OpenWrt – Rev 4
?pathlinks?
From e76632d118659347d9261a4470d9f60bfbe0044c Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sun, 13 Sep 2015 01:06:31 +0100
Subject: sfp: display SFP module information
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
drivers/net/phy/sfp.c | 254 +++++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 253 insertions(+), 1 deletion(-)
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -247,6 +247,184 @@ static unsigned int sfp_check(void *buf,
return check;
}
+static const char *sfp_link_len(char *buf, size_t size, unsigned int length,
+ unsigned int multiplier)
+{
+ if (length == 0)
+ return "unsupported/unspecified";
+
+ if (length == 255) {
+ *buf++ = '>';
+ size -= 1;
+ length -= 1;
+ }
+
+ length *= multiplier;
+
+ if (length >= 1000)
+ snprintf(buf, size, "%u.%0*ukm",
+ length / 1000,
+ multiplier > 100 ? 1 :
+ multiplier > 10 ? 2 : 3,
+ length % 1000);
+ else
+ snprintf(buf, size, "%um", length);
+
+ return buf;
+}
+
+struct bitfield {
+ unsigned int mask;
+ unsigned int val;
+ const char *str;
+};
+
+static const struct bitfield sfp_options[] = {
+ {
+ .mask = SFP_OPTIONS_HIGH_POWER_LEVEL,
+ .val = SFP_OPTIONS_HIGH_POWER_LEVEL,
+ .str = "hpl",
+ }, {
+ .mask = SFP_OPTIONS_PAGING_A2,
+ .val = SFP_OPTIONS_PAGING_A2,
+ .str = "paginga2",
+ }, {
+ .mask = SFP_OPTIONS_RETIMER,
+ .val = SFP_OPTIONS_RETIMER,
+ .str = "retimer",
+ }, {
+ .mask = SFP_OPTIONS_COOLED_XCVR,
+ .val = SFP_OPTIONS_COOLED_XCVR,
+ .str = "cooled",
+ }, {
+ .mask = SFP_OPTIONS_POWER_DECL,
+ .val = SFP_OPTIONS_POWER_DECL,
+ .str = "powerdecl",
+ }, {
+ .mask = SFP_OPTIONS_RX_LINEAR_OUT,
+ .val = SFP_OPTIONS_RX_LINEAR_OUT,
+ .str = "rxlinear",
+ }, {
+ .mask = SFP_OPTIONS_RX_DECISION_THRESH,
+ .val = SFP_OPTIONS_RX_DECISION_THRESH,
+ .str = "rxthresh",
+ }, {
+ .mask = SFP_OPTIONS_TUNABLE_TX,
+ .val = SFP_OPTIONS_TUNABLE_TX,
+ .str = "tunabletx",
+ }, {
+ .mask = SFP_OPTIONS_RATE_SELECT,
+ .val = SFP_OPTIONS_RATE_SELECT,
+ .str = "ratesel",
+ }, {
+ .mask = SFP_OPTIONS_TX_DISABLE,
+ .val = SFP_OPTIONS_TX_DISABLE,
+ .str = "txdisable",
+ }, {
+ .mask = SFP_OPTIONS_TX_FAULT,
+ .val = SFP_OPTIONS_TX_FAULT,
+ .str = "txfault",
+ }, {
+ .mask = SFP_OPTIONS_LOS_INVERTED,
+ .val = SFP_OPTIONS_LOS_INVERTED,
+ .str = "los-",
+ }, {
+ .mask = SFP_OPTIONS_LOS_NORMAL,
+ .val = SFP_OPTIONS_LOS_NORMAL,
+ .str = "los+",
+ }, { }
+};
+
+static const struct bitfield diagmon[] = {
+ {
+ .mask = SFP_DIAGMON_DDM,
+ .val = SFP_DIAGMON_DDM,
+ .str = "ddm",
+ }, {
+ .mask = SFP_DIAGMON_INT_CAL,
