OpenWrt – Rev 4
?pathlinks?
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -155,6 +155,24 @@ static const u8 default_modem_addr[ETH_A
static const u8 buggy_fw_addr[ETH_ALEN] = {0x00, 0xa0, 0xc6, 0x00, 0x00, 0x00};
+#if 1 //Added by Quectel
+#include <linux/etherdevice.h>
+struct sk_buff *qmi_wwan_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
+{
+ if (dev->udev->descriptor.idVendor != cpu_to_le16(0x2C7C))
+ return skb;
+ // Skip Ethernet header from message
+ if (skb_pull(skb, ETH_HLEN)) {
+ return skb;
+ } else {
+ dev_err(&dev->intf->dev, "Packet Dropped ");
+ }
+ // Filter the packet out, release it
+ dev_kfree_skb_any(skb);
+ return NULL;
+}
+#endif
+
/* Make up an ethernet header if the packet doesn't have one.
*
* A firmware bug common among several devices cause them to send raw
@@ -445,6 +463,20 @@ static int qmi_wwan_bind(struct usbnet *
}
dev->net->netdev_ops = &qmi_wwan_netdev_ops;
dev->net->sysfs_groups[0] = &qmi_wwan_sysfs_attr_group;
+#if 1 //Added by Quectel
+ if (dev->udev->descriptor.idVendor == cpu_to_le16(0x2C7C)) {
+ dev_info(&intf->dev, "QuectelEC25&EC21&EG91&EG95&EG06&EP06&EM06&BG96&AG35 work on RawIP mode\n");
+ dev->net->flags |= IFF_NOARP;
+ usb_control_msg(
+ interface_to_usbdev(intf),
+ usb_sndctrlpipe(interface_to_usbdev(intf), 0),
+ 0x22, //USB_CDC_REQ_SET_CONTROL_LINE_STATE
+ 0x21, //USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE
+ 1, //active CDC DTR
+ intf->cur_altsetting->desc.bInterfaceNumber,
+ NULL, 0, 100);
+ }
+#endif
err:
return status;
}
@@ -535,7 +567,10 @@ static const struct driver_info qmi_wwan
.bind = qmi_wwan_bind,
.unbind = qmi_wwan_unbind,
.manage_power = qmi_wwan_manage_power,
- .rx_fixup = qmi_wwan_rx_fixup,
+ #if 1 //Added by Quectel
+ .tx_fixup = qmi_wwan_tx_fixup,
+ .rx_fixup = qmi_wwan_rx_fixup,
+ #endif
};
static const struct driver_info qmi_wwan_info_quirk_dtr = {
@@ -569,6 +604,17 @@ static const struct driver_info qmi_wwan
QMI_FIXED_INTF(vend, prod, 0)
static const struct usb_device_id products[] = {
+#if 1 //Added by Quectel
+ { QMI_FIXED_INTF(0x05C6, 0x9003, 4) }, /* Quectel UC20 */
+ { QMI_FIXED_INTF(0x2C7C, 0x0125, 4) }, /* Quectel EC25 */
+ { QMI_FIXED_INTF(0x2C7C, 0x0121, 4) }, /* Quectel EC21 */
+ { QMI_FIXED_INTF(0x05C6, 0x9215, 4) }, /* Quectel EC20 */
+ { QMI_FIXED_INTF(0x2C7C, 0x0191, 4) }, /* Quectel EG91 */
+ { QMI_FIXED_INTF(0x2C7C, 0x0195, 4) }, /* Quectel EG95 */
+ { QMI_FIXED_INTF(0x2C7C, 0x0306, 4) }, /* Quectel EG06/EP06/EM06 */
+ { QMI_FIXED_INTF(0x2C7C, 0x0296, 4) }, /* Quectel BG96 */
+ { QMI_FIXED_INTF(0x2C7C, 0x0435, 4) }, /* Quectel AG35 */
+#endif
/* 1. CDC ECM like devices match on the control interface */
