OpenWrt – Rev 4
?pathlinks?
From 339fe73f340161a624cc08e738d2244814852c3e Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 17 Mar 2013 00:55:04 +0100
Subject: [PATCH] rt2x00: load eeprom on SoC from a mtd device defines inside
OF
Signed-off-by: John Crispin <blogic@openwrt.org>
---
drivers/net/wireless/ralink/rt2x00/Kconfig | 1 +
drivers/net/wireless/ralink/rt2x00/rt2x00eeprom.c | 65 +++++++++++++++++++++++
2 files changed, 66 insertions(+)
--- a/drivers/net/wireless/ralink/rt2x00/Kconfig
+++ b/drivers/net/wireless/ralink/rt2x00/Kconfig
@@ -219,6 +219,7 @@ config RT2800SOC
select RT2X00_LIB_EEPROM
select RT2800_LIB
select RT2800_LIB_MMIO
+ select MTD if SOC_RT288X || SOC_RT305X
---help---
This adds support for Ralink WiSoC devices.
Supported chips: RT2880, RT3050, RT3052, RT3350, RT3352.
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00eeprom.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00eeprom.c
@@ -26,11 +26,72 @@
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
#include <linux/of.h>
#include "rt2x00.h"
#include "rt2x00lib.h"
+static int rt2800lib_read_eeprom_mtd(struct rt2x00_dev *rt2x00dev)
+{
+ int ret = -EINVAL;
+#ifdef CONFIG_OF
+ static struct firmware mtd_fw;
+ struct device_node *np = rt2x00dev->dev->of_node, *mtd_np = NULL;
+ size_t retlen, len = rt2x00dev->ops->eeprom_size;
+ int i, size, offset = 0;
+ struct mtd_info *mtd;
+ const char *part;
+ const __be32 *list;
+ phandle phandle;
+
+ list = of_get_property(np, "ralink,mtd-eeprom", &size);
+ if (!list)
+ return -ENOENT;
+
+ phandle = be32_to_cpup(list++);
+ if (phandle)
+ mtd_np = of_find_node_by_phandle(phandle);
+ if (!mtd_np) {
+ dev_err(rt2x00dev->dev, "failed to load mtd phandle\n");
+ return -EINVAL;
+ }
+
+ part = of_get_property(mtd_np, "label", NULL);
+ if (!part)
+ part = mtd_np->name;
+
+ mtd = get_mtd_device_nm(part);
+ if (IS_ERR(mtd)) {
+ dev_err(rt2x00dev->dev, "failed to get mtd device \"%s\"\n", part);
+ return PTR_ERR(mtd);
+ }
+
+ if (size > sizeof(*list))
+ offset = be32_to_cpup(list);
+
+ ret = mtd_read(mtd, offset, len, &retlen, (u_char *) rt2x00dev->eeprom);
+ put_mtd_device(mtd);
+
+ if ((retlen != rt2x00dev->ops->eeprom_size) || ret) {
+ dev_err(rt2x00dev->dev, "failed to load eeprom from device \"%s\"\n", part);
+ return ret;
+ }
+
+ if (of_find_property(np, "ralink,mtd-eeprom-swap", NULL))
+ for (i = 0; i < len/sizeof(u16); i++)
+ rt2x00dev->eeprom[i] = swab16(rt2x00dev->eeprom[i]);
+
+ rt2x00dev->eeprom_file = &mtd_fw;
+ mtd_fw.data = (const u8 *) rt2x00dev->eeprom;
+
+ dev_info(rt2x00dev->dev, "loaded eeprom from mtd device \"%s\"\n", part);
+#endif
+
+ return ret;
+}
+
static const char *
rt2x00lib_get_eeprom_file_name(struct rt2x00_dev *rt2x00dev)
{
@@ -58,6 +119,9 @@ static int rt2x00lib_request_eeprom_file
const char *ee_name;
int retval;
+ if (!rt2800lib_read_eeprom_mtd(rt2x00dev))
+ return 0;
+
ee_name = rt2x00lib_get_eeprom_file_name(rt2x00dev);
if (!ee_name && test_bit(REQUIRE_EEPROM_FILE, &rt2x00dev->cap_flags)) {
rt2x00_err(rt2x00dev, "Required EEPROM name is missing.");