OpenWrt – Rev 4
?pathlinks?
From 4b5b79998af61db8b0506fba6c0f33b57ea457bd Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@gmail.com>
Date: Wed, 4 Oct 2017 01:00:13 +0200
Subject: [PATCH 21/25] crypto: crypto4xx - fix stalls under heavy load
If the crypto4xx device is continuously loaded by dm-crypt
and ipsec work, it will start to work intermittent after a
few (between 20-30) seconds, hurting throughput and latency.
This patch contains various stability improvements in order
to fix this issue. So far, the hardware has survived more
than a day without suffering any stalls under the continuous
load.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
---
drivers/crypto/amcc/crypto4xx_core.c | 33 ++++++++++++++++++---------------
drivers/crypto/amcc/crypto4xx_reg_def.h | 3 +++
2 files changed, 21 insertions(+), 15 deletions(-)
--- a/drivers/crypto/amcc/crypto4xx_core.c
+++ b/drivers/crypto/amcc/crypto4xx_core.c
@@ -280,17 +280,20 @@ static u32 crypto4xx_get_pd_from_pdr_nol
static u32 crypto4xx_put_pd_to_pdr(struct crypto4xx_device *dev, u32 idx)
{
struct pd_uinfo *pd_uinfo = &dev->pdr_uinfo[idx];
+ u32 tail;
unsigned long flags;
spin_lock_irqsave(&dev->core_dev->lock, flags);
+ pd_uinfo->state = PD_ENTRY_FREE;
+
if (dev->pdr_tail != PPC4XX_LAST_PD)
dev->pdr_tail++;
else
dev->pdr_tail = 0;
- pd_uinfo->state = PD_ENTRY_FREE;
+ tail = dev->pdr_tail;
spin_unlock_irqrestore(&dev->core_dev->lock, flags);
- return 0;
+ return tail;
}
/**
@@ -854,16 +857,16 @@ int crypto4xx_build_pd(struct crypto_asy
}
}
- sa->sa_command_1.bf.hash_crypto_offset = 0;
- pd->pd_ctl.w = 0;
- pd->pd_ctl.bf.hash_final =
- (crypto_tfm_alg_type(req->tfm) == CRYPTO_ALG_TYPE_AHASH);
- pd->pd_ctl.bf.host_ready = 1;
+ pd->pd_ctl.w = PD_CTL_HOST_READY |
+ ((crypto_tfm_alg_type(req->tfm) == CRYPTO_ALG_TYPE_AHASH) |
+ (crypto_tfm_alg_type(req->tfm) == CRYPTO_ALG_TYPE_AEAD) ?
+ PD_CTL_HASH_FINAL : 0);
pd->pd_ctl_len.w = 0x00400000 | datalen;
pd_uinfo->state = PD_ENTRY_INUSE | (is_busy ? PD_ENTRY_BUSY : 0);
wmb();
/* write any value to push engine to read a pd */
+ writel(0, dev->ce_base + CRYPTO4XX_INT_DESCR_RD);
writel(1, dev->ce_base + CRYPTO4XX_INT_DESCR_RD);
return is_busy ? -EBUSY : -EINPROGRESS;
}
@@ -964,23 +967,23 @@ static void crypto4xx_bh_tasklet_cb(unsi
struct crypto4xx_core_device *core_dev = dev_get_drvdata(dev);
struct pd_uinfo *pd_uinfo;
struct ce_pd *pd;
- u32 tail;
+ u32 tail = core_dev->dev->pdr_tail;
+ u32 head = core_dev->dev->pdr_head;
- while (core_dev->dev->pdr_head != core_dev->dev->pdr_tail) {
- tail = core_dev->dev->pdr_tail;
+ do {
pd_uinfo = &core_dev->dev->pdr_uinfo[tail];
pd = &core_dev->dev->pdr[tail];
if ((pd_uinfo->state & PD_ENTRY_INUSE) &&
- pd->pd_ctl.bf.pe_done &&
- !pd->pd_ctl.bf.host_ready) {
- pd->pd_ctl.bf.pe_done = 0;
+ ((READ_ONCE(pd->pd_ctl.w) &
+ (PD_CTL_PE_DONE | PD_CTL_HOST_READY)) ==
+ PD_CTL_PE_DONE)) {
crypto4xx_pd_done(core_dev->dev, tail);
- crypto4xx_put_pd_to_pdr(core_dev->dev, tail);
+ tail = crypto4xx_put_pd_to_pdr(core_dev->dev, tail);
} else {
/* if tail not done, break */
break;
}
- }
+ } while (head != tail);
}
/**
--- a/drivers/crypto/amcc/crypto4xx_reg_def.h
+++ b/drivers/crypto/amcc/crypto4xx_reg_def.h
@@ -261,6 +261,9 @@ union ce_pd_ctl {
} bf;
u32 w;
} __attribute__((packed));
+#define PD_CTL_HASH_FINAL BIT(4)
+#define PD_CTL_PE_DONE BIT(1)
+#define PD_CTL_HOST_READY BIT(0)
union ce_pd_ctl_len {
struct {