{ /* Huawei E392, E398 and possibly others sharing both device id and more... */
USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 9),
@@ -985,7 +1031,6 @@ static const struct usb_device_id produc
{QMI_GOBI_DEVICE(0x05c6, 0x9225)}, /* Sony Gobi 2000 Modem device (N0279, VU730) */
{QMI_GOBI_DEVICE(0x05c6, 0x9245)}, /* Samsung Gobi 2000 Modem device (VL176) */
{QMI_GOBI_DEVICE(0x03f0, 0x251d)}, /* HP Gobi 2000 Modem device (VP412) */
- {QMI_GOBI_DEVICE(0x05c6, 0x9215)}, /* Acer Gobi 2000 Modem device (VP413) */
{QMI_FIXED_INTF(0x05c6, 0x9215, 4)}, /* Quectel EC20 Mini PCIe */
{QMI_GOBI_DEVICE(0x05c6, 0x9265)}, /* Asus Gobi 2000 Modem device (VR305) */
{QMI_GOBI_DEVICE(0x05c6, 0x9235)}, /* Top Global Gobi 2000 Modem device (VR306) */
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -553,6 +553,22 @@ static void option_instat_callback(struc
#define WETELECOM_PRODUCT_6802 0x6802
#define WETELECOM_PRODUCT_WMD300 0x6803
+#define LONGSUNG_PRODUCT_U9300C 0x9b3c
+
+/* FORGE PRODUCT */
+#define FORGE_VENDOR_ID 0x05c6
+
+#define FORGE_PRODUCT_SLM750 0xf601
+
+/* NODECOM PRODUCT */
+#define NODECOM_VENDOR_ID 0x1508
+
+#define NODECOM_PRODUCT_NL660 0x1001
+
+/* NEOWAY PRODUCT */
+#define NEOWAY_VENDOR_ID 0x2949
+
+#define NEOWAY_PRODUCT_N720 0x8243
/* Device flags */
@@ -564,6 +580,24 @@ static void option_instat_callback(struc
static const struct usb_device_id option_ids[] = {
+#if 1 //Added by Quectel
+ { USB_DEVICE(0x05C6, 0x9090) }, /* Quectel UC15 */
+ { USB_DEVICE(0x05C6, 0x9003) }, /* Quectel UC20 */
+ { USB_DEVICE(0x2C7C, 0x0125) }, /* Quectel EC25 */
+ { USB_DEVICE(0x2C7C, 0x0121) }, /* Quectel EC21 */
+ { USB_DEVICE(0x05C6, 0x9215) }, /* Quectel EC20 */
+ { USB_DEVICE(0x2C7C, 0x0191) }, /* Quectel EG91 */
+ { USB_DEVICE(0x2C7C, 0x0195) }, /* Quectel EG95 */
+ { USB_DEVICE(0x2C7C, 0x0306) }, /* Quectel EG06/EP06/EM06 */
+ { USB_DEVICE(0x2C7C, 0x0296) }, /* Quectel BG96 */
+ { USB_DEVICE(0x2C7C, 0x0435) }, /* Quectel AG35 */
+#endif
+ { USB_DEVICE(0x19d2, 0x0536) },/* MZ386 */
+ { USB_DEVICE(LONGCHEER_VENDOR_ID, LONGSUNG_PRODUCT_U9300C) },
+ { USB_DEVICE(FORGE_VENDOR_ID, FORGE_PRODUCT_SLM750) },
+ { USB_DEVICE(NODECOM_VENDOR_ID, NODECOM_PRODUCT_NL660) },
+ { USB_DEVICE(NEOWAY_VENDOR_ID, NEOWAY_PRODUCT_N720) },
+
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_LIGHT) },
@@ -1972,6 +2006,9 @@ static struct usb_serial_driver option_1
#ifdef CONFIG_PM
.suspend = usb_wwan_suspend,
.resume = usb_wwan_resume,
+#if 1 //Added by Quectel
+ .reset_resume = usb_wwan_resume,
+#endif
#endif
};
@@ -2005,12 +2042,67 @@ static int option_probe(struct usb_seria
* a separate module.
