OpenWrt – Rev 4

Subversion Repositories:
Rev:
/dts-v1/;

#include "vr9.dtsi"

#include <dt-bindings/input/input.h>

/ {
        compatible = "arcadyan,arv7519rw22", "lantiq,xway", "lantiq,vr9";
        model = "Orange Livebox 2.1";

        chosen {
                bootargs = "console=ttyLTQ0,115200";
        };

        aliases {
                led-boot = &power_green;
                led-failsafe = &power_green;
                led-running = &power_green;

                led-dsl = &internet_green;
        };

        memory@0 {
                reg = <0x0 0x8000000>;
        };

        fpi@10000000 {
                localbus@0 {
                        nor-boot@0 {
                                compatible = "lantiq,nor";
                                bank-width = <2>;
                                reg = <0 0x0 0x2000000>;
                                #address-cells = <1>;
                                #size-cells = <1>;

                                partitions {
                                        compatible = "fixed-partitions";
                                        #address-cells = <1>;
                                        #size-cells = <1>;

                                        partition@0 {
                                                label = "uboot";
                                                reg = <0x0 0x60000>;
                                                read-only;
                                        };

                                        partition@60000 {
                                                label = "uboot-env";
                                                reg = <0x60000 0x20000>;
                                                read-only;
                                        };

                                        partition@80000 {
                                                label = "firmware";
                                                reg = <0x80000 0x1f00000>;
                                        };

                                        boardconfig: partition@1f80000 {
                                                label = "boardconfig";
                                                reg = <0x1f80000 0x80000>;
                                                read-only;
                                        };
                                };
                        };
                };

                gpio: pinmux@E100B10 {
                        pinctrl-names = "default";
                        pinctrl-0 = <&state_default>;

                        state_default: pinmux {
                                mdio {
                                        lantiq,groups = "mdio";
                                        lantiq,function = "mdio";
                                };
                                pcie-rst {
                                        lantiq,pins = "io21";
                                        lantiq,pull = <0>;
                                        lantiq,output = <1>;
                                };
                        };
                };

                ifxhcd@E101000 {
                        status = "okay";
                        gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
                };

                ifxhcd@E106000 {
                        status = "okay";
                        gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
                };

                pcie@d900000 {
                        status = "okay";
                        gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
                };
        };

        gphy-xrx200 {
                compatible = "lantiq,phy-xrx200";
                firmware1 = "lantiq/xrx200_phy22f_a14.bin";     /*VR9 1.1*/
                firmware2 = "lantiq/xrx200_phy22f_a22.bin";     /*VR9 1.2*/
                phys = [ 00 01 ];
        };

        gpio-keys-polled {
                compatible = "gpio-keys-polled";
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <100>;

                reset {
                        label = "reset";
                        gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
                };
                rfkill {
                        label = "rfkill";
                        gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RFKILL>;
                };
                wps {
                        label = "wps";
                        gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_WPS_BUTTON>;
                };
        };

        gpio-leds {
                compatible = "gpio-leds";

                lan_green {
                        label = "arv7519rw22:green:lan";
                        gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
                };
                internet_red {
                        label = "arv7519rw22:red:internet";
                        gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
                };
                power_green: power_green {
                        label = "arv7519rw22:green:power";
                        gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
                        default-state = "keep";
                };
                alarm_blue {
                        label = "arv7519rw22:blue:alarm";
                        gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
                };
                internet_orange {
                        label = "arv7519rw22:orange:internet";
                        gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
                };
                internet_green: internet_green {
                        label = "arv7519rw22:green:internet";
                        gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
                };
                voice_green {
                        label = "arv7519rw22:green:voice";
                        gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
                };
        };
};

&eth0 {
        lan: interface@0 {
                compatible = "lantiq,xrx200-pdi";
                #address-cells = <1>;
                #size-cells = <0>;
                reg = <0>;
                mtd-mac-address = <&boardconfig 0x16>;
                lantiq,switch;

                ethernet@0 {
                        compatible = "lantiq,xrx200-pdi-port";
                        reg = <0>;
                        phy-mode = "rgmii";
                        phy-handle = <&phy0>;
                };
                ethernet@1 {
                        compatible = "lantiq,xrx200-pdi-port";
                        reg = <4>;
                        phy-mode = "mii";
                        phy-handle = <&phy13>;
                };
                ethernet@2 {
                        compatible = "lantiq,xrx200-pdi-port";
                        reg = <5>;
                        phy-mode = "mii";
                        phy-handle = <&phy14>;
                };
                ethernet@3 {
                        compatible = "lantiq,xrx200-pdi-port";
                        reg = <2>;
                        phy-mode = "mii";
                        phy-handle = <&phy11>;
                };
                ethernet@4 {
                        compatible = "lantiq,xrx200-pdi-port";
                        reg = <3>;
                        phy-mode = "mii";
                        phy-handle = <&phy12>;
                };
        };

        mdio@0 {
                #address-cells = <1>;
                #size-cells = <0>;
                compatible = "lantiq,xrx200-mdio";
                phy0: ethernet-phy@0 {
                        reg = <0x0>;
                        compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
                };
                phy11: ethernet-phy@11 {
                        reg = <0x11>;
                        compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
                };
                phy12: ethernet-phy@12 {
                        reg = <0x12>;
                        compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
                };
                phy13: ethernet-phy@13 {
                        reg = <0x13>;
                        compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
                };
                phy14: ethernet-phy@14 {
                        reg = <0x14>;
                        compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
                };
        };
};