev/null)`
for sdk in $sdklist
do
#
# Get the real version for this SDK.
#
sdk_real_version=`echo "$sdk" | sed -n 's/MacOSX10\.\(.*\)\.sdk/\1/p'`
#
# Is it for the deployment target or some later release?
#
if test "$sdk_real_version" -ge "$deploy_real_version"
then
#
# Yes, use it.
#
sdkpath="$sdksdir/$sdk"
qt_sdk_arg="-sdk $sdk"
break 2
fi
done
done
if [ -z "$sdkpath" ]
then
echo "macosx-setup.sh: Couldn't find an SDK for OS X $min_osx_target or later" 1>&2
exit 1
fi
SDKPATH="$sdkpath"
sdk_target=10.$sdk_real_version
echo "Using the 10.$sdk_real_version SDK"
#
# Make sure there are links to /usr/local/include and /usr/local/lib
# in the SDK's usr/local.
#
if [ ! -e $SDKPATH/usr/local/include ]
then
if [ ! -d $SDKPATH/usr/local ]
then
sudo mkdir $SDKPATH/usr/local
fi
sudo ln -s /usr/local/include $SDKPATH/usr/local/include
fi
if [ ! -e $SDKPATH/usr/local/lib ]
then
if [ ! -d $SDKPATH/usr/local ]
then
sudo mkdir $SDKPATH/usr/local
fi
sudo ln -s /usr/local/lib $SDKPATH/usr/local/lib
fi
#
# Set the minimum OS version for which to build to the specified
# minimum target OS version, so we don't, for example, end up using
# linker features supported by the OS verson on which we're building
# but not by the target version.
#
VERSION_MIN_FLAGS="-mmacosx-version-min=$min_osx_target"
#
# Compile and link against the SDK.
#
SDKFLAGS="-isysroot $SDKPATH"
if [[ "$min_osx_target" == "10.5" ]]
