OpenWrt – Rev 1

Subversion Repositories:
Rev:
/* This file is released into the public domain */

/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

#include "mt7620a.dtsi"

/ {
        compatible = "netgear,ex3700", "ralink,mt7620a-soc";
        model = "Netgear EX3700/EX3800";

        aliases {
                led-boot = &led_power_green;
                led-failsafe = &led_power_green;
                led-running = &led_power_green;
                led-upgrade = &led_power_green;
        };

        chosen {
                bootargs = "console=ttyS0,57600";
        };

        leds {
                compatible = "gpio-leds";

                led_power_green: power_g {
                        label = "ex3700:green:power";
                        gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
                        default-state = "on";
                };

                power_a {
                        label = "ex3700:amber:power";
                        gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
                };

                router_g {
                        label = "ex3700:green:router";
                        gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
                };

                router_r {
                        label = "ex3700:red:router";
                        gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
                };

                device_g {
                        label = "ex3700:green:device";
                        gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
                };

                device_r {
                        label = "ex3700:red:device";
                        gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
                };

                wps {
                        label = "ex3700:green:wps";
                        gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
                };
        };

        keys {
                compatible = "gpio-keys-polled";
                poll-interval = <20>;

                reset {
                        label = "reset";
                        gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
                };

                wps {
                        label = "wps";
                        gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_WPS_BUTTON>;
                };
        };
};

&gpio0 {
        status = "okay";
};

&gpio2 {
        status = "okay";
};

&spi0 {
        status = "okay";

        m25p80@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;

                partitions {
                        compatible = "fixed-partitions";
                        #address-cells = <1>;
                        #size-cells = <1>;

                        partition@0 {
                                label = "u-boot";
                                reg = <0x0 0x30000>;
                                read-only;
                        };

                        partition@30000 {
                                label = "config";
                                reg = <0x30000 0x10000>;
                                read-only;
                        };

                        factory: partition@40000 {
                                label = "factory";
                                reg = <0x40000 0x10000>;
                                read-only;
                        };

                        partition@50000 {
                                compatible = "denx,uimage";
                                label = "firmware";
                                reg = <0x50000 0x790000>;
                        };

                        partition@7e0000 {
                                label = "board_data";
                                reg = <0x7e0000 0x10000>;
                                read-only;
                        };

                        partition@7f0000 {
                                label = "nvram";
                                reg = <0x7f0000 0x10000>;
                                read-only;
                        };
                };
        };
};

&pcie {
        status = "okay";
};

&pcie0 {
        mt76@0,0 {
                reg = <0x0000 0 0 0 0 >;
                mediatek,mtd-eeprom = <&factory 0x8000>;
                ieee80211-freq-limit = <5000000 6000000>;
        };
};

&ethernet {
        mtd-mac-address = <&factory 0x28>;
};

&wmac {
        ralink,mtd-eeprom = <&factory 0x0>;
};

&pinctrl {
        state_default: pinctrl0 {
                default {
                        ralink,group = "i2c", "rgmii2", "spi refclk";
                        ralink,function = "gpio";
                };
        };
};