OpenWrt – Rev 4
?pathlinks?
From 05375244c8e74f90239db92646a771905fdfc0db Mon Sep 17 00:00:00 2001
From: Biwen Li <biwen.li@nxp.com>
Date: Tue, 30 Oct 2018 18:28:22 +0800
Subject: [PATCH 38/40] smmu: support layerscape
This is an integrated patch of smmu for layerscape
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
.../devicetree/bindings/misc/fsl,qoriq-mc.txt | 39 ++++++
drivers/iommu/arm-smmu.c | 7 +
drivers/iommu/iommu.c | 21 +++
drivers/iommu/of_iommu.c | 126 +++++++++++++++++-
drivers/of/irq.c | 6 +-
drivers/of/of_pci.c | 101 --------------
include/linux/iommu.h | 2 +
include/linux/of_iommu.h | 10 ++
include/linux/of_pci.h | 10 --
9 files changed, 205 insertions(+), 117 deletions(-)
--- a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
+++ b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
@@ -9,6 +9,25 @@ blocks that can be used to create functi
such as network interfaces, crypto accelerator instances, L2 switches,
etc.
+For an overview of the DPAA2 architecture and fsl-mc bus see:
+drivers/staging/fsl-mc/README.txt
+
+As described in the above overview, all DPAA2 objects in a DPRC share the
+same hardware "isolation context" and a 10-bit value called an ICID
+(isolation context id) is expressed by the hardware to identify
+the requester.
+
+The generic 'iommus' property is insufficient to describe the relationship
+between ICIDs and IOMMUs, so an iommu-map property is used to define
+the set of possible ICIDs under a root DPRC and how they map to
+an IOMMU.
+
+For generic IOMMU bindings, see
+Documentation/devicetree/bindings/iommu/iommu.txt.
+
+For arm-smmu binding, see:
+Documentation/devicetree/bindings/iommu/arm,smmu.txt.
+
Required properties:
- compatible
@@ -88,14 +107,34 @@ Sub-nodes:
Value type: <phandle>
Definition: Specifies the phandle to the PHY device node associated
with the this dpmac.
+Optional properties:
+
+- iommu-map: Maps an ICID to an IOMMU and associated iommu-specifier
+ data.
+
+ The property is an arbitrary number of tuples of
+ (icid-base,iommu,iommu-base,length).
+
+ Any ICID i in the interval [icid-base, icid-base + length) is
+ associated with the listed IOMMU, with the iommu-specifier
+ (i - icid-base + iommu-base).
Example:
+ smmu: iommu@5000000 {
+ compatible = "arm,mmu-500";
+ #iommu-cells = <2>;
+ stream-match-mask = <0x7C00>;
+ ...
+ };
+
fsl_mc: fsl-mc@80c000000 {
compatible = "fsl,qoriq-mc";
reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */
<0x00000000 0x08340000 0 0x40000>; /* MC control reg */
msi-parent = <&its>;
+ /* define map for ICIDs 23-64 */
+ iommu-map = <23 &smmu 23 41>;
#address-cells = <3>;
#size-cells = <1>;
--- a/drivers/iommu/arm-smmu.c
+++ b/drivers/iommu/arm-smmu.c
@@ -52,6 +52,7 @@
#include <linux/spinlock.h>
#include <linux/amba/bus.h>
+#include <linux/fsl/mc.h>
#include "io-pgtable.h"
#include "arm-smmu-regs.h"
@@ -1465,6 +1466,8 @@ static struct iommu_group *arm_smmu_devi
if (dev_is_pci(dev))
group = pci_device_group(dev);
+ else if (dev_is_fsl_mc(dev))
+ group = fsl_mc_device_group(dev);
else
group = generic_device_group(dev);
@@ -2043,6 +2046,10 @@ static void arm_smmu_bus_init(void)
bus_set_iommu(&pci_bus_type, &arm_smmu_ops);
}
#endif
+#ifdef CONFIG_FSL_MC_BUS
+ if (!iommu_present(&fsl_mc_bus_type))
+ bus_set_iommu(&fsl_mc_bus_type, &arm_smmu_ops);
+#endif
}
static int arm_smmu_device_probe(struct platform_device *pdev)
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -33,6 +33,7 @@
#include <linux/bitops.h>
#include <linux/property.h>
#include <trace/events/iommu.h>
+#include <linux/fsl/mc.h>
static struct kset *iommu_group_kset;
static DEFINE_IDA(iommu_group_ida);
@@ -987,6 +988,26 @@ struct iommu_group *pci_device_group(str
return iommu_group_alloc();
}
+/* Get the IOMMU group for device on fsl-mc bus */
+struct iommu_group *fsl_mc_device_group(struct device *dev)
+{
+ struct device *cont_dev = fsl_mc_cont_dev(dev);
+ struct iommu_group *group;
+
+ /* Container device is responsible for creating the iommu group */
+ if (fsl_mc_is_cont_dev(dev)) {
+ group = iommu_group_alloc();
+ if (IS_ERR(group))
+ return NULL;
+ } else {
+ get_device(cont_dev);
+ group = iommu_group_get(cont_dev);
+ put_device(cont_dev);
+ }
+
+ return group;
+}
+
/**
* iommu_group_get_for_dev - Find or create the IOMMU group for a device
* @dev: target device
--- a/drivers/iommu/of_iommu.c
+++ b/drivers/iommu/of_iommu.c
@@ -24,6 +24,7 @@
#include <linux/of_iommu.h>
#include <linux/of_pci.h>
#include <linux/slab.h>
+#include <linux/fsl/mc.h>
#define NO_IOMMU 1
@@ -143,15 +144,115 @@ struct of_pci_iommu_alias_info {
struct device_node *np;
};
+/**
+ * of_map_rid - Translate a requester ID through a downstream mapping.
+ * @np: root complex device node.
+ * @rid: Requester ID to map.
+ * @map_name: property name of the map to use.
+ * @map_mask_name: optional property name of the mask to use.
+ * @target: optional pointer to a target device node.
+ * @id_out: optional pointer to receive the translated ID.
+ *
+ * Given PCI/MC requester ID, look up the appropriate implementation-defined
+ * platform ID and/or the target device which receives transactions on that
+ * ID, as per the "iommu-map" and "msi-map" bindings. Either of @target or
+ * @id_out may be NULL if only the other is required. If @target points to
+ * a non-NULL device node pointer, only entries targeting that node will be
+ * matched; if it points to a NULL value, it will receive the device node of
+ * the first matching target phandle, with a reference held.
+ *
+ * Return: 0 on success or a standard error code on failure.
+ */
+int of_map_rid(struct device_node *np, u32 rid,
+ const char *map_name, const char *map_mask_name,
+ struct device_node **target, u32 *id_out)
+{
+ u32 map_mask, masked_rid;
+ int map_len;
+ const __be32 *map = NULL;
+
+ if (!np || !map_name || (!target && !id_out))
+ return -EINVAL;
+
+ map = of_get_property(np, map_name, &map_len);
+ if (!map) {
+ if (target)
+ return -ENODEV;
+ /* Otherwise, no map implies no translation */
+ *id_out = rid;
+ return 0;
+ }
+
+ if (!map_len || map_len % (4 * sizeof(*map))) {
+ pr_err("%pOF: Error: Bad %s length: %d\n", np,
+ map_name, map_len);
+ return -EINVAL;
+ }
+
+ /* The default is to select all bits. */
+ map_mask = 0xffffffff;
+
+ /*
+ * Can be overridden by "{iommu,msi}-map-mask" property.
+ * If of_property_read_u32() fails, the default is used.
+ */
+ if (map_mask_name)
+ of_property_read_u32(np, map_mask_name, &map_mask);
+
+ masked_rid = map_mask & rid;
+ for ( ; map_len > 0; map_len -= 4 * sizeof(*map), map += 4) {
+ struct device_node *phandle_node;
+ u32 rid_base = be32_to_cpup(map + 0);
+ u32 phandle = be32_to_cpup(map + 1);
+ u32 out_base = be32_to_cpup(map + 2);
+ u32 rid_len = be32_to_cpup(map + 3);
+
+ if (rid_base & ~map_mask) {
+ pr_err("%pOF: Invalid %s translation - %s-mask (0x%x) ignores rid-base (0x%x)\n",
+ np, map_name, map_name,
+ map_mask, rid_base);
+ return -EFAULT;
+ }
+
+ if (masked_rid < rid_base || masked_rid >= rid_base + rid_len)
+ continue;
+
+ phandle_node = of_find_node_by_phandle(phandle);
+ if (!phandle_node)
+ return -ENODEV;
+
+ if (target) {
+ if (*target)
+ of_node_put(phandle_node);
+ else
+ *target = phandle_node;
+
+ if (*target != phandle_node)
+ continue;
+ }
+
+ if (id_out)
+ *id_out = masked_rid - rid_base + out_base;
+
+ pr_debug("%pOF: %s, using mask %08x, rid-base: %08x, out-base: %08x, length: %08x, rid: %08x -> %08x\n",
+ np, map_name, map_mask, rid_base, out_base,
+ rid_len, rid, *id_out);
+ return 0;
+ }
+
+ pr_err("%pOF: Invalid %s translation - no match for rid 0x%x on %pOF\n",
+ np, map_name, rid, target && *target ? *target : NULL);
+ return -EFAULT;
+}
static int of_pci_iommu_init(struct pci_dev *pdev, u16 alias, void *data)
