OpenWrt – Rev 4

Subversion Repositories:
Rev:
/*
 *  MikroTik RouterBOARD SXT Lite support
 *
 *  Copyright (C) 2012 Stijn Tintel <stijn@linux-ipv6.be>
 *  Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
 *  Copyright (C) 2013 Vyacheslav Adamanov <adamanov@gmail.com>
 *
 *  This program is free software; you can redistribute it and/or modify it
 *  under the terms of the GNU General Public License version 2 as published
 *  by the Free Software Foundation.
 */

#define pr_fmt(fmt) "sxtlite: " fmt

#include <linux/version.h>
#include <linux/phy.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/ath9k_platform.h>
#include <linux/mtd/mtd.h>
#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0)
#include <linux/mtd/nand.h>
#else
#include <linux/mtd/rawnand.h>
#endif
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/rle.h>
#include <linux/routerboot.h>
#include <linux/gpio.h>
#include <linux/version.h>

#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
#include "dev-ap9x-pci.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-eth.h"
#include "dev-m25p80.h"
#include "dev-nfc.h"
#include "dev-wmac.h"
#include "dev-usb.h"
#include "machtypes.h"
#include "routerboot.h"
#include <linux/ar8216_platform.h>

#define SXTLITE_GPIO_NAND_NCE  14
#define SXTLITE_GPIO_LED_USER 3
#define SXTLITE_GPIO_LED_1 13
#define SXTLITE_GPIO_LED_2 12
#define SXTLITE_GPIO_LED_3 4
#define SXTLITE_GPIO_LED_4 21
#define SXTLITE_GPIO_LED_5 18
#define SXTLITE_GPIO_LED_POWER 11

#define SXTLITE_GPIO_BUZZER 19

#define SXTLITE_GPIO_BTN_RESET 15

#define SXTLITE_KEYS_POLL_INTERVAL 20
#define SXTLITE_KEYS_DEBOUNCE_INTERVAL (3 * SXTLITE_KEYS_POLL_INTERVAL)

static struct mtd_partition rbsxtlite_nand_partitions[] = {
        {
                .name   = "booter",
                .offset = 0,
                .size   = (256 * 1024),
                .mask_flags = MTD_WRITEABLE,
        },
        {
                .name   = "kernel",
                .offset = (256 * 1024),
                .size   = (4 * 1024 * 1024) - (256 * 1024),
        },
        {
                .name   = "ubi",
                .offset = MTDPART_OFS_NXTBLK,
                .size   = MTDPART_SIZ_FULL,
        },
};

static struct gpio_led rbsxtlite_leds_gpio[] __initdata = {
        {
                .name           =       "rb:green:user",
                .gpio           =       SXTLITE_GPIO_LED_USER,
                .active_low     =       1,
        },
        {
                .name           =       "rb:green:led1",
                .gpio           =       SXTLITE_GPIO_LED_1,
                .active_low     =       1,
        },
        {
                .name           =       "rb:green:led2",
                .gpio           =       SXTLITE_GPIO_LED_2,
                .active_low     =       1,
        },
        {
                .name           =       "rb:green:led3",
                .gpio           =       SXTLITE_GPIO_LED_3,
                .active_low     =       1,
        },
        {
                .name           =       "rb:green:led4",
                .gpio           =       SXTLITE_GPIO_LED_4,
                .active_low     =       1,
        },
        {
                .name           =       "rb:green:led5",
                .gpio           =       SXTLITE_GPIO_LED_5,
                .active_low     =       1,
        },
        {
                .name           =       "rb:green:power",
                .gpio           =       SXTLITE_GPIO_LED_POWER,
                .default_state  =       LEDS_GPIO_DEFSTATE_ON,
        },
};

static struct gpio_keys_button rbsxtlite_gpio_keys[] __initdata = {
        {
                .desc           =       "Reset button",
                .type           =       EV_KEY,
                .code           =       KEY_RESTART,
                .debounce_interval      =       SXTLITE_KEYS_DEBOUNCE_INTERVAL,
                .gpio           =       SXTLITE_GPIO_BTN_RESET,
                .active_low     =       0,
        },
};

static int __init rbsxtlite_rbinfo_init(void)
{
        const struct rb_info *info;

        info = rb_init_info((void *)(KSEG1ADDR(AR71XX_SPI_BASE)), 0x10000);
        if (!info)
                return -EINVAL;
        return 0;

}

void __init rbsxtlite_wlan_init(void)
{
        char *art_buf;
        u8 wlan_mac[ETH_ALEN];

        art_buf = rb_get_wlan_data();
        if (art_buf == NULL)
                return;

        ath79_init_mac(wlan_mac, ath79_mac_base, 1);
        ath79_register_wmac(art_buf + 0x1000, wlan_mac);

        kfree(art_buf);
}

static void rbsxtlite_nand_select_chip(int chip_no)
{
        switch (chip_no) {
        case 0:
                gpio_set_value(SXTLITE_GPIO_NAND_NCE, 0);
                break;
        default:
                gpio_set_value(SXTLITE_GPIO_NAND_NCE, 1);
                break;
        }
        ndelay(500);
}

#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
static struct nand_ecclayout rbsxtlite_nand_ecclayout = {
        .eccbytes       = 6,
        .eccpos  = { 8, 9, 10, 13, 14, 15 },
        .oobavail       = 9,
        .oobfree        = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
};

#else

static int rbsxtlite_ooblayout_ecc(struct mtd_info *mtd, int section,
                                   struct mtd_oob_region *oobregion)
{
        switch (section) {
        case 0:
                oobregion->offset = 8;
                oobregion->length = 3;
                return 0;
        case 1:
                oobregion->offset = 13;
                oobregion->length = 3;
                return 0;
        default:
                return -ERANGE;
        }
}

static int rbsxtlite_ooblayout_free(struct mtd_info *mtd, int section,
                                    struct mtd_oob_region *oobregion)
{
        switch (section) {
        case 0:
                oobregion->offset = 0;
                oobregion->length = 4;
                return 0;
        case 1:
                oobregion->offset = 4;
                oobregion->length = 1;
                return 0;
        case 2:
                oobregion->offset = 6;
                oobregion->length = 2;
                return 0;
        case 3:
                oobregion->offset = 11;
                oobregion->length = 2;
                return 0;
        default:
                return -ERANGE;
        }
}

static const struct mtd_ooblayout_ops rbsxtlite_nand_ecclayout_ops = {
        .ecc = rbsxtlite_ooblayout_ecc,
        .free = rbsxtlite_ooblayout_free,
};
#endif /* < 4.6 */

static int rbsxtlite_nand_scan_fixup(struct mtd_info *mtd)
{
#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
        struct nand_chip *chip = mtd->priv;
#endif

        if (mtd->writesize == 512) {
                /*
                * Use the OLD Yaffs-1 OOB layout, otherwise RouterBoot
                * will not be able to find the kernel that we load.
                */
#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
                chip->ecc.layout = &rbsxtlite_nand_ecclayout;
#else
                mtd_set_ooblayout(mtd, &rbsxtlite_nand_ecclayout_ops);
#endif
        }

        return 0;
}

void __init rbsxtlite_gpio_init(void)
{
        gpio_request_one(SXTLITE_GPIO_NAND_NCE, GPIOF_OUT_INIT_HIGH, "NAND nCE");
}

void __init rbsxtlite_nand_init(void)
{
        ath79_nfc_set_scan_fixup(rbsxtlite_nand_scan_fixup);
        ath79_nfc_set_parts(rbsxtlite_nand_partitions,
                           ARRAY_SIZE(rbsxtlite_nand_partitions));
        ath79_nfc_set_select_chip(rbsxtlite_nand_select_chip);
        ath79_nfc_set_swap_dma(true);
        ath79_register_nfc();
}


static void __init rbsxtlite_setup(void)
{
        if(rbsxtlite_rbinfo_init())
                return;
        rbsxtlite_nand_init();
        rbsxtlite_wlan_init();

        ath79_register_leds_gpio(-1, ARRAY_SIZE(rbsxtlite_leds_gpio),
                                 rbsxtlite_leds_gpio);
        ath79_register_gpio_keys_polled(-1, SXTLITE_KEYS_POLL_INTERVAL,
                                        ARRAY_SIZE(rbsxtlite_gpio_keys),
                                        rbsxtlite_gpio_keys);

        ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);

        ath79_register_mdio(1, 0x0);

        /* GMAC0 is left unused */

        /* GMAC1 is connected to MAC0 on the internal switch */
        /* The ethernet port connects to PHY P0, which connects to MAC1
           on the internal switch */
        ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0);
        ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
        ath79_register_eth(1);


}


MIPS_MACHINE(ATH79_MACH_RB_SXTLITE2ND, "sxt2n", "MikroTik RouterBOARD SXT Lite2",
            rbsxtlite_setup);

MIPS_MACHINE(ATH79_MACH_RB_SXTLITE5ND, "sxt5n", "MikroTik RouterBOARD SXT Lite5",
            rbsxtlite_setup);