OpenWrt – Rev 4

Subversion Repositories:
Rev:
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

#include "ar9344.dtsi"

/ {
        model = "Winchannel WB2000";
        compatible = "winchannel,wb2000", "qca,ar9344";

        chosen {
                bootargs = "console=ttyS0,115200n8";
        };

        aliases {
                led-boot = &led_system;
                led-failsafe = &led_system;
                led-running = &led_system;
                led-upgrade = &led_system;
        };

        i2c {
                compatible = "i2c-gpio";
                gpios = <&gpio 17 GPIO_ACTIVE_HIGH
                         &gpio 16 GPIO_ACTIVE_HIGH
                        >;
                #address-cells = <1>;
                #size-cells = <0>;

                rtc@68 {
                        compatible = "dallas,ds1339";
                        reg = <0x68>;
                };
        };

        leds {
                compatible = "gpio-leds";

                wlan2g {
                        label = "wb2000:green:2g";
                        gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
                        linux,default-trigger = "phy0tpt";
                };

                usb {
                        label = "wb2000:green:usb";
                        gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
                        trigger-sources = <&hub_port1>, <&hub_port2>;
                        linux,default-trigger = "usbport";
                };

                led_system: system {
                        label = "wb2000:green:system";
                        gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
                        default-state = "on";
                };
        };

        keys {
                compatible = "gpio-keys-polled";
                poll-interval = <50>;

                reset {
                        linux,code = <KEY_RESTART>;
                        gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
                        debounce-interval = <60>;
                };
        };

        ath9k-leds {
                compatible = "gpio-leds";

                wlan {
                        label = "wb2000:green:5g";
                        gpios = <&ath9k 6 GPIO_ACTIVE_LOW>;
                        linux,default-trigger = "phy1tpt";
                };
        };
};

&ref {
        clock-frequency = <40000000>;
};

&uart {
        status = "okay";
};

&spi {
        num-cs = <1>;

        status = "okay";

        flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <25000000>;

                partitions {
                        compatible = "fixed-partitions";
                        #address-cells = <1>;
                        #size-cells = <1>;

                        partition@0 {
                                label = "u-boot";
                                reg = <0x0 0x40000>;
                                read-only;
                        };

                        partition@40000 {
                                label = "u-boot-env";
                                reg = <0x40000 0x10000>;
                                read-only;
                        };

                        partition@50000 {
                                label = "firmware";
                                reg = <0x50000 0xf80000>;
                                compatible = "denx,uimage";
                        };

                        partition@fd0000 {
                                label = "nvram";
                                reg = <0xfd0000 0x10000>;
                                read-only;
                        };

                        art: partition@fe0000 {
                                label = "art";
                                reg = <0xfe0000 0x10000>;
                                read-only;
                        };

                        addr: partition@ff0000 {
                                label = "addr";
                                reg = <0xff0000 0x10000>;
                                read-only;
                        };
                };
        };
};

&pcie {
        status = "okay";

        ath9k: wifi@0,0 {
                compatible = "pci168c,0030";
                reg = <0x0000 0 0 0 0>;
                qca,no-eeprom;
                mtd-mac-address = <&addr 0x0>;
                mtd-mac-address-increment = <0x10>;
                #gpio-cells = <2>;
                gpio-controller;
        };
};

&usb {
        #address-cells = <1>;
        #size-cells = <0>;
        status = "okay";

        port@1 {
                #address-cells = <1>;
                #size-cells = <0>;
                reg = <1>;
                #trigger-source-cells = <0>;

                hub_port1: port@1 {
                        reg = <1>;
                        #trigger-source-cells = <0>;
                };

                hub_port2: port@2 {
                        reg = <2>;
                        #trigger-source-cells = <0>;
                };
        };
};

&usb_phy {
        status = "okay";
};

&wmac {
        status = "okay";

        mtd-cal-data = <&art 0x1000>;
        mtd-mac-address = <&addr 0x0>;
};

&mdio0 {
        status = "okay";

        phy-mask = <0x10>;

        phy4: ethernet-phy@4 {
                reg = <4>;
        };
};

&eth0 {
        status = "okay";

        pll-data = <0xe000000 0x04000101 0x04001313>;

        mtd-mac-address = <&addr 0x0>;
        mtd-mac-address-increment = <0x21>;

        phy-mode = "rgmii-rxid";
        phy-handle = <&phy4>;

        gmac-config {
                device = <&gmac>;
                rgmii-gmac0 = <1>;
                rxd-delay = <1>;
                rxdv-delay = <1>;
        };
};