OpenWrt – Rev 4

Subversion Repositories:
?pathlinks?
Blame – Last modification – View Log – Download
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk

define Device/Default
        PROFILES := Default
        KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
        KERNEL_INITRAMFS_PREFIX := $$(IMG_PREFIX)-$(1)-initramfs
        KERNEL_PREFIX := $$(IMAGE_PREFIX)
        KERNEL_LOADADDR := 0x80208000
        SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
        IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
        IMAGE/sysupgrade.bin/squashfs :=
endef

define Device/FitImage
        KERNEL_SUFFIX := -fit-uImage.itb
        KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
        KERNEL_NAME := Image
endef

define Device/FitImageLzma
        KERNEL_SUFFIX := -fit-uImage.itb
        KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb
        KERNEL_NAME := Image
endef

define Device/UbiFit
        KERNEL_IN_UBI := 1
        IMAGES := nand-factory.ubi nand-sysupgrade.bin
        IMAGE/nand-factory.ubi := append-ubi
        IMAGE/nand-sysupgrade.bin := sysupgrade-tar | append-metadata
endef

define Device/DniImage
        KERNEL_SUFFIX := -fit-uImage.itb
        KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
        KERNEL_NAME := Image
        NETGEAR_BOARD_ID :=
        NETGEAR_HW_ID :=
        IMAGES := factory.img sysupgrade.bin
        IMAGE/factory.img := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | netgear-dni
        IMAGE/sysupgrade.bin := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
endef
DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID


define Device/8dev_jalapeno
        $(call Device/FitImage)
        $(call Device/UbiFit)
        DEVICE_DTS := qcom-ipq4018-jalapeno
        BLOCKSIZE := 128k
        PAGESIZE := 2048
        DEVICE_TITLE := 8devices Jalapeno
endef
TARGET_DEVICES += 8dev_jalapeno

define Device/asus_rt-ac58u
        $(call Device/FitImageLzma)
        DEVICE_DTS := qcom-ipq4018-rt-ac58u
        BLOCKSIZE := 128k
        PAGESIZE := 2048
        DTB_SIZE := 65536
        DEVICE_TITLE := Asus RT-AC58U
        IMAGE_SIZE := 20439364
        FILESYSTEMS := squashfs
#       Someone - in their infinite wisdom - decided to put the firmware
#       version in front of the image name \03\00\00\04 => Version 3.0.0.4
#       Since u-boot works with strings we either need another fixup step
#       to add a version... or we are very careful not to add '\0' into that
#       string and call it a day.... Yeah, we do the latter!
        UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC58U')
        IMAGES := sysupgrade.bin
        DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += asus_rt-ac58u

define Device/avm_fritzbox-4040
        $(call Device/FitImageLzma)
        DEVICE_DTS := qcom-ipq4018-fritz4040
        BOARD_NAME := fritz4040
        DEVICE_TITLE := AVM Fritz!Box 4040
        IMAGE_SIZE := 29753344
        UBOOT_PATH := $$(BIN_DIR)/u-boot-fritz4040/uboot-fritz4040.bin
        UBOOT_PARTITION_SIZE := 524288
        IMAGES = eva.bin sysupgrade.bin
        IMAGE/eva.bin := append-uboot | pad-to $$$$(UBOOT_PARTITION_SIZE) | append-kernel | append-rootfs | pad-rootfs
        IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
        DEVICE_PACKAGES := fritz-tffs fritz-caldata u-boot-fritz4040
endef
TARGET_DEVICES += avm_fritzbox-4040

define Device/compex_wpj428
        $(call Device/FitImage)
        DEVICE_DTS := qcom-ipq4028-wpj428
        DEVICE_DTS_CONFIG := config@4
        BLOCKSIZE := 64k
        DEVICE_TITLE := Compex WPJ428
        IMAGE_SIZE := 31232k
        KERNEL_SIZE := 4096k
        IMAGES = sysupgrade.bin
        IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
        DEVICE_PACKAGES := kmod-gpio-beeper
endef
TARGET_DEVICES += compex_wpj428

