OpenWrt – Rev 4

Subversion Repositories:
Rev:
// SPDX-License-Identifier: GPL-2.0+ OR MIT
/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

#include "qca956x.dtsi"

/ {
        compatible = "xiaomi,mi-router-4q", "qca,qca9560";
        model = "Xiaomi Mi Router 4Q";

        aliases {
                led-boot = &led_yellow;
                led-failsafe = &led_red;
                led-running = &led_blue;
                led-upgrade = &led_red;
        };

        chosen {
                bootargs = "console=ttyS0,115200n8";
        };

        keys {
                compatible = "gpio-keys-polled";
                poll-interval = <100>;

                reset {
                        label = "Reset button";
                        linux,code = <KEY_RESTART>;
                        gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
                };

                wps {
                        label = "WPS/MI button";
                        linux,code = <KEY_WPS_BUTTON>;
                        gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
                };
        };

        leds {
                compatible = "gpio-leds";

                led_red: led_red {
                        label = "mi-router-4q:red:led";
                        gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
                };

                led_yellow: led_yellow {
                        label = "mi-router-4q:yellow:led";
                        gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
                };

                led_blue: led_blue {
                        label = "mi-router-4q:blue:led";
                        gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
                };
        };
};

&uart {
        status = "okay";
};

&gpio {
        status = "okay";
};

&spi {
        status = "okay";
        num-cs = <1>;

        flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <25000000>;

                partitions {
                        compatible = "fixed-partitions";
                        #address-cells = <1>;
                        #size-cells = <1>;

                        partition@0 {
                                label = "u-boot";
                                reg = <0x000000 0x30000>;
                                read-only;
                        };

                        partition@30000 {
                                label = "nvram";
                                reg = <0x030000 0x10000>;
                                read-only;
                        };

                        partition@40000 {
                                label = "boarddata";
                                reg = <0x40000 0x10000>;
                                read-only;
                        };

                        partition@50000 {
                                label = "crash";
                                reg = <0x50000 0x10000>;
                                read-only;
                        };

                        art: partition@60000 {
                                label = "art";
                                reg = <0x60000 0x10000>;
                                read-only;
                        };

                        partition@70000 {
                                label = "cfg_bak";
                                reg = <0x70000 0x20000>;
                                read-only;
                        };

                        partition@90000 {
                                label = "overlay";
                                reg = <0x90000 0x170000>;
                                read-only;
                        };

                        partition@200000 {
                                compatible = "denx,uimage";
                                label = "firmware";
                                reg = <0x200000 0xe00000>;
                        };
                };
        };
};

&eth0 {
        status = "okay";

        phy-handle = <&swphy4>;
        mtd-mac-address = <&art 0x0>;
};

&eth1 {
        status = "okay";

        mtd-mac-address = <&art 0x6>;
};

&wmac {
        status = "okay";

        mtd-cal-data = <&art 0x1000>;
        mtd-mac-address = <&art 0x0>;
        mtd-mac-address-increment = <1>;
};