OpenWrt – Rev 1

Subversion Repositories:
Rev:
/dts-v1/;

#include "mt7620n.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
        compatible = "dlink,dwr-116-a1", "ralink,mt7620n-soc";
        model = "D-Link DWR-116 A1/A2";

        aliases {
                led-boot = &led_status;
                led-failsafe = &led_status;
                led-running = &led_status;
                led-upgrade = &led_status;
        };

        keys {
                compatible = "gpio-keys-polled";
                poll-interval = <20>;

                wps {
                        label = "wps";
                        gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_WPS_BUTTON>;
                };

                reset {
                        label = "reset";
                        gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
                };
        };

        leds {
                compatible = "gpio-leds";

                led_status: status {
                        label = "dwr-116-a1:green:status";
                        gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
                };

                wifi {
                        label = "dwr-116-a1:green:wifi";
                        gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
                };
        };
};

&gpio1 {
        status = "okay";
};

&gpio3 {
        status = "okay";
};

&spi0 {
        status = "okay";

        flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <50000000>;

                partitions {
                        compatible = "fixed-partitions";
                        #address-cells = <1>;
                        #size-cells = <1>;

                        partition@0 {
                                label = "jboot";
                                reg = <0x0 0x10000>;
                                read-only;
                        };

                        partition@10000 {
                                compatible = "amit,jimage";
                                label = "firmware";
                                reg = <0x10000 0x7e0000>;
                        };

                        config: partition@7f0000 {
                                label = "config";
                                reg = <0x7f0000 0x10000>;
                                read-only;
                        };
                };
        };
};

&ehci {
        status = "okay";
};

&ohci {
        status = "okay";
};

&pinctrl {
        state_default: pinctrl0 {
                default {
                        ralink,group = "i2c", "wled";
                        ralink,function = "gpio";
                };
        };
};

&ethernet {
        mediatek,portmap = "llllw";
        pinctrl-names = "default";
        pinctrl-0 = <&ephy_pins>;
};