*/
if (dev_desc->idVendor == cpu_to_le16(SAMSUNG_VENDOR_ID) &&
- dev_desc->idProduct == cpu_to_le16(SAMSUNG_PRODUCT_GT_B3730) &&
- iface_desc->bInterfaceClass != USB_CLASS_CDC_DATA)
+ dev_desc->idProduct == cpu_to_le16(SAMSUNG_PRODUCT_GT_B3730) &&
+ iface_desc->bInterfaceClass != USB_CLASS_CDC_DATA)
return -ENODEV;
- /* Store the device flags so we can use them during attach. */
- usb_set_serial_data(serial, (void *)device_flags);
+#if 1 //Added by Quectel
+ //Quectel UC20's interface 4 can be used as USB network device
+ if (serial->dev->descriptor.idVendor == cpu_to_le16(0x05C6) && \
+ serial->dev->descriptor.idProduct == cpu_to_le16(0x9003) \
+ && serial->interface->cur_altsetting->desc.bInterfaceNumber >= 4)
+ return -ENODEV;
+ //Quectel EC20's interface 4 can be used as USB network device
+ if (serial->dev->descriptor.idVendor == cpu_to_le16(0x05C6) && \
+ serial->dev->descriptor.idProduct == cpu_to_le16(0x9215) \
+ && serial->interface->cur_altsetting->desc.bInterfaceNumber >= 4)
+ return -ENODEV;
+ //Quectel EC25&EC21&EG91&EG95&EG06&EP06&EM06&BG96/AG35's interface 4 can be used as USB network device
+ if (serial->dev->descriptor.idVendor == cpu_to_le16(0x2C7C) \
+ && serial->interface->cur_altsetting->desc.bInterfaceNumber >= 4)
+ return -ENODEV;
+#endif
+#if 1 //Added by Quectel
+ //For USB Auto Suspend
+ if (serial->dev->descriptor.idVendor == cpu_to_le16(0x05C6) &&
+ serial->dev->descriptor.idProduct == cpu_to_le16(0x9090)) {
+ pm_runtime_set_autosuspend_delay(&serial->dev->dev, 3000);
+ usb_enable_autosuspend(serial->dev);
+ }
+ if (serial->dev->descriptor.idVendor == cpu_to_le16(0x05C6) &&
+ serial->dev->descriptor.idProduct == cpu_to_le16(0x9003)) {
+ pm_runtime_set_autosuspend_delay(&serial->dev->dev, 3000);
+ usb_enable_autosuspend(serial->dev);
+ }
+ if (serial->dev->descriptor.idVendor == cpu_to_le16(0x05C6) &&
+ serial->dev->descriptor.idProduct == cpu_to_le16(0x9215)) {
+ pm_runtime_set_autosuspend_delay(&serial->dev->dev, 3000);
+ usb_set_serial_data(serial, (void *)device_flags);
+ usb_enable_autosuspend(serial->dev);
+ }
+ if (serial->dev->descriptor.idVendor == cpu_to_le16(0x2C7C)) {
+ pm_runtime_set_autosuspend_delay(&serial->dev->dev, 3000);
+ usb_enable_autosuspend(serial->dev);
+ }
+#endif
+#if 1 //Added by Quectel
+ //For USB Remote Wakeup
+ if (serial->dev->descriptor.idVendor == cpu_to_le16(0x05C6) &&
+ serial->dev->descriptor.idProduct == cpu_to_le16(0x9090)) {
+ device_init_wakeup(&serial->dev->dev, 1); //usb remote wakeup
+ }
+ if (serial->dev->descriptor.idVendor == cpu_to_le16(0x05C6) &&
+ serial->dev->descriptor.idProduct == cpu_to_le16(0x9003)) {
+ device_init_wakeup(&serial->dev->dev, 1); //usb remote wakeup
+ }
+ if (serial->dev->descriptor.idVendor == cpu_to_le16(0x05C6) &&
+ serial->dev->descriptor.idProduct == cpu_to_le16(0x9215)) {
+ device_init_wakeup(&serial->dev->dev, 1); //usb remote wakeup
+ }
+ if (serial->dev->descriptor.idVendor == cpu_to_le16(0x2C7C)) {
+ device_init_wakeup(&serial->dev->dev, 1); //usb remote wakeup
+ }
+#endif
return 0;
}
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -92,7 +92,6 @@ static const struct usb_device_id id_tab
{USB_DEVICE(0x03f0, 0x241d)}, /* HP Gobi 2000 QDL device (VP412) */
{USB_DEVICE(0x03f0, 0x251d)}, /* HP Gobi 2000 Modem device (VP412) */
{USB_DEVICE(0x05c6, 0x9214)}, /* