OpenWrt – Rev 1
?pathlinks?
From 58e4bbea0c1d9b5ace11df968c5dc096ce052a73 Mon Sep 17 00:00:00 2001
From: Madhan Mohan R <MadhanMohan.R@cypress.com>
Date: Wed, 21 Nov 2018 07:53:45 +0000
Subject: [PATCH] brcmfmac: set SDIO F1 MesBusyCtrl for CYW4373
Along with F2 watermark (existing) configuration, F1 MesBusyCtrl
should be enabled & sdio device RX FIFO watermark should be
configured to avoid overflow errors.
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Madhan Mohan R <madhanmohan.r@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 3 +++
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h | 9 ++++++++-
2 files changed, 11 insertions(+), 1 deletion(-)
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -4119,6 +4119,9 @@ static void brcmf_sdio_firmware_callback
devctl |= SBSDIO_DEVCTL_F2WM_ENAB;
brcmf_sdiod_writeb(sdiod, SBSDIO_DEVICE_CTL, devctl,
&err);
+ brcmf_sdiod_writeb(sdiod, SBSDIO_FUNC1_MESBUSYCTRL,
+ CY_4373_F2_WATERMARK |
+ SBSDIO_MESBUSYCTRL_ENAB, &err);
break;
default:
brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK,
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
@@ -77,7 +77,7 @@
#define SBSDIO_GPIO_OUT 0x10006
/* gpio enable */
#define SBSDIO_GPIO_EN 0x10007
-/* rev < 7, watermark for sdio device */
+/* rev < 7, watermark for sdio device TX path */
#define SBSDIO_WATERMARK 0x10008
/* control busy signal generation */
#define SBSDIO_DEVICE_CTL 0x10009
@@ -104,6 +104,13 @@
#define SBSDIO_FUNC1_RFRAMEBCHI 0x1001C
/* MesBusyCtl (rev 11) */
#define SBSDIO_FUNC1_MESBUSYCTRL 0x1001D
+/* Watermark for sdio device RX path */
+#define SBSDIO_MESBUSY_RXFIFO_WM_MASK 0x7F
+#define SBSDIO_MESBUSY_RXFIFO_WM_SHIFT 0
+/* Enable busy capability for MES access */
+#define SBSDIO_MESBUSYCTRL_ENAB 0x80
+#define SBSDIO_MESBUSYCTRL_ENAB_SHIFT 7
+
/* Sdio Core Rev 12 */
#define SBSDIO_FUNC1_WAKEUPCTRL 0x1001E
#define SBSDIO_FUNC1_WCTRL_ALPWAIT_MASK 0x1