{
struct of_pci_iommu_alias_info *info = data;
struct of_phandle_args iommu_spec = { .args_count = 1 };
int err;
- err = of_pci_map_rid(info->np, alias, "iommu-map",
- "iommu-map-mask", &iommu_spec.np,
- iommu_spec.args);
+ err = of_map_rid(info->np, alias, "iommu-map",
+ "iommu-map-mask", &iommu_spec.np,
+ iommu_spec.args);
if (err)
return err == -ENODEV ? NO_IOMMU : err;
@@ -160,6 +261,23 @@ static int of_pci_iommu_init(struct pci_
return err;
}
+static int of_fsl_mc_iommu_init(struct fsl_mc_device *mc_dev,
+ struct device_node *master_np)
+{
+ struct of_phandle_args iommu_spec = { .args_count = 1 };
+ int err;
+
+ err = of_map_rid(master_np, mc_dev->icid, "iommu-map",
+ "iommu-map-mask", &iommu_spec.np,
+ iommu_spec.args);
+ if (err)
+ return err == -ENODEV ? NO_IOMMU : err;
+
+ err = of_iommu_xlate(&mc_dev->dev, &iommu_spec);
+ of_node_put(iommu_spec.np);
+ return err;
+}
+
const struct iommu_ops *of_iommu_configure(struct device *dev,
struct device_node *master_np)
{
@@ -191,6 +309,8 @@ const struct iommu_ops *of_iommu_configu
err = pci_for_each_dma_alias(to_pci_dev(dev),
of_pci_iommu_init, &info);
+ } else if (dev_is_fsl_mc(dev)) {
+ err = of_fsl_mc_iommu_init(to_fsl_mc_device(dev), master_np);
} else {
struct of_phandle_args iommu_spec;
int idx = 0;
--- a/drivers/of/irq.c
+++ b/drivers/of/irq.c
@@ -26,7 +26,7 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_irq.h>
-#include <linux/of_pci.h>
+#include <linux/of_iommu.h>
#include <linux/string.h>
#include <linux/slab.h>
@@ -593,8 +593,8 @@ static u32 __of_msi_map_rid(struct devic
* "msi-map" property.
*/
for (parent_dev = dev; parent_dev; parent_dev = parent_dev->parent)
- if (!of_pci_map_rid(parent_dev->of_node, rid_in, "msi-map",
- "msi-map-mask", np, &rid_out))
+ if (!of_map_rid(parent_dev->of_node, rid_in, "msi-map",
+ "msi-map-mask", np, &rid_out))
break;
return rid_out;
}
--- a/drivers/of/of_pci.c
+++ b/drivers/of/of_pci.c
@@ -281,104 +281,3 @@ parse_failed:
}
EXPORT_SYMBOL_GPL(of_pci_get_host_bridge_resources);
#endif /* CONFIG_OF_ADDRESS */
-
-/**
- * of_pci_map_rid - Translate a requester ID through a downstream mapping.
- * @np: root complex device node.
- * @rid: PCI requester ID to map.
- * @map_name: property name of the map to use.
- * @map_mask_name: optional property name of the mask to use.
- * @target: optional pointer to a target device node.
- * @id_out: optional pointer to receive the translated ID.
- *
- * Given a PCI requester ID, look up the appropriate implementation-defined
- * platform ID and/or the target device which receives transactions on that
- * ID, as per the "iommu-map" and "msi-map" bindings. Either of @target or
- * @id_out may be NULL if only the other is required. If @target points to
- * a non-NULL device node pointer, only entries targeting that node will be
- * matched; if it points to a NULL value, it will receive the device node of
- * the first matching target phandle, with a reference held.
- *
- * Return: 0 on success or a standard error code on failure.
