OpenWrt – Rev 4

Subversion Repositories:
Rev:
From 4b236a0fe51259ccde06aed046fe20bfe6e25dce Mon Sep 17 00:00:00 2001
From: Corentin Labbe <clabbe.montjoie@gmail.com>
Date: Tue, 31 Oct 2017 09:19:10 +0100
Subject: [PATCH] arm: dts: sunxi: h3/h5: Restore EMAC changes

The original dwmac-sun8i DT bindings have some issue on how to handle
integrated PHY and was reverted in last RC of 4.13.
But now we have a solution so we need to get back that was reverted.

This patch restore sunxi-h3-h5.dtsi
This reverts partially commit fe45174b72ae ("arm: dts: sunxi: Revert EMAC changes")

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 arch/arm/boot/dts/sunxi-h3-h5.dtsi | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -391,6 +391,32 @@
                        clocks = <&osc24M>;
                };
 
+               emac: ethernet@1c30000 {
+                       compatible = "allwinner,sun8i-h3-emac";
+                       syscon = <&syscon>;
+                       reg = <0x01c30000 0x10000>;
+                       interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "macirq";
+                       resets = <&ccu RST_BUS_EMAC>;
+                       reset-names = "stmmaceth";
+                       clocks = <&ccu CLK_BUS_EMAC>;
+                       clock-names = "stmmaceth";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+
+                       mdio: mdio {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               int_mii_phy: ethernet-phy@1 {
+                                       compatible = "ethernet-phy-ieee802.3-c22";
+                                       reg = <1>;
+                                       clocks = <&ccu CLK_BUS_EPHY>;
+                                       resets = <&ccu RST_BUS_EPHY>;
+                               };
+                       };
+               };
+
                spi0: spi@01c68000 {
                        compatible = "allwinner,sun8i-h3-spi";
                        reg = <0x01c68000 0x1000>;