nexmon – Rev 1
?pathlinks?
# Makefile.am
# Automake file for Wireshark documentation
#
# Wireshark - Network traffic analyzer
# By Gerald Combs <gerald@wireshark.org>
# Copyright 1998 Gerald Combs
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
# We include dependencies on ../config.h in order to
# capture when $(VERSION) changes.
#
# This is a hideous hack.
#
# Automake needs to know into which sections to install various man
# pages; if the names in "man_MANS" have suffixes, it can infer the
# sections from the name (e.g., "hello.1" goes in section 1), but if
# they don't have suffixes, it can't tell what sections to put them, and
# it just gives up and doesn't create any rules to install them (and it
# gives up silently, so you have no clue what's wrong).
#
# Therefore, we can't just set "man_MANS" to a list of variables to be
# filled in by the configure script, as those variables don't have man
# page section numbers.
#
# It turns out (although this is not documented anywhere I could find
# in the automake Info file) that if you define, instead, variables with
# names like "man{section}_MANS", automake will infer that the names in
# those variables are the names of man pages to be installed in section
# "{section}".
#
# So we define "man1_MANS" to contain all the section 1 man pages and
# man4_MANS for the (one) section 4 man page.
#
# *However*, if "man_MANS" isn't defined at all, automake concludes that
# there are no man pages, the fact that, say, "man1_MANS" is defined
# nonwithstanding! (I suspect this is the result of a mistaken attempt
# to get people to fix their automake files not to use "MANS"; if "MANS"
# is defined, it prints a warning and sets the exit status, but doesn't
# exit, and then it just gives up if "man_MANS" isn't defined,
# presumably on the theory that the only reason it wouldn't be defined
# is because the automake file uses the obsolete "MANS" variable instead
# of the shiny new "man_MANS" variable.)
#
# So we also define "man_MANS", but don't define it as anything;
# automake will arrange that the Makefile define it as the union of all
# the "man{section}_MANS" variables.
#
man1_MANS = \
@wireshark_man@ \
@tshark_man@ \
@text2pcap_man@ \
@mergecap_man@ \
@reordercap_man@ \
@capinfos_man@ \
@editcap_man@ \
@dumpcap_man@ \
@rawshark_man@ \
@dftest_man@ \
@randpkt_man@ \
@androiddump_man@ \
@sshdump_man@ \
@randpktdump_man@
man4_MANS = \
@extcap_man@ \
@wiresharkfilter_man@
man_MANS =
# Build these in case a developer wants to read them and for the Debian
# development package.
# (The former arguably should be in noinst_MANS but it didn't work for me.)
noinst_DATA = asn2deb.1 asn2deb.html idl2deb.1 idl2deb.html idl2wrs.1 idl2wrs.html
pkgdata_DATA = AUTHORS-SHORT $(top_srcdir)/docbook/ws.css wireshark.html \
tshark.html wireshark-filter.html capinfos.html ciscodump.html editcap.html \
mergecap.html reordercap.html text2pcap.html dumpcap.html androiddump.html \
sshdump.html randpktdump.html rawshark.html dftest.html randpkt.html \
extcap.html
#
# Build the short version of the authors file for the about dialog
# Put a copy in the top-level directory so Help->About, when run from the
# build directory, can find it.
#
AUTHORS-SHORT: $(top_srcdir)/AUTHORS $(srcdir)/make-authors-short.pl
$(AM_V_GEN)$(PERL) $(srcdir)/perlnoutf.pl $(srcdir)/make-authors-short.pl \
< $(top_srcdir)/AUTHORS > AUTHORS-SHORT && \
cp $@ $(top_builddir)
#
# Build the short version of the authors file with formatting codes for the
# man page
#
AUTHORS-SHORT-FORMAT: AUTHORS-SHORT $(srcdir)/make-authors-format.pl
$(AM_V_GEN)$(PERL) $(srcdir)/perlnoutf.pl $(srcdir)/make-authors-format.pl \
< AUTHORS-SHORT > AUTHORS-SHORT-FORMAT
wireshark.pod: $(srcdir)/wireshark.pod.template AUTHORS-SHORT-FORMAT
$(AM_V_GEN)cat $(srcdir)/wireshark.pod.template AUTHORS-SHORT-FORMAT > wireshark.pod
AM_V_POD2MAN = $(am__v_POD2MAN_@AM_V@)
am__v_POD2MAN_ = $(am__v_POD2MAN_@AM_DEFAULT_V@)
am__v_POD2MAN_0 = @echo " POD2MAN " $@;
AM_V_POD2HTML = $(am__v_POD2HTML_@AM_V@)
am__v_POD2HTML_ = $(am__v_POD2HTML_@AM_DEFAULT_V@)
am__v_POD2HTML_0 = @echo " POD2HTML" $@;
