OpenWrt – Rev 4

Subversion Repositories:
Rev:
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

#include "ar7241.dtsi"

/ {
        compatible = "tplink,tl-wr842n-v1", "qca,ar7241";
        model = "TP-Link TL-WR842N/ND v1";

        aliases {
                led-boot = &led_system;
                led-failsafe = &led_system;
                led-running = &led_system;
                led-upgrade = &led_system;
        };

        keys {
                compatible = "gpio-keys-polled";
                poll-interval = <20>;

                rfkill {
                        label = "rfkill";
                        linux,code = <KEY_RFKILL>;
                        gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
                        debounce-interval = <60>;
                };

                reset {
                        label = "reset";
                        linux,code = <KEY_RESTART>;
                        gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
                        debounce-interval = <60>;
                };
        };

        gpio-leds {
                compatible = "gpio-leds";

                led_system: system {
                        label = "tp-link:green:system";
                        gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
                };

                qss {
                        label = "tp-link:green:qss";
                        gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
                };

                led3g {
                        label = "tp-link:green:3g";
                        gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
                        trigger-sources = <&hub_port>;
                        linux,default-trigger = "usbport";
                };
        };

        ath9k-leds {
                compatible = "gpio-leds";

                wlan {
                        label = "tp-link:green:wlan";
                        gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
                        linux,default-trigger = "phy0tpt";
                };
        };

        gpio-export {
                compatible = "gpio-export";

                gpio_usb_power {
                        gpio-export,name = "tp-link:power:usb";
                        gpio-export,output = <1>;
                        gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
                };
        };
};

&usb {
        #address-cells = <1>;
        #size-cells = <0>;
        status = "okay";

        hub_port: port@1 {
                reg = <1>;
                #trigger-source-cells = <0>;
        };
};

&usb_phy {
        status = "okay";
};

&spi {
        status = "okay";
        num-cs = <1>;

        flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <25000000>;

                partitions {
                        compatible = "fixed-partitions";
                        #address-cells = <1>;
                        #size-cells = <1>;

                        uboot: partition@0 {
                                reg = <0x0 0x20000>;
                                label = "u-boot";
                                read-only;
                        };

                        partition@20000 {
                                compatible = "tplink,firmware";
                                reg = <0x20000 0x7d0000>;
                                label = "firmware";
                        };

                        partition@7f0000 {
                                reg = <0x7f0000 0x10000>;
                                label = "art";
                                read-only;
                        };
                };
        };
};

&pcie {
        status = "okay";

        ath9k: wifi@0,0 {
                compatible = "pci168c,002e";
                reg = <0x0000 0 0 0 0>;
                #gpio-cells = <2>;
                gpio-controller;
                qca,no-eeprom;
                mtd-mac-address = <&uboot 0x1fc00>;
        };
};

&eth0 {
        status = "okay";

        mtd-mac-address = <&uboot 0x1fc00>;
        mtd-mac-address-increment = <(-1)>;
};

&eth1 {
        status = "okay";

        mtd-mac-address = <&uboot 0x1fc00>;
        mtd-mac-address-increment = <1>;
};

&gpio {
        status = "okay";
};

&uart {
        status = "okay";
};