OpenWrt – Rev 4
?pathlinks?
#
# Copyright (C) 2009-2018 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
# Cook a "WRGG" image, this board is apparently one in the D-Link
# WRGG family and uses the exact same firmware format as other
# D-Link devices.
define Build/dir685-images
mkwrggimg -i $(IMAGE_KERNEL) \
-o $@.new \
-d /dev/mtdblock/1 \
-s wrgns01_dlwbr_dir685RBWW \
-v 'N/A' \
-m dir685 \
-B 96bb
mv $@.new $@
endef
# Build D-Link DNS-313 images using the special header tool.
# rootfs.tgz and rd.tgz contains nothing, we only need them
# to satisfy the boot loader on the device. The zImage is
# the only real content.
define Build/dns313-images
mkdir -p $@.tmp/.boot
chmod 755 $@.tmp/.boot
echo "dummy" > $@.tmp/dummyfile
dns313-header $@.tmp/dummyfile \
$@.tmp/.boot/rootfs.tgz
dns313-header $@.tmp/dummyfile \
$@.tmp/.boot/rd.gz
dns313-header $(IMAGE_KERNEL) \
$@.tmp/.boot/zImage
rm $@.tmp/dummyfile
genext2fs --block-size $(BLOCKSIZE:%k=%Ki) \
--size-in-blocks $$((1024 * $(CONFIG_TARGET_KERNEL_PARTSIZE))) \
--squash-uids \
--root $@.tmp $@.tmp-boot
# The device firmware needs revision 1 of EXT2
tune2fs -O filetype $@.tmp-boot
e2fsck -pDf $@.tmp-boot > /dev/null
./dns313_gen_hdd_img.sh $@ $@.tmp-boot $(IMAGE_ROOTFS) \
$(CONFIG_TARGET_KERNEL_PARTSIZE) \
$(CONFIG_TARGET_ROOTFS_PARTSIZE)
rm -rf $@.tmp
endef
define Build/wiligear-image
$(STAGING_DIR_HOST)/bin/mkfwimage2 \
-m GEOS -f 0x30000000 -z \
-v $(1).v5.00.SL3512.OpenWrt.00000.000000.000000 \
-p Kernel:0x020000:0x100000:0:0:$(IMAGE_KERNEL) \
-p Ramdisk:0x120000:0x500000:0:0:$@ \
-o $@.new
mv $@.new $@
endef
# Create the special NAS4220B and Itian Square One SQ201 image
# format with the squashfs and overlay inside the "rd.gz" file.
# We pad it out to 6144K which is the size of the initramfs partition.
#
# The "application" partition is just blank. You can put anything
# there when using OpenWRT. We just use that to create the
# "sysupgrade" firmware image.
define Build/nas4220b-sq201-images
mkdir -p $@.tmp
mv $@ $@.tmp/rd.gz
dd if=/dev/zero of=$@.tmp/hddapp.tgz bs=6144k count=1
cp $(IMAGE_KERNEL) $@.tmp/zImage
cp ./ImageInfo-$(1) $@.tmp/ImageInfo
sed -i -e "s/DATESTR/`date +%Y%m%d $(if $(SOURCE_DATE_EPOCH),--date "@$(SOURCE_DATE_EPOCH)")`/g" $@.tmp/ImageInfo
(cd $@.tmp; tar --sort=name --owner=0 --group=0 --numeric-owner -czf $@ * \
$(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)"))
rm -rf $@.tmp
endef
# WBD-111 and WBD-222:
# work around the bootloader's bug with extra nops
# FIXME: is this really needed now that we no longer append the code
# to change the machine ID number? Needs testing on Wiliboard.
define Build/wbd-nops
mv $@ $@.tmp
echo -en "\x00\x00\xa0\xe1\x00\x00\xa0\xe1\x00\x00\xa0\xe1\x00\x00\xa0\xe1" > $@
cat $@.tmp >> $@
rm -f $@.tmp
endef
# All DTB files are prefixed with "gemini-"
define Device/Default
PROFILES := Default
KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
KERNEL_NAME := zImage
KERNEL := kernel-bin | append-dtb
BLOCKSIZE := 128k
endef
# A reasonable set of default packages handling the NAS type
# of devices out of the box (former NAS42x0 IcyBox defaults)
GEMINI_NAS_PACKAGES:=kmod-md-mod kmod-md-linear kmod-md-multipath \
kmod-md-raid0 kmod-md-raid1 kmod-md-raid10 kmod-md-raid456 \
kmod-fs-btrfs kmod-fs-cifs kmod-fs-nfs \
kmod-fs-nfsd kmod-fs-ntfs kmod-fs-reiserfs kmod-fs-vfat \
kmod-nls-utf8 kmod-usb-storage-extras \
samba36-server mdadm cfdisk fdisk e2fsprogs badblocks \
partx-utils
define Device/dlink_dir-685
DEVICE_TITLE := D-Link DIR-685 Xtreme N Storage Router
DEVICE_DTS := gemini-dlink-dir-685
DEVICE_PACKAGES := $(GEMINI_NAS_PACKAGES) \
kmod-switch-rtl8366rb swconfig \
kmod-rt2800-pci
IMAGES := factory.bin
IMAGE/factory.bin := dir685-images
endef
TARGET_DEVICES += dlink_dir-685
define Device/dlink_dns-313
DEVICE_TITLE := D-Link DNS-313 1-Bay Network Storage Enclosure
DEVICE_DTS := gemini-dlink-dns-313
DEVICE_PACKAGES := $(GEMINI_NAS_PACKAGES)
BLOCKSIZE := 1k
FILESYSTEMS := ext4
IMAGES := factory.bin.gz
IMAGE/factory.bin.gz := dns313-images | gzip
endef
TARGET_DEVICES += dlink_dns-313
define Device/itian-raidsonic
IMAGES := factory.bin
IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 6144k | \
nas4220b-sq201-images $(1)
DEVICE_PACKAGES := $(GEMINI_NAS_PACKAGES)
endef
define Device/itian_sq201
$(Device/itian-raidsonic)
DEVICE_TITLE := ITian Square One SQ201
DEVICE_DTS := gemini-sq201
DEVICE_PACKAGES += kmod-rt61-pci kmod-usb2-pci
endef
TARGET_DEVICES += itian_sq201
define Device/raidsonic_ib-4220-b
$(Device/itian-raidsonic)
DEVICE_TITLE := Raidsonic NAS IB-4220-B
DEVICE_DTS := gemini-nas4220b
endef
TARGET_DEVICES += raidsonic_ib-4220-b
# The wiliboard images need some changes to be functional and buildable.
#
# The dts would need to use the ecoscentric,redboot-fis-partitions partition
# parser to get the correct partition offsets and size.
#
# The mkfwimage2 call need to be adjusted to reflect the real size of kernel
# and rootfs. It is expected that the OEM firmware adjusts the on flash
# partition table with the values defined in the image header.
define Device/wiliboard_wbd111
DEVICE_TITLE := Wiliboard WBD-111
DEVICE_DTS := gemini-wbd111
KERNEL := kernel-bin | append-dtb | wbd-nops
IMAGES := factory.bin
IMAGE/factory.bin := append-rootfs | pad-rootfs | wiligear-image "WILI-S.WILIBOARD"
endef
define Device/wiliboard_wbd222
DEVICE_TITLE := Wiliboard WBD-222
DEVICE_DTS := gemini-wbd222
KERNEL := kernel-bin | append-dtb | wbd-nops
IMAGES := factory.bin
IMAGE/factory.bin := append-rootfs | pad-rootfs | wiligear-image "WILI-S.WBD222"
endef
$(eval $(call BuildImage))