OpenWrt – Rev 4
?pathlinks?
/*
* TP-Link Archer C60 v1 board support
*
* Copyright (C) 2017 Henryk Heisig <hyniu@o2.pl>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/platform_device.h>
#include <linux/ath9k_platform.h>
#include <linux/ar8216_platform.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include <linux/gpio.h>
#include "common.h"
#include "dev-m25p80.h"
#include "machtypes.h"
#include "pci.h"
#include "dev-ap9x-pci.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-spi.h"
#include "dev-usb.h"
#include "dev-wmac.h"
#define ARCHER_C60_V1_GPIO_LED_LAN 2
#define ARCHER_C60_V1_GPIO_LED_POWER 16
#define ARCHER_C60_V1_GPIO_LED_WLAN2 17
#define ARCHER_C60_V1_GPIO_LED_WLAN5 18
#define ARCHER_C60_V1_GPIO_LED_WPS 19
#define ARCHER_C60_V1_GPIO_LED_WAN_GREEN 20
#define ARCHER_C60_V1_GPIO_LED_WAN_AMBER 22
#define ARCHER_C60_V1_KEYS_POLL_INTERVAL 20
#define ARCHER_C60_V1_KEYS_DEBOUNCE_INTERVAL (3 * ARCHER_C60_V1_KEYS_POLL_INTERVAL)
#define ARCHER_C60_V1_GPIO_BTN_RESET 21
#define ARCHER_C60_V1_GPIO_BTN_RFKILL 1
#define ARCHER_C60_V1_WMAC_CALDATA_OFFSET 0x1000
#define ARCHER_C60_V1_PCI_CALDATA_OFFSET 0x5000
static struct gpio_led archer_c60_v1_leds_gpio[] __initdata = {
{
.name = "archer-c60-v1:green:power",
.gpio = ARCHER_C60_V1_GPIO_LED_POWER,
.active_low = 1,
},
{
.name = "archer-c60-v1:green:wlan2g",
.gpio = ARCHER_C60_V1_GPIO_LED_WLAN2,
.active_low = 1,
},
{
.name = "archer-c60-v1:green:wlan5g",
.gpio = ARCHER_C60_V1_GPIO_LED_WLAN5,
.active_low = 1,
},
{
.name = "archer-c60-v1:green:lan",
.gpio = ARCHER_C60_V1_GPIO_LED_LAN,
.active_low = 1,
},
{
.name = "archer-c60-v1:green:wan",
.gpio = ARCHER_C60_V1_GPIO_LED_WAN_GREEN,
.active_low = 1,
},
{
.name = "archer-c60-v1:amber:wan",
.gpio = ARCHER_C60_V1_GPIO_LED_WAN_AMBER,
.active_low = 1,
},
{
.name = "archer-c60-v1:green:wps",
.gpio = ARCHER_C60_V1_GPIO_LED_WPS,
.active_low = 1,
},
};
static struct gpio_led archer_c60_v2_leds_gpio[] __initdata = {
{
.name = "archer-c60-v2:green:power",
.gpio = ARCHER_C60_V1_GPIO_LED_POWER,
.active_low = 1,
},
{
.name = "archer-c60-v2:green:wlan2g",
.gpio = ARCHER_C60_V1_GPIO_LED_WLAN2,
.active_low = 1,
},
{
.name = "archer-c60-v2:green:wlan5g",
.gpio = ARCHER_C60_V1_GPIO_LED_WLAN5,
.active_low = 1,
},
{
.name = "archer-c60-v2:green:lan",
.gpio = ARCHER_C60_V1_GPIO_LED_LAN,
.active_low = 1,
},
{
.name = "archer-c60-v2:green:wan",
.gpio = ARCHER_C60_V1_GPIO_LED_WAN_GREEN,
.active_low = 1,
},
{
.name = "archer-c60-v2:amber:wan",
.gpio = ARCHER_C60_V1_GPIO_LED_WAN_AMBER,
.active_low = 1,
},
{
.name = "archer-c60-v2:green:wps",
.gpio = ARCHER_C60_V1_GPIO_LED_WPS,
.active_low = 1,
},
};
static struct gpio_keys_button archer_c60_v1_gpio_keys[] __initdata = {
{