+ .val = SFP_DIAGMON_INT_CAL,
+ .str = "intcal",
+ }, {
+ .mask = SFP_DIAGMON_EXT_CAL,
+ .val = SFP_DIAGMON_EXT_CAL,
+ .str = "extcal",
+ }, {
+ .mask = SFP_DIAGMON_RXPWR_AVG,
+ .val = SFP_DIAGMON_RXPWR_AVG,
+ .str = "rxpwravg",
+ }, { }
+};
+
+static const char *sfp_bitfield(char *out, size_t outsz, const struct bitfield *bits, unsigned int val)
+{
+ char *p = out;
+ int n;
+
+ *p = '\0';
+ while (bits->mask) {
+ if ((val & bits->mask) == bits->val) {
+ n = snprintf(p, outsz, "%s%s",
+ out != p ? ", " : "",
+ bits->str);
+ if (n == outsz)
+ break;
+ p += n;
+ outsz -= n;
+ }
+ bits++;
+ }
+
+ return out;
+}
+
+static const char *sfp_connector(unsigned int connector)
+{
+ switch (connector) {
+ case SFP_CONNECTOR_UNSPEC:
+ return "unknown/unspecified";
+ case SFP_CONNECTOR_SC:
+ return "SC";
+ case SFP_CONNECTOR_FIBERJACK:
+ return "Fiberjack";
+ case SFP_CONNECTOR_LC:
+ return "LC";
+ case SFP_CONNECTOR_MT_RJ:
+ return "MT-RJ";
+ case SFP_CONNECTOR_MU:
+ return "MU";
+ case SFP_CONNECTOR_SG:
+ return "SG";
+ case SFP_CONNECTOR_OPTICAL_PIGTAIL:
+ return "Optical pigtail";
+ case SFP_CONNECTOR_HSSDC_II:
+ return "HSSDC II";
+ case SFP_CONNECTOR_COPPER_PIGTAIL:
+ return "Copper pigtail";
+ default:
+ return "unknown";
+ }
+}
+
+static const char *sfp_encoding(unsigned int encoding)
+{
+ switch (encoding) {
+ case SFP_ENCODING_UNSPEC:
+ return "unspecified";
+ case SFP_ENCODING_8472_64B66B:
+ return "64b66b";
+ case SFP_ENCODING_8B10B:
+ return "8b10b";
+ case SFP_ENCODING_4B5B:
+ return "4b5b";
+ case SFP_ENCODING_NRZ:
+ return "NRZ";
+ case SFP_ENCODING_8472_MANCHESTER:
+ return "MANCHESTER";
+ default:
+ return "unknown";
+ }
+}
+
/* Helpers */
static void sfp_module_tx_disable(struct sfp *sfp)
{
@@ -415,6 +593,7 @@ static int sfp_sm_mod_probe(struct sfp *
char sn[17];
char date[9];
char rev[5];
+ char options[80];
u8 check;
int err;
@@ -458,10 +637,83 @@ static int sfp_sm_mod_probe(struct sfp *
rev[4] = '\0';
memcpy(sn, sfp->id.ext.vendor_sn, 16);
sn[16] = '\0';
- memcpy(date, sfp->id.ext.datecode, 8);
+ date[0] = sfp->id.ext.datecode[4];
+ date[1] = sfp->id.ext.datecode[5];
+ date[2] = '-';
+ date[3] = sfp->id.ext.datecode[2];
+ date[4] = sfp->id.ext.datecode[3];
+ date[5] = '-';
+ date[6] = sfp->id.ext.datecode[0];
+ date[7] = sfp->id.ext.datecode[1];
date[8] = '\0';
dev_info(sfp->dev, "module %s %s rev %s sn %s dc %s\n", vendor, part, rev, sn, date);
+ dev_info(sfp->dev, " %s connector, encoding %s, nominal bitrate %u.%uGbps +%u%% -%u%%\n",
+ sfp_connector(sfp->id.base.connector),
