OpenWrt – Rev 4

Subversion Repositories:
Rev:
/dts-v1/;

#include "vr9.dtsi"

#include <dt-bindings/input/input.h>

/ {
        compatible = "alphanetworks,asl56026", "lantiq,xway", "lantiq,vr9";
        model = "BT OpenReach VDSL Modem";

        chosen {
                bootargs = "console=ttyLTQ0,115200";
        };

        aliases {
                led-boot = &power_green;
                led-failsafe = &power_red;
                led-running = &power_green;

                led-dsl = &dsl;
        };

        memory@0 {
                reg = <0x0 0x2000000>;
        };

        fpi@10000000 {
                localbus@0 {
                        nor-boot@0 {
                                compatible = "lantiq,nor";
                                bank-width = <2>;
                                reg = <0 0x0 0x0800000>;
                                #address-cells = <1>;
                                #size-cells = <1>;

                                partitions {
                                        compatible = "fixed-partitions";
                                        #address-cells = <1>;
                                        #size-cells = <1>;

                                        partition@0 {
                                                label = "uboot";
                                                reg = <0x0 0x30000>;
                                        };

                                        partition@30000 {
                                                label = "uboot_env";
                                                reg = <0x30000 0x10000>;
                                        };

                                        partition@40000 {
                                                label = "firmware";
                                                reg = <0x40000 0x750000>;
                                        };

                                        partition@790000 {
                                                label = "ddrconfig";
                                                reg = <0x790000 0x70000>;
                                                read-only;
                                        };
                                };
                        };
                };

                gpio: pinmux@E100B10 {
                        pinctrl-names = "default";
                        pinctrl-0 = <&state_default>;

                        state_default: pinmux {
                                mdio {
                                        lantiq,groups = "mdio";
                                        lantiq,function = "mdio";
                                };
                        };
                };
        };

        gphy-xrx200 {
                compatible = "lantiq,phy-xrx200";
                firmware1 = "lantiq/xrx200_phy22f_a14.bin";     /*VR9 1.1*/
                firmware2 = "lantiq/xrx200_phy22f_a22.bin";     /*VR9 1.2*/
                phys = [ 00 01 ];
        };

        gpio-keys-polled {
                compatible = "gpio-keys-polled";
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <100>;

                reset {
                        label = "reset";
                        gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
                };
        };

        gpio-leds {
                compatible = "gpio-leds";

                dsl: dsl {
                        label = "asl56026:green:dsl";
                        gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
                };

                /* power-* is a bicolour led */
                power_green: power_green {
                        label = "asl56026:green:power";
                        gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
                        default-state = "keep";
                };

                power_red: power_red {
                        label = "asl56026:red:power";
                        gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
                };
        };

        gpio_export {
                compatible = "gpio-export";
                #size-cells = <0>;

                power_led_blink {
                        gpio-export,name = "power_led_blink";
                        gpio-export,output = <0>;
                        gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
                };
        };
};

&eth0 {
        lan: interface@0 {
                compatible = "lantiq,xrx200-pdi";
                #address-cells = <1>;
                #size-cells = <0>;
                reg = <0>;
                lantiq,switch;

                ethernet@2 {
                        compatible = "lantiq,xrx200-pdi-port";
                        reg = <2>;
                        phy-mode = "mii";
                        phy-handle = <&phy11>;
                };

                ethernet@3 {
                        compatible = "lantiq,xrx200-pdi-port";
                        reg = <3>;
                        phy-mode = "mii";
                        phy-handle = <&phy14>;
                };

        };

        mdio@0 {
                #address-cells = <1>;
                #size-cells = <0>;
                compatible = "lantiq,xrx200-mdio";

                phy11: ethernet-phy@11 {
                        reg = <0x11>;
                        compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
                };

                phy14: ethernet-phy@14 {
                        reg = <0x14>;
                        compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
                };

        };
};