POD_CSS_URL ?= $(top_srcdir)/docbook/ws.css
.pod.1: ../config.h
$(AM_V_POD2MAN)$(POD2MAN) \
--center="The Wireshark Network Analyzer" \
--release=$(VERSION) \
$< > $@
.pod.html: ../config.h $(top_srcdir)/docbook/ws.css
$(AM_V_POD2HTML)$(POD2HTML) \
--title="The Wireshark Network Analyzer $(VERSION)" \
--css=$(POD_CSS_URL) \
--noindex \
$< > $@
# These rules need to stay separate because of the --section option.
wireshark-filter.4: wireshark-filter.pod ../config.h
$(AM_V_POD2MAN)$(POD2MAN) \
--section=4 \
--center="The Wireshark Network Analyzer" \
--release=$(VERSION) \
$(srcdir)/wireshark-filter.pod > wireshark-filter.4
extcap.4: extcap.pod ../config.h
$(AM_V_POD2MAN)$(POD2MAN) \
--section=4 \
--center="The Wireshark Network Analyzer" \
--release=$(VERSION) \
$(srcdir)/extcap.pod > extcap.4
# These rules need to stay separate because each man page has a separate
# title. Using GNU make's pattern rules would allow these to be removed
# but at the cost of portability.
tshark.html: tshark.pod ../config.h $(top_srcdir)/docbook/ws.css
$(AM_V_POD2HTML)$(POD2HTML) \
--title="tshark - The Wireshark Network Analyzer $(VERSION)" \
--css=$(POD_CSS_URL) \
--noindex \
$(srcdir)/tshark.pod > tshark.html
wireshark-filter.html: wireshark-filter.pod ../config.h $(top_srcdir)/docbook/ws.css
$(AM_V_POD2HTML)$(POD2HTML) \
--title="wireshark-filter - The Wireshark Network Analyzer $(VERSION)" \
--css=$(POD_CSS_URL) \
--noindex \
$(srcdir)/wireshark-filter.pod > wireshark-filter.html
extcap.html: extcap.pod ../config.h $(top_srcdir)/docbook/ws.css
$(AM_V_POD2HTML)$(POD2HTML) \
--title="extcap - The Wireshark Network Analyzer $(VERSION)" \
--css=$(POD_CSS_URL) \
--noindex \
$(srcdir)/extcap.pod > extcap.html
capinfos.html: capinfos.pod ../config.h $(top_srcdir)/docbook/ws.css
$(AM_V_POD2HTML)$(POD2HTML) \
--title="capinfos - The Wireshark Network Analyzer $(VERSION)" \
--css=$(POD_CSS_URL) \
--noindex \
$(srcdir)/capinfos.pod > capinfos.html
editcap.html: editcap.pod ../config.h $(top_srcdir)/docbook/ws.css
$(AM_V_POD2HTML)$(POD2HTML) \
--title="editcap - The Wireshark Network Analyzer $(VERSION)" \
--css=$(POD_CSS_URL) \
--noindex \
$(srcdir)/editcap.pod > editcap.html
idl2wrs.html: idl2wrs.pod ../config.h $(top_srcdir)/docbook/ws.css
$(AM_V_POD2HTML)$(POD2HTML) \
--title="idl2wrs - The Wireshark Network Analyzer $(VERSION)" \
--css=$(POD_CSS_URL) \
--noindex \
$(srcdir)/idl2wrs.pod > idl2wrs.html
mergecap.html: mergecap.pod ../config.h $(top_srcdir)/docbook/ws.css
$(AM_V_POD2HTML)$(POD2HTML) \
--title="mergecap - The Wireshark Network Analyzer $(VERSION)" \
--css=$(POD_CSS_URL) \
--noindex \
$(srcdir)/mergecap.pod > mergecap.html
reordercap.html: reordercap.pod ../config.h $(top_srcdir)/docbook/ws.css
$(AM_V_POD2HTML)$(POD2HTML) \
--title="reordercap - The Wireshark Network Analyzer $(VERSION)" \
--css=$(POD_CSS_URL) \
--noindex \
$(srcdir)/reordercap.pod > reordercap.html
text2pcap.html: text2pcap.pod ../config.h $(top_srcdir)/docbook/ws.css
$(AM_V_POD2HTML)$(POD2HTML) \
--title="text2pcap - The Wireshark Network Analyzer $(VERSION)" \
