OpenWrt – Rev 1

Subversion Repositories:
Rev:
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -93,6 +93,14 @@ config MACH_COMPEXWP18
          WP18 or NP18A boards. For more information on this
          platform, see http://www.compex.com.sg/home/OEM/product_ap.htm
 
+config MACH_WRT300NV2
+       bool "Linksys WRT300N v2"
+       select PCI
+       help
+         Say 'Y' here if you want your kernel to support Linksys'
+         WRT300N v2 router. For more information on this
+         platform, see http://openwrt.org
+
 config ARCH_IXDP425
        bool "IXDP425"
        help
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -22,6 +22,7 @@ obj-pci-$(CONFIG_MACH_ARCOM_VULCAN)   += v
 obj-pci-$(CONFIG_MACH_PRONGHORN)       += pronghorn-pci.o
 obj-pci-$(CONFIG_MACH_SIDEWINDER)      += sidewinder-pci.o
 obj-pci-$(CONFIG_MACH_COMPEXWP18)      += ixdp425-pci.o
+obj-pci-$(CONFIG_MACH_WRT300NV2)               += wrt300nv2-pci.o
 
 obj-y  += common.o
 
@@ -45,6 +46,7 @@ obj-$(CONFIG_MACH_ARCOM_VULCAN)       += vulca
 obj-$(CONFIG_MACH_PRONGHORN)   += pronghorn-setup.o
 obj-$(CONFIG_MACH_SIDEWINDER)  += sidewinder-setup.o
 obj-$(CONFIG_MACH_COMPEXWP18)  += compex42x-setup.o
+obj-$(CONFIG_MACH_WRT300NV2)   += wrt300nv2-setup.o
 
 obj-$(CONFIG_PCI)              += $(obj-pci-$(CONFIG_PCI)) common-pci.o
 obj-$(CONFIG_IXP4XX_QMGR)      += ixp4xx_qmgr.o
--- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
@@ -43,7 +43,8 @@ static __inline__ void __arch_decomp_set
        if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
            machine_is_gateway7001() || machine_is_wg302v2() ||
            machine_is_devixp() || machine_is_miccpt() || machine_is_mic256() ||
-           machine_is_pronghorn() || machine_is_pronghorn_metro())
+           machine_is_pronghorn() || machine_is_pronghorn_metro() ||
+           machine_is_wrt300nv2())
                uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
        else
                uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/wrt300nv2-pci.c
@@ -0,0 +1,64 @@
+/*
+ * arch/arch/mach-ixp4xx/wrt300nv2-pci.c
+ *
+ * PCI setup routines for Linksys WRT300N v2
+ *
+ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * based on coyote-pci.c:
+ *     Copyright (C) 2002 Jungo Software Technologies.
+ *     Copyright (C) 2003 MontaVista Softwrae, Inc.
+ *
+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/mach/pci.h>
+
+extern void ixp4xx_pci_preinit(void);
+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
+
+void __init wrt300nv2_pci_preinit(void)
+{
+       irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
+
+       ixp4xx_pci_preinit();
+}
+
+static int __init wrt300nv2_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+       if (slot == 1)
+               return IRQ_IXP4XX_GPIO8;
+       else return -1;
+}
+
+struct hw_pci wrt300nv2_pci __initdata = {
+       .nr_controllers = 1,
+       .preinit        = wrt300nv2_pci_preinit,
+       .ops            = &ixp4xx_ops,
+       .setup          = ixp4xx_setup,
+       .map_irq        = wrt300nv2_map_irq,
+};
+
+int __init wrt300nv2_pci_init(void)
+{
+       if (machine_is_wrt300nv2())
+               pci_common_init(&wrt300nv2_pci);
+       return 0;
+}
+
+subsys_initcall(wrt300nv2_pci_init);
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
@@ -0,0 +1,110 @@
+/*
+ * arch/arm/mach-ixp4xx/wrt300nv2-setup.c
+ *
+ * Board setup for the Linksys WRT300N v2
+ *
+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
+ *
+ * based on coyote-setup.c:
+ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
+ *
+ * Author: Imre Kaloz <Kaloz@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_8250.h>
+#include <linux/slab.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+static struct flash_platform_data wrt300nv2_flash_data = {
+       .map_name       = "cfi_probe",
+       .width          = 2,
+};
+
+static struct resource wrt300nv2_flash_resource = {
+       .flags          = IORESOURCE_MEM,
+};
+
+static struct platform_device wrt300nv2_flash = {
+       .name           = "IXP4XX-Flash",
+       .id             = 0,
+       .dev            = {
+               .platform_data = &wrt300nv2_flash_data,
+       },
+       .num_resources  = 1,
+       .resource       = &wrt300nv2_flash_resource,
+};
+
+static struct resource wrt300nv2_uart_resource = {
+       .start  = IXP4XX_UART2_BASE_PHYS,
+       .end    = IXP4XX_UART2_BASE_PHYS + 0x0fff,
+       .flags  = IORESOURCE_MEM,
+};
+
+static struct plat_serial8250_port wrt300nv2_uart_data[] = {
+       {
+               .mapbase        = IXP4XX_UART2_BASE_PHYS,
+               .membase        = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+               .irq            = IRQ_IXP4XX_UART2,
+               .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+               .iotype         = UPIO_MEM,
+               .regshift       = 2,
+               .uartclk        = IXP4XX_UART_XTAL,
+       },
+       { },
+};
+
+static struct platform_device wrt300nv2_uart = {
+       .name           = "serial8250",
+       .id             = PLAT8250_DEV_PLATFORM,
+       .dev                    = {
+               .platform_data  = wrt300nv2_uart_data,
+       },
+       .num_resources  = 1,
+       .resource       = &wrt300nv2_uart_resource,
+};
+
+static struct platform_device *wrt300nv2_devices[] __initdata = {
+       &wrt300nv2_flash,
+       &wrt300nv2_uart
+};
+
+static void __init wrt300nv2_init(void)
+{
+       ixp4xx_sys_init();
+
+       wrt300nv2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+       wrt300nv2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
+
+       *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
+       *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
+
+       platform_add_devices(wrt300nv2_devices, ARRAY_SIZE(wrt300nv2_devices));
+}
+
+#ifdef CONFIG_MACH_WRT300NV2
+MACHINE_START(WRT300NV2, "Linksys WRT300N v2")
+       /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
+       .map_io         = ixp4xx_map_io,
+       .init_irq       = ixp4xx_init_irq,
+       .init_time      = ixp4xx_timer_init,
+       .atag_offset    = 0x0100,
+       .init_machine   = wrt300nv2_init,
+#if defined(CONFIG_PCI)
+       .dma_zone_size  = SZ_64M,
+#endif
+       .restart        = ixp4xx_restart,
+MACHINE_END
+#endif

Generated by GNU Enscript 1.6.5.90.