OpenWrt – Rev 1

Subversion Repositories:
Rev:
/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 *
 * Copyright (c) 2018 Peng Zhang <sd20@qxwlan.com>
 *
 */

#include "qcom-ipq4019-qxwlan-e2600ac.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
        model = "Qxwlan E2600AC c1";
        compatible = "qxwlan,e2600ac-c1";
};

&blsp1_spi1 {
        pinctrl-0 = <&spi_0_pins>;
        pinctrl-names = "default";
        status = "okay";
        cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;

        flash@0 {
                reg = <0>;
                compatible = "jedec,spi-nor";
                spi-max-frequency = <24000000>;

                partitions {
                        compatible = "fixed-partitions";
                        #address-cells = <1>;
                        #size-cells = <1>;

                        partition@0 {
                                label = "0:SBL1";
                                reg = <0x0 0x40000>;
                                read-only;
                        };
                        partition@40000 {
                                label = "0:MIBIB";
                                reg = <0x40000 0x20000>;
                                read-only;
                        };
                        partition@60000 {
                                label = "0:QSEE";
                                reg = <0x60000 0x60000>;
                                read-only;
                        };
                        partition@c0000 {
                                label = "0:CDT";
                                reg = <0xc0000 0x10000>;
                                read-only;
                        };
                        partition@d0000 {
                                label = "0:DDRPARAMS";
                                reg = <0xd0000 0x10000>;
                                read-only;
                        };
                        partition@e0000 {
                                label = "0:APPSBLENV";
                                reg = <0xe0000 0x10000>;
                                read-only;
                        };
                        partition@f0000 {
                                label = "0:APPSBL";
                                reg = <0xf0000 0x80000>;
                                read-only;
                        };
                        partition@170000 {
                                label = "0:ART";
                                reg = <0x170000 0x10000>;
                                read-only;
                        };
                        partition@180000 {
                                compatible = "denx,fit";
                                label = "firmware";
                                reg = <0x180000 0x1e80000>;
                        };
                };
        };
};