OpenWrt – Rev 1

Subversion Repositories:
Rev:
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

#include "ar9344.dtsi"

/ {
        compatible = "iodata,etg3-r", "qca,ar9344";
        model = "I-O DATA ETG3-R";

        aliases {
                led-boot = &power;
                led-failsafe = &power;
                led-running = &power;
                led-upgrade = &power;
        };

        leds {
                compatible = "gpio-leds";

                power: power {
                        label = "etg3-r:green:power";
                        gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
                        default-state = "on";
                };

                notification {
                        label = "etg3-r:green:notification";
                        gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
                };
        };

        keys {
                compatible = "gpio-keys-polled";
                poll-interval = <20>;

                reset {
                        label = "reset";
                        linux,code = <KEY_RESTART>;
                        gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
                        debounce-interval = <60>;
                };
        };
};

&ref {
        clock-frequency = <40000000>;
};

&spi {
        num-cs = <1>;
        status = "okay";

        flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <25000000>;

                partitions {
                        compatible = "fixed-partitions";
                        #address-cells = <1>;
                        #size-cells = <1>;

                        partition@0 {
                                label = "u-boot";
                                reg = <0x000000 0x040000>;
                                read-only;
                        };

                        partition@40000 {
                                label = "u-boot-env";
                                reg = <0x040000 0x010000>;
                        };

                        partition@50000 {
                                compatible = "denx,uimage";
                                label = "firmware";
                                reg = <0x050000 0x780000>;
                        };

                        partition@7d0000 {
                                label = "Config";
                                reg = <0x07d0000 0x10000>;
                                read-only;
                        };

                        partition@7e0000 {
                                label = "Rsv";
                                reg = <0x07e0000 0x10000>;
                                read-only;
                        };

                        partition@7f0000 {
                                label = "ART";
                                reg = <0x7f0000 0x010000>;
                                read-only;
                        };
                };
        };
};

&mdio0 {
        status = "okay";

        phy0: ethernet-phy@0 {
                reg = <0>;
                phy-mode = "rgmii";

                qca,ar8327-initvals = <
                        0x04 0x07600000 /* PORT0 PAD MODE CTRL */
                        0x50 0xffb7ffb7 /* LED_CTRL0 */
                        0x54 0xffb7ffb7 /* LED_CTRL1 */
                        0x58 0xffb7ffb7 /* LED_CTRL2 */
                        0x5c 0x03ffff00 /* LED_CTRL3 */
                        0x7c 0x0000007e /* PORT0_STATUS */
                >;
        };
};

&eth0 {
        status = "okay";

        pll-data = <0x0e000000 0x00000101 0x00001616>;

        phy-mode = "rgmii";
        phy-handle = <&phy0>;

        gmac-config {
                device = <&gmac>;

                rgmii-gmac0 = <1>;
                rxd-delay = <3>;
                rxdv-delay = <3>;
        };
};

&uart {
        status = "okay";
};