OpenWrt – Rev 1
?pathlinks?
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -357,6 +357,73 @@ static struct board_info __initdata boar
},
};
+static struct sprom_fixup __initdata ad1018_fixups[] = {
+ { .offset = 6, .value = 0x1c00 },
+ { .offset = 65, .value = 0x1256 },
+ { .offset = 96, .value = 0x2046 },
+ { .offset = 97, .value = 0xfe69 },
+ { .offset = 98, .value = 0x1726 },
+ { .offset = 99, .value = 0xfa5c },
+ { .offset = 112, .value = 0x2046 },
+ { .offset = 113, .value = 0xfea8 },
+ { .offset = 114, .value = 0x1978 },
+ { .offset = 115, .value = 0xfa26 },
+ { .offset = 161, .value = 0x2222 },
+ { .offset = 169, .value = 0x2222 },
+ { .offset = 171, .value = 0x2222 },
+ { .offset = 173, .value = 0x2222 },
+ { .offset = 174, .value = 0x4444 },
+ { .offset = 175, .value = 0x2222 },
+ { .offset = 176, .value = 0x4444 },
+};
+
+static struct board_info __initdata board_AD1018 = {
+ .name = "96328avngr",
+ .expected_cpu_id = 0x6328,
+
+ .has_pci = 1,
+ .use_fallback_sprom = 1,
+
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+ .num_usbh_ports = 1,
+
+ .has_enetsw = 1,
+
+ .enetsw = {
+ .used_ports = {
+ [0] = {
+ .used = 1,
+ .phy_id = 1,
+ .name = "FIBRE",
+ },
+ [1] = {
+ .used = 1,
+ .phy_id = 2,
+ .name = "LAN3",
+ },
+ [2] = {
+ .used = 1,
+ .phy_id = 3,
+ .name = "LAN2",
+ },
+ [3] = {
+ .used = 1,
+ .phy_id = 4,
+ .name = "LAN1",
+ },
+ },
+ },
+
+ .fallback_sprom = {
+ .type = SPROM_BCM43217,
+ .pci_bus = 1,
+ .pci_dev = 0,
+ .board_fixups = ad1018_fixups,
+ .num_board_fixups = ARRAY_SIZE(ad1018_fixups),
+ },
+};
+
static struct sprom_fixup __initdata ar5381u_fixups[] = {
{ .offset = 97, .value = 0xfee5 },
{ .offset = 98, .value = 0x157c },
@@ -2607,6 +2674,7 @@ static const struct board_info __initcon
#endif
#ifdef CONFIG_BCM63XX_CPU_6328
&board_96328avng,
+ &board_AD1018,
&board_AR5381u,
&board_AR5387un,
&board_963281TAN,
@@ -2721,6 +2789,7 @@ static struct of_device_id const bcm963x
{ .compatible = "d-link,dsl-274xb-f", .data = &board_dsl_274xb_f1, },
{ .compatible = "nucom,r5010unv2", .data = &board_R5010UNV2, },
{ .compatible = "sagem,f@st2704v2", .data = &board_FAST2704V2, },
+ { .compatible = "sercomm,ad1018-nor", .data = &board_AD1018, },
#endif
#ifdef CONFIG_BCM63XX_CPU_6338
{ .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },