OpenWrt – Rev 1

Subversion Repositories:
Rev:
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

#include "ar9344.dtsi"

/ {
        compatible = "iodata,wn-ag300dgr", "qca,ar9344";
        model = "I-O DATA WN-AG300DGR";

        aliases {
                led-boot = &router;
                led-failsafe = &router;
                led-running = &router;
                led-upgrade = &router;
        };

        leds {
                compatible = "gpio-leds";

                router: router {
                        label = "wn-ag300dgr:green:router";
                        gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
                        default-state = "on";
                };

                children {
                        label = "wn-ag300dgr:green:children";
                        gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
                };

                eco {
                        label = "wn-ag300dgr:green:eco";
                        gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
                };

                notification {
                        label = "wn-ag300dgr:amber:notification";
                        gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
                };

                wlan2g {
                        label = "wn-ag300dgr:green:wlan2g";
                        gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
                        linux,default-trigger = "phy0tpt";
                };

                wlan5g {
                        label = "wn-ag300dgr:green:wlan5g";
                        gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
                        linux,default-trigger = "phy1tpt";
                };
        };

        keys {
                compatible = "gpio-keys-polled";
                poll-interval = <20>;

                eco {
                        label = "eco";
                        gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
                        linux,code = <BTN_1>;
                        debounce-interval = <60>;
                };

                router {
                        label = "router";
                        gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
                        linux,code = <BTN_0>;
                        linux,input-type = <EV_SW>;
                        debounce-interval = <60>;
                };

                auto {
                        label = "auto";
                        gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
                        linux,code = <BTN_0>;
                        linux,input-type = <EV_SW>;
                        debounce-interval = <60>;
                };

                wps {
                        label = "wps";
                        gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_WPS_BUTTON>;
                        debounce-interval = <60>;
                };

                reset {
                        label = "reset";
                        gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
                        debounce-interval = <60>;
                };

                children {
                        label = "children";
                        gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
                        linux,code = <BTN_1>;
                        debounce-interval = <60>;
                };
        };
};

&ref {
        clock-frequency = <25000000>;
};

&spi {
        num-cs = <1>;
        status = "okay";

        flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <25000000>;

                partitions {
                        compatible = "fixed-partitions";
                        #address-cells = <1>;
                        #size-cells = <1>;

                        partition@0 {
                                label = "u-boot";
                                reg = <0x000000 0x030000>;
                                read-only;
                        };

                        partition@30000 {
                                label = "u-boot-env";
                                reg = <0x030000 0x010000>;
                                read-only;
                        };

                        partition@40000 {
                                compatible = "denx,uimage";
                                label = "firmware";
                                reg = <0x040000 0xf10000>;
                        };

                        partition@f50000 {
                                label = "manufacture";
                                reg = <0xf50000 0x40000>;
                                read-only;
                        };

                        partition@f90000 {
                                label = "backup";
                                reg = <0xf90000 0x10000>;
                                read-only;
                        };

                        partition@fa0000 {
                                label = "storage";
                                reg = <0xfa0000 0x50000>;
                                read-only;
                        };

                        partition@ff0000 {
                                label = "art";
                                reg = <0xff0000 0x010000>;
                                read-only;
                        };
                };
        };
};

&mdio0 {
        status = "okay";

        phy0: ethernet-phy@0 {
                reg = <0>;
                phy-mode = "rgmii";

                qca,ar8327-initvals = <
                        0x04 0x07a00000 /* PORT0 PAD MODE CTRL */
                        0x7c 0x000000fe /* PORT0_STATUS */
                >;
        };
};

&eth0 {
        status = "okay";

        pll-data = <0x06000000 0x00000101 0x00001616>;

        phy-mode = "rgmii";
        phy-handle = <&phy0>;

        gmac-config {
                device = <&gmac>;
                rgmii-gmac0 = <1>;
        };
};

&pcie {
        status = "okay";
};

&uart {
        status = "okay";
};

&usb {
        status = "okay";
};

&usb_phy {
        status = "okay";
};

&wmac {
        status = "okay";
        qca,no-eeprom;
};