- */
-int of_pci_map_rid(struct device_node *np, u32 rid,
- const char *map_name, const char *map_mask_name,
- struct device_node **target, u32 *id_out)
-{
- u32 map_mask, masked_rid;
- int map_len;
- const __be32 *map = NULL;
-
- if (!np || !map_name || (!target && !id_out))
- return -EINVAL;
-
- map = of_get_property(np, map_name, &map_len);
- if (!map) {
- if (target)
- return -ENODEV;
- /* Otherwise, no map implies no translation */
- *id_out = rid;
- return 0;
- }
-
- if (!map_len || map_len % (4 * sizeof(*map))) {
- pr_err("%pOF: Error: Bad %s length: %d\n", np,
- map_name, map_len);
- return -EINVAL;
- }
-
- /* The default is to select all bits. */
- map_mask = 0xffffffff;
-
- /*
- * Can be overridden by "{iommu,msi}-map-mask" property.
- * If of_property_read_u32() fails, the default is used.
- */
- if (map_mask_name)
- of_property_read_u32(np, map_mask_name, &map_mask);
-
- masked_rid = map_mask & rid;
- for ( ; map_len > 0; map_len -= 4 * sizeof(*map), map += 4) {
- struct device_node *phandle_node;
- u32 rid_base = be32_to_cpup(map + 0);
- u32 phandle = be32_to_cpup(map + 1);
- u32 out_base = be32_to_cpup(map + 2);
- u32 rid_len = be32_to_cpup(map + 3);
-
- if (rid_base & ~map_mask) {
- pr_err("%pOF: Invalid %s translation - %s-mask (0x%x) ignores rid-base (0x%x)\n",
- np, map_name, map_name,
- map_mask, rid_base);
- return -EFAULT;
- }
-
- if (masked_rid < rid_base || masked_rid >= rid_base + rid_len)
- continue;
-
- phandle_node = of_find_node_by_phandle(phandle);
- if (!phandle_node)
- return -ENODEV;
-
- if (target) {
- if (*target)
- of_node_put(phandle_node);
- else
- *target = phandle_node;
-
- if (*target != phandle_node)
- continue;
- }
-
- if (id_out)
- *id_out = masked_rid - rid_base + out_base;
-
- pr_debug("%pOF: %s, using mask %08x, rid-base: %08x, out-base: %08x, length: %08x, rid: %08x -> %08x\n",
- np, map_name, map_mask, rid_base, out_base,
- rid_len, rid, *id_out);
- return 0;
- }
-
- pr_err("%pOF: Invalid %s translation - no match for rid 0x%x on %pOF\n",
- np, map_name, rid, target && *target ? *target : NULL);
- return -EFAULT;
-}
--- a/include/linux/iommu.h
+++ b/include/linux/iommu.h
@@ -389,6 +389,8 @@ static inline size_t iommu_map_sg(struct
extern struct iommu_group *pci_device_group(struct device *dev);
/* Generic device grouping function */
extern struct iommu_group *generic_device_group(struct device *dev);
+/* FSL-MC device grouping function */
+struct iommu_group *fsl_mc_device_group(struct device *dev);
/**
* struct iommu_fwspec - per-device IOMMU instance data
--- a/include/linux/of_iommu.h
+++ b/include/linux/of_iommu.h
@@ -15,6 +15,9 @@ extern int of_get_dma_window(struct devi
extern const struct iommu_ops *of_iommu_configure(struct device *dev,
struct device_node *master_np);
+int of_map_rid(struct device_node *np, u32 rid,
+ const char *map_name, const char *map_mask_name,
+ struct device_node **target, u32 *id_out);
#else
static inline int of_get_dma_window(struct device_node *dn, const char *prefix,
@@ -30,6 +33,13 @@ static inline const struct iommu_ops *of
return NULL;
}
+static inline int of_map_rid(struct device_node *np, u32 rid,
+ const char *map_name, const char *map_mask_name,
+ struct device_node **target, u32 *id_out)
+{
+ return -EINVAL;
+}
+
#endif /* CONFIG_OF_IOMMU */
extern struct of_device_id __iommu_of_table;
--- a/include/linux/of_pci.h
+++ b/include/linux/of_pci.h
@@ -19,9 +19,6 @@ int of_pci_parse_bus_range(struct device
int of_get_pci_domain_nr(struct device_node *node);
int of_pci_get_max_link_speed(struct device_node *node);
void of_pci_check_probe_only(void);
-int of_pci_map_rid(struct device_node *np, u32 rid,
- const char *map_name, const char *map_mask_name,
- struct device_node **target, u32 *id_out);
#else
static inline int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq)
{
@@ -57,13 +54,6 @@ of_get_pci_domain_nr(struct device_node
return -1;
}
-static inline int of_pci_map_rid(struct device_node *np, u32 rid,
- const char *map_name, const char *map_mask_name,
- struct device_node **target, u32 *id_out)
-{
- return -EINVAL;
-}
-
static inline int
of_pci_get_max_link_speed(struct device_node *node)
{