define Device/glinet_gl-b1300
        $(call Device/FitImage)
        DEVICE_TITLE := GL.iNet GL-B1300
        BOARD_NAME := gl-b1300
        DEVICE_DTS := qcom-ipq4029-gl-b1300
        KERNEL_SIZE := 4096k
        IMAGE_SIZE := 26624k
        IMAGES := sysupgrade.bin
        IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata
endef
TARGET_DEVICES += glinet_gl-b1300

define Device/meraki_mr33
        $(call Device/FitImage)
        DEVICE_DTS := qcom-ipq4029-mr33
        BLOCKSIZE := 131072
        PAGESIZE := 2048
        DEVICE_TITLE := Cisco Meraki MR33
        IMAGES = sysupgrade.bin
        DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887
endef
TARGET_DEVICES += meraki_mr33

define Device/netgear_ex61x0v2
        $(call Device/DniImage)
        KERNEL_SIZE := 3080192
        DEVICE_DTS_CONFIG := config@4
        NETGEAR_BOARD_ID := EX6150v2series
        NETGEAR_HW_ID := 29765285+16+0+128+2x2
endef

define Device/netgear_ex6100v2
        $(call Device/netgear_ex61x0v2)
        DEVICE_DTS := qcom-ipq4018-ex6100v2
        DEVICE_TITLE := Netgear EX6100v2
endef
TARGET_DEVICES += netgear_ex6100v2

define Device/netgear_ex6150v2
        $(call Device/netgear_ex61x0v2)
        DEVICE_DTS := qcom-ipq4018-ex6150v2
        DEVICE_TITLE := Netgear EX6150v2
endef
TARGET_DEVICES += netgear_ex6150v2

define Device/openmesh_a42
        $(call Device/FitImageLzma)
        DEVICE_DTS := qcom-ipq4018-a42
        DEVICE_DTS_CONFIG := config@om.a42
        BLOCKSIZE := 64k
        DEVICE_TITLE := OpenMesh A42
        KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
        IMAGE_SIZE := 15616k
        IMAGES = factory.bin sysupgrade.bin
        IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
        IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
        DEVICE_PACKAGES := uboot-envtools
endef
TARGET_DEVICES += openmesh_a42

define Device/openmesh_a62
        $(call Device/FitImageLzma)
        DEVICE_DTS := qcom-ipq4019-a62
        DEVICE_DTS_CONFIG := config@om.a62
        BLOCKSIZE := 64k
        DEVICE_TITLE := OpenMesh A62
        KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
        IMAGE_SIZE := 15552k
        IMAGES = factory.bin sysupgrade.bin
        IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62
        IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
        DEVICE_PACKAGES := ath10k-firmware-qca9888 uboot-envtools
endef

TARGET_DEVICES += openmesh_a62

define Device/qcom_ap-dk01.1-c1
        DEVICE_TITLE := QCA AP-DK01.1-C1
        BOARD_NAME := ap-dk01.1-c1
        DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
        KERNEL_INSTALL := 1
        KERNEL_SIZE := 4096k
        IMAGE_SIZE := 26624k
        $(call Device/FitImage)
        IMAGES := sysupgrade.bin
        IMAGE/sysupgrade.bin := append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata
endef
TARGET_DEVICES += qcom_ap-dk01.1-c1

define Device/qcom_ap-dk04.1-c1
        $(call Device/FitImage)
        $(call Device/UbiFit)
        DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
        KERNEL_INSTALL := 1
        KERNEL_SIZE := 4048k
        BLOCKSIZE := 128k
        PAGESIZE := 2048
        BOARD_NAME := ap-dk04.1-c1
        DEVICE_TITLE := QCA AP-DK04.1-C1
endef
TARGET_DEVICES += qcom_ap-dk04.1-c1

define Device/zyxel_wre6606
        $(call Device/FitImage)
        DEVICE_TITLE := ZyXEL WRE6606
        DEVICE_DTS_CONFIG := config@4
        DEVICE_DTS := qcom-ipq4018-wre6606
        DEVICE_PACKAGES := ipq-wifi-zyxel_wre6606
        IMAGES := sysupgrade.bin
        IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
endef
TARGET_DEVICES += zyxel_wre6606

$(eval $(call BuildImage))