--css=$(POD_CSS_URL) \
--noindex \
$(srcdir)/text2pcap.pod > text2pcap.html
dumpcap.html: dumpcap.pod ../config.h $(top_srcdir)/docbook/ws.css
$(AM_V_POD2HTML)$(POD2HTML) \
--title="dumpcap - The Wireshark Network Analyzer $(VERSION)" \
--css=$(POD_CSS_URL) \
--noindex \
$(srcdir)/dumpcap.pod > dumpcap.html
androiddump.html: androiddump.pod ../config.h $(top_srcdir)/docbook/ws.css
$(AM_V_POD2HTML)$(POD2HTML) \
--title="androiddump - The Wireshark Network Analyzer $(VERSION)" \
--css=$(POD_CSS_URL) \
--noindex \
$(srcdir)/androiddump.pod > androiddump.html
sshdump.html: sshdump.pod ../config.h $(top_srcdir)/docbook/ws.css
$(AM_V_POD2HTML)$(POD2HTML) \
--title="sshdump - The Wireshark Network Analyzer $(VERSION)" \
--css=$(POD_CSS_URL) \
--noindex \
$(srcdir)/sshdump.pod > sshdump.html
ciscodump.html: ciscodump.pod ../config.h $(top_srcdir)/docbook/ws.css
$(AM_V_POD2HTML)$(POD2HTML) \
--title="ciscodump - The Wireshark Network Analyzer $(VERSION)" \
--css=$(POD_CSS_URL) \
--noindex \
$(srcdir)/ciscodump.pod > ciscodump.html
randpktdump.html: randpktdump.pod ../config.h $(top_srcdir)/docbook/ws.css
$(AM_V_POD2HTML)$(POD2HTML) \
--title="randpktdump - The Wireshark Network Analyzer $(VERSION)" \
--css=$(POD_CSS_URL) \
--noindex \
$(srcdir)/randpktdump.pod > randpktdump.html
rawshark.html: rawshark.pod ../config.h $(top_srcdir)/docbook/ws.css
$(AM_V_POD2HTML)$(POD2HTML) \
--title="rawshark - The Wireshark Network Analyzer $(VERSION)" \
--css=$(POD_CSS_URL) \
--noindex \
$(srcdir)/rawshark.pod > rawshark.html
dftest.html: dftest.pod ../config.h $(top_srcdir)/docbook/ws.css
$(AM_V_POD2HTML)$(POD2HTML) \
--title="dftest - The Wireshark Network Analyzer $(VERSION)" \
--css=$(POD_CSS_URL) \
--noindex \
$(srcdir)/dftest.pod > dftest.html
randpkt.html: randpkt.pod ../config.h $(top_srcdir)/docbook/ws.css
$(AM_V_POD2HTML)$(POD2HTML) \
--title="randpkt - The Wireshark Network Analyzer $(VERSION)" \
--css=$(POD_CSS_URL) \
--noindex \
$(srcdir)/randpkt.pod > randpkt.html
CLEANFILES = \
wireshark.pod \
*.1 \
*.4 \
*.html
DISTCLEANFILES = \
pod2htmi.tmp \
pod2htmd.tmp \
AUTHORS-SHORT \
../AUTHORS-SHORT \
AUTHORS-SHORT-FORMAT \
*~
MAINTAINERCLEANFILES = \
Makefile.in
EXTRA_DIST = \
README.capture \
README.design \
README.developer \
README.display_filter \
README.dissector \
README.epan_child \
README.extcap \
README.heuristic \
README.idl2wrs \
README.packaging \
README.plugins \
README.qt \
README.regression \
README.request_response_tracking\
README.stats_tree \
README.tapping \
README.wmem \
README.wslua \
README.xml-output \
androiddump.pod \
asn2deb.pod \
capinfos.pod \
captype.pod \
ciscodump.pod \
dfilter2pod.pl \
dftest.pod \
dumpcap.pod \
editcap.pod \
extcap.pod \
eproto2sgml \
idl2deb.pod \
idl2wrs.pod \
make-authors-format.pl \
make-authors-short.pl \
mergecap.pod \
packet-PROTOABBREV.c \
perlnoutf.pl \
randpkt.pod \
randpkt.txt \
randpktdump.pod \
rawshark.pod \
reordercap.pod \
sgml.doc.template \
sshdump.pod \
text2pcap.pod \
tshark.pod \
wireshark-filter.pod \
wireshark.pod.template \
CMakeLists.txt