OpenWrt – Rev 4
?pathlinks?
From 233c77d4f1d12e4337fba1146d5197f4c0f9107d Mon Sep 17 00:00:00 2001
From: Matthew McClintock <mmcclint@codeaurora.org>
Date: Wed, 25 Jul 2018 10:37:45 +0200
Subject: [PATCH] ARM: dts: qcom: ipq4019: use v2 of the kpss bringup mechanism
v1 was the incorrect choice here and sometimes the board
would not come up properly.
Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
---
arch/arm/boot/dts/qcom-ipq4019.dtsi | 25 +++++++++++++++++--------
1 file changed, 17 insertions(+), 8 deletions(-)
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -52,7 +52,8 @@
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a7";
- enable-method = "qcom,kpss-acc-v1";
+ enable-method = "qcom,kpss-acc-v2";
+ next-level-cache = <&L2>;
qcom,acc = <&acc0>;
qcom,saw = <&saw0>;
reg = <0x0>;
@@ -71,7 +72,8 @@
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a7";
- enable-method = "qcom,kpss-acc-v1";
+ enable-method = "qcom,kpss-acc-v2";
+ next-level-cache = <&L2>;
qcom,acc = <&acc1>;
qcom,saw = <&saw1>;
reg = <0x1>;
@@ -90,7 +92,8 @@
cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a7";
- enable-method = "qcom,kpss-acc-v1";
+ enable-method = "qcom,kpss-acc-v2";
+ next-level-cache = <&L2>;
qcom,acc = <&acc2>;
qcom,saw = <&saw2>;
reg = <0x2>;
@@ -109,7 +112,8 @@
cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a7";
- enable-method = "qcom,kpss-acc-v1";
+ enable-method = "qcom,kpss-acc-v2";
+ next-level-cache = <&L2>;
qcom,acc = <&acc3>;
qcom,saw = <&saw3>;
reg = <0x3>;
@@ -124,6 +128,11 @@
>;
clock-latency = <256000>;
};
+
+ L2: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ };
};
pmu {
@@ -292,22 +301,22 @@
};
acc0: clock-controller@b088000 {
- compatible = "qcom,kpss-acc-v1";
+ compatible = "qcom,kpss-acc-v2";
reg = <0x0b088000 0x1000>, <0xb008000 0x1000>;
};
acc1: clock-controller@b098000 {
- compatible = "qcom,kpss-acc-v1";
+ compatible = "qcom,kpss-acc-v2";
reg = <0x0b098000 0x1000>, <0xb008000 0x1000>;
};
acc2: clock-controller@b0a8000 {
- compatible = "qcom,kpss-acc-v1";
+ compatible = "qcom,kpss-acc-v2";
reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>;
};
acc3: clock-controller@b0b8000 {
- compatible = "qcom,kpss-acc-v1";
+ compatible = "qcom,kpss-acc-v2";
reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>;
};