OpenWrt – Rev 1

Subversion Repositories:
Rev:
From 03e96644d7a810916fc4997d572577e876908b18 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ren=C3=A9=20Kjellerup?= <rk.katana.steel@gmail.com>
Date: Mon, 1 Oct 2018 15:07:16 -0700
Subject: [PATCH] ARM: dts: BCM5301X: Add basic DT for Linksys EA6500 V2

It is wireless home router based on BCM4708A0 with BCM4360 + BCM4331
wireless chipsets. The BCM4331 5GHz chip currently isn't supported only
due to missing compatible firmware.

Signed-off-by: Rene Kjellerup <rk.katana.steel@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 arch/arm/boot/dts/Makefile                      |  1 +
 arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts | 45 +++++++++++++++++++++++++
 2 files changed, 46 insertions(+)
 create mode 100644 arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts

--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -88,6 +88,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
        bcm4708-asus-rt-ac68u.dtb \
        bcm4708-buffalo-wzr-1750dhp.dtb \
        bcm4708-linksys-ea6300-v1.dtb \
+       bcm4708-linksys-ea6500-v2.dtb \
        bcm4708-luxul-xap-1510.dtb \
        bcm4708-luxul-xwc-1000.dtb \
        bcm4708-netgear-r6250.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+ * Copyright (C) 2018 Rene Kjellerup <rk.katana.steel@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+       compatible = "linksys,ea6500-v2", "brcm,bcm4708";
+       model = "Linksys EA6500 V2";
+
+       chosen {
+               bootargs = "console=ttyS0,115200";
+       };
+
+       memory {
+               reg = <0x00000000 0x08000000>;
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               wps {
+                       label = "WPS";
+                       linux,code = <KEY_WPS_BUTTON>;
+                       gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+               };
+
+               restart {
+                       label = "Reset";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&usb3_phy {
+       status = "okay";
+};

Generated by GNU Enscript 1.6.5.90.