+ sfp_encoding(sfp->id.base.encoding),
+ sfp->id.base.br_nominal / 10,
+ sfp->id.base.br_nominal % 10,
+ sfp->id.ext.br_max, sfp->id.ext.br_min);
+ dev_info(sfp->dev, " 1000BaseSX%c 1000BaseLX%c 1000BaseCX%c 1000BaseT%c 100BaseTLX%c 1000BaseFX%c BaseBX10%c BasePX%c\n",
+ sfp->id.base.e1000_base_sx ? '+' : '-',
+ sfp->id.base.e1000_base_lx ? '+' : '-',
+ sfp->id.base.e1000_base_cx ? '+' : '-',
+ sfp->id.base.e1000_base_t ? '+' : '-',
+ sfp->id.base.e100_base_lx ? '+' : '-',
+ sfp->id.base.e100_base_fx ? '+' : '-',
+ sfp->id.base.e_base_bx10 ? '+' : '-',
+ sfp->id.base.e_base_px ? '+' : '-');
+ dev_info(sfp->dev, " 10GBaseSR%c 10GBaseLR%c 10GBaseLRM%c 10GBaseER%c\n",
+ sfp->id.base.e10g_base_sr ? '+' : '-',
+ sfp->id.base.e10g_base_lr ? '+' : '-',
+ sfp->id.base.e10g_base_lrm ? '+' : '-',
+ sfp->id.base.e10g_base_er ? '+' : '-');
+
+ if (!sfp->id.base.sfp_ct_passive && !sfp->id.base.sfp_ct_active &&
+ !sfp->id.base.e1000_base_t) {
+ char len_9um[16], len_om[16];
+
+ dev_info(sfp->dev, " Wavelength %unm, fiber lengths:\n",
+ be16_to_cpup(&sfp->id.base.optical_wavelength));
+
+ if (sfp->id.base.link_len[0] == 255)
+ strcpy(len_9um, ">254km");
+ else if (sfp->id.base.link_len[1] && sfp->id.base.link_len[1] != 255)
+ sprintf(len_9um, "%um",
+ sfp->id.base.link_len[1] * 100);
+ else if (sfp->id.base.link_len[0])
+ sprintf(len_9um, "%ukm", sfp->id.base.link_len[0]);
+ else if (sfp->id.base.link_len[1] == 255)
+ strcpy(len_9um, ">25.4km");
+ else
+ strcpy(len_9um, "unsupported");
+
+ dev_info(sfp->dev, " 9µm SM : %s\n", len_9um);
+ dev_info(sfp->dev, " 62.5µm MM OM1: %s\n",
+ sfp_link_len(len_om, sizeof(len_om),
+ sfp->id.base.link_len[3], 10));
+ dev_info(sfp->dev, " 50µm MM OM2: %s\n",
+ sfp_link_len(len_om, sizeof(len_om),
+ sfp->id.base.link_len[2], 10));
+ dev_info(sfp->dev, " 50µm MM OM3: %s\n",
+ sfp_link_len(len_om, sizeof(len_om),
+ sfp->id.base.link_len[5], 10));
+ dev_info(sfp->dev, " 50µm MM OM4: %s\n",
+ sfp_link_len(len_om, sizeof(len_om),
+ sfp->id.base.link_len[4], 10));
+ } else {
+ char len[16];
+ dev_info(sfp->dev, " Copper length: %s\n",
+ sfp_link_len(len, sizeof(len),
+ sfp->id.base.link_len[4], 1));
+ }
+
+ dev_info(sfp->dev, " Options: %s\n",
+ sfp_bitfield(options, sizeof(options), sfp_options,
+ be16_to_cpu(sfp->id.ext.options)));
+ dev_info(sfp->dev, " Diagnostics: %s\n",
+ sfp_bitfield(options, sizeof(options), diagmon,
+ sfp->id.ext.diagmon));
/* We only support SFP modules, not the legacy GBIC modules. */
if (sfp->id.base.phys_id != SFP_PHYS_ID_SFP ||