then
#
# Cairo is part of Mac OS X 10.6 and later.
# The *headers* are supplied by 10.5, but the *libraries*
# aren't, so we have to build it if we're building for 10.5.
#
cairo_not_in_the_os=yes
#
# Build with older versions of the support libraries, as
# were used on the Wireshark Leopard buildbot at one
# point. (Most of these versions come from the About page
# from Wireshark 1.8.6, the last build done on that buildbot;
# the ATK version isn't reported, so this is a guess.)
#
# If you want to try building with newer versions of
# the libraries, note that:
#
# The version of fontconfig that comes with Leopard doesn't
# support FC_WEIGHT_EXTRABLACK, so we can't use any version
# of Pango newer than 1.22.4.
#
# However, Pango 1.22.4 doesn't work with versions of GLib
# after 2.29.6, because Pango 1.22.4 uses G_CONST_RETURN and
# GLib 2.29.8 and later deprecate it (there doesn't appear to
# be a GLib 2.29.7). That means we'd either have to patch
# Pango not to use it (just use "const"; G_CONST_RETURN was
# there to allow code to choose whether to use "const" or not),
# or use GLib 2.29.6 or earlier.
#
# GLib 2.29.6 includes an implementation of g_bit_lock() that,
# on x86 (32-bit and 64-bit), uses asms in a fashion
# ("asm volatile goto") that requires GCC 4.5 or later, which
# is later than the compilers that come with Leopard and Snow
# Leopard. Recent versions of GLib check for that, but 2.29.6
# doesn't, so, if you want to build GLib 2.29.6 on Leopard or
# Snow Leopard, you would have to patch glib/gbitlock.c to do
# what the newer versions of GLib do:
#
# define a USE_ASM_GOTO macro that indicates whether "asm goto"
# can be used:
# #if (defined (i386) || defined (__amd64__))
# #if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
# #define USE_ASM_GOTO 1
# #endif
# #endif
#
# replace all occurrences of
#
# #if defined (__GNUC__) && (defined (i386) || defined (__amd64__))
#
# with
#
# #ifdef USE_ASM_GOTO
#
# Using GLib 2.29.6 or earlier, however, means that we can't
# use a version of ATK later than 2.3.93, as those versions
# don't work with GLib 2.29.6. The same applies to gdk-pixbuf;
# versions of gdk-pixbuf after 2.24.1 won't work with GLib
# 2.29.6.
#
# Then you have to make sure that what you've build doesn't
# cause the X server that comes with Leopard to crash; at
# least one attempt at building for Leopard did.
#
# At least if building on Leopard, you might also find
# that, with various older versions of Cairo, including
# 1.6.4 and at least some 1.8.x versions, when you try to
# build it, the build fails because it can't find
# png_set_longjmp_fn(). I vaguely remember dealing with that,
# ages ago, but don't remember what I did.
#
GLIB_VERSION=2.16.3
if [ "$CAIRO_VERSION" ]
then
CAIRO_VERSION=1.6.4
fi
if [ "$ATK_VERSION" ]
then
ATK_VERSION=1.24.0
fi
if [ "$PANGO_VERSION" ]
then
PANGO_VERSION=1.20.2
fi
if [ "$GTK_VERSION" ]
then
GTK_VERSION=2.12.9
fi
#
# That version of GTK+ includes gdk-pixbuf.
# XXX - base this on the version of GTK+ requested.
#
GDK_PIXBUF_VERSION=
#
# Libgcrypt 1.5.0 fails to compile due to some problem with an
# asm in rijndael.c, at least with i686-apple-darwin10-gcc-4.2.1
# (GCC) 4.2.1 (Apple Inc. build 5666) (dot 3) when building
# 32-bit.
#
# We try libgcrypt 1.4.3 instead, as that's what shows up in
# the version from the Leopard buildbot.
LIBGCRYPT_VERSION=1.4.3
#
# Build 32-bit while we're at it; Leopard has a bug that
# causes some BPF functions not to work with 64-bit userland
# code, so capturing won't work.
#
CFLAGS="$CFLAGS -arch i386"
CXXFLAGS="$CXXFLAGS -arch i386"
export LDFLAGS="$LDFLAGS -arch i386"
fi
fi
export CFLAGS
export CXXFLAGS
#
# You need Xcode or the command-line tools installed to get the compilers.
#
if [ ! -x /usr/bin/xcodebuild ]; then
echo "Please install Xcode first (should be available on DVD or from the Mac App Store)."
exit 1
fi
if [ "$QT_VERSION" ]; then
#
# We need Xcode, not just the command-line tools, installed to build
# Qt.
#
# At least with Xcode 8, /usr/bin/xcodebuild --help fails if only
# the command-line tools are installed and succeeds if Xcode is
# installed. Unfortunately, it fails *with* Xcode 3, but
# /usr/bin/xcodebuild -version works with that and with Xcode 8.
# Hopefully it fails with only the command-line tools installed.
#
if /usr/bin/xcodebuild -version >/dev/null 2>&1; then
:
else
echo "Please install Xcode first (should be available on DVD or from the Mac App Store)."
echo "The command-line build tools are not sufficient to build Qt."
exit 1
fi
fi
if [ "$GTK_VERSION" ]; then
#
# If we're building with GTK+, you also need the X11 SDK; with at least
# some versions of OS X and Xcode, that is, I think, an optional install.
# (Or it might be installed with X11, but I think *that* is an optional
# install on at least some versions of OS X.)
#
if [ ! -d /usr/X11/include ]; then
echo "Please install X11 and the X11 SDK first."
echo " You can either download the latest package from"
echo " http://www.xquartz.org/ and install it or install"
echo " the native Apple package if you are on Lion or below."
exit 1
fi
fi
export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig:/usr/X11/lib/pkgconfig
#
# Do all the downloads and untarring in a subdirectory, so all that
# stuff can be removed once we've installed the support libraries.
#
if [ ! -d macosx-support-libs ]
then
mkdir macosx-support-libs || exit 1
fi
cd macosx-support-libs
install_all
echo ""
#
# Indicate what paths to use for pkg-config and cmake.
#
pkg_config_path=/usr/local/lib/pkgconfig
if [ "$QT_VERSION" ]; then
qt_base_path=$HOME/Qt$QT_VERSION/$QT_MAJOR_MINOR_VERSION/clang_64
pkg_config_path="$pkg_config_path":"$qt_base_path/lib/pkgconfig"
CMAKE_PREFIX_PATH="$CMAKE_PREFIX_PATH":"$qt_base_path/lib/cmake"
fi
pkg_config_path="$pkg_config_path":/usr/X11/lib/pkgconfig
echo "You are now prepared to build Wireshark."
echo
if [[ $CMAKE ]]; then
echo "To build with CMAKE:"
echo
echo "export PKG_CONFIG_PATH=$pkg_config_path"
echo "export CMAKE_PREFIX_PATH=$CMAKE_PREFIX_PATH"
echo "export PATH=$PATH:$qt_base_path/bin"
echo
echo "mkdir build; cd build"
echo "cmake .."
echo "make $MAKE_BUILD_OPTS app_bundle"
echo "make install/strip"
echo
fi
if [[ $AUTOTOOLS ]]; then
echo "To build with AUTOTOOLS:"
echo
echo "export PKG_CONFIG_PATH=$pkg_config_path"
echo
echo "./autogen.sh"
echo "mkdir build; cd build"
echo "../configure"
echo "make $MAKE_BUILD_OPTS"
echo "make install"
echo
fi
echo "Make sure you are allowed capture access to the network devices"
echo "See: https://wiki.wireshark.org/CaptureSetup/CapturePrivileges"
echo
exit 0