OpenWrt – Rev 4

?pathlinks?

Go to most recent revision – Blame – Last modification – View Log – Download

/dts-v1/;

#include "bcm6328.dtsi"

#include <dt-bindings/input/input.h>

/ {
        model = "Sercomm AD1018 (SPI flash mod)";
        compatible = "sercomm,ad1018-nor", "brcm,bcm6328";

        chosen {
                bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
                stdout-path = "serial0:115200n8";
        };

        keys {
                compatible = "gpio-keys-polled";
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;

                wps {
                        label = "wps";
                        gpios = <&pinctrl 24 1>;
                        linux,code = <KEY_WPS_BUTTON>;
                        debounce-interval = <60>;
                };

                wifi {
                        label = "wifi";
                        gpios = <&pinctrl 25 1>;
                        linux,code = <KEY_WLAN>;
                        debounce-interval = <60>;
                };

                reset {
                        label = "reset";
                        gpios = <&pinctrl 31 1>;
                        linux,code = <KEY_RESTART>;
                        debounce-interval = <60>;
                };
        };
};

&pinctrl {
        pinctrl_leds: leds {
                function = "led";
                pins = "gpio0", "gpio1";
        };
};

&leds {
        status = "ok";

        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_leds &pinctrl_serial_led
                     &pinctrl_ephy0_spd_led &pinctrl_ephy1_act_led
                     &pinctrl_ephy2_act_led &pinctrl_ephy3_act_led>;

        brcm,serial-leds;
        brcm,serial-shift-inv;
        brcm,serial-dat-low;

        inet_red@0 {
                reg = <0>;
                active-low;
                label = "AD1018:red:internet";
        };

        inet_green@1 {
                reg = <1>;
                active-low;
                label = "AD1018:green:internet";
        };

        power_green@8 {
                reg = <8>;
                active-low;
                label = "AD1018:green:power";
                default-state = "on";
        };

        adsl_green@10 {
                reg = <10>;
                active-low;
                label = "AD1018:green:adsl";
        };

        adsl_red@11 {
                reg = <11>;
                active-low;
                label = "AD1018:red:adsl";
        };

        phone_green@12 {
                reg = <12>;
                active-low;
                label = "AD1018:green:phone";
        };

        wps_green@13 {
                reg = <13>;
                active-low;
                label = "AD1018:green:wps";
        };

        wifi_green@14 {
                reg = <14>;
                active-low;
                label = "AD1018:green:wifi";
        };

        usb_green@15 {
                reg = <15>;
                active-low;
                label = "AD1018:green:usb";
        };

        ephy0_spd@17 {
                reg = <17>;
                brcm,hardware-controlled;
        };
};

&hsspi {
        status = "ok";

        flash@0 {
                compatible = "jedec,spi-nor";
                spi-max-frequency = <16666667>;
                spi-tx-bus-width = <2>;
                spi-rx-bus-width = <2>;
                reg = <0>;

                #address-cells = <1>;
                #size-cells = <1>;

                partitions {
                        compatible = "brcm,bcm963xx-cfe-nor-partitions";
                };
        };
};

&uart0 {
        status = "ok";
};