.desc = "Reset button",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = ARCHER_C60_V1_KEYS_DEBOUNCE_INTERVAL,
.gpio = ARCHER_C60_V1_GPIO_BTN_RESET,
.active_low = 1,
},
{
.desc = "RFKILL button",
.type = EV_KEY,
.code = KEY_RFKILL,
.debounce_interval = ARCHER_C60_V1_KEYS_DEBOUNCE_INTERVAL,
.gpio = ARCHER_C60_V1_GPIO_BTN_RFKILL,
.active_low = 1,
},
};
static void __init archer_c60_v1_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f010008);
u8 *art = (u8 *) KSEG1ADDR(0x1f7f0000);
ath79_register_m25p80(NULL);
ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c60_v1_leds_gpio),
archer_c60_v1_leds_gpio);
ath79_register_gpio_keys_polled(-1, ARCHER_C60_V1_KEYS_POLL_INTERVAL,
ARRAY_SIZE(archer_c60_v1_gpio_keys),
archer_c60_v1_gpio_keys);
ath79_register_mdio(0, 0x0);
ath79_register_mdio(1, 0x0);
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
/* WAN port */
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
ath79_eth0_data.speed = SPEED_100;
ath79_eth0_data.duplex = DUPLEX_FULL;
ath79_eth0_data.phy_mask = BIT(4);
ath79_register_eth(0);
/* LAN ports */
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
ath79_eth1_data.speed = SPEED_1000;
ath79_eth1_data.duplex = DUPLEX_FULL;
ath79_switch_data.phy_poll_mask |= BIT(4);
ath79_switch_data.phy4_mii_en = 1;
ath79_register_eth(1);
ath79_register_wmac(art + ARCHER_C60_V1_WMAC_CALDATA_OFFSET, mac);
ap91_pci_init(art + ARCHER_C60_V1_PCI_CALDATA_OFFSET, NULL);
}
MIPS_MACHINE(ATH79_MACH_ARCHER_C60_V1, "ARCHER-C60-V1",
"TP-LINK Archer C60 v1", archer_c60_v1_setup);
static void __init archer_c60_v2_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f01fb08);
u8 *art = (u8 *) KSEG1ADDR(0x1f7f0000);
ath79_register_m25p80(NULL);
ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c60_v2_leds_gpio),
archer_c60_v2_leds_gpio);
ath79_register_gpio_keys_polled(-1, ARCHER_C60_V1_KEYS_POLL_INTERVAL,
ARRAY_SIZE(archer_c60_v1_gpio_keys),
archer_c60_v1_gpio_keys);
ath79_register_mdio(0, 0x0);
ath79_register_mdio(1, 0x0);
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
/* WAN port */
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
ath79_eth0_data.speed = SPEED_100;
ath79_eth0_data.duplex = DUPLEX_FULL;
ath79_eth0_data.phy_mask = BIT(4);
ath79_register_eth(0);
/* LAN ports */
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
ath79_eth1_data.speed = SPEED_1000;
ath79_eth1_data.duplex = DUPLEX_FULL;
ath79_switch_data.phy_poll_mask |= BIT(4);
ath79_switch_data.phy4_mii_en = 1;
ath79_register_eth(1);
ath79_register_wmac(art + ARCHER_C60_V1_WMAC_CALDATA_OFFSET, mac);
ap91_pci_init(art + ARCHER_C60_V1_PCI_CALDATA_OFFSET, NULL);
}
MIPS_MACHINE(ATH79_MACH_ARCHER_C60_V2, "ARCHER-C60-V2",
"TP-LINK Archer C60 v2", archer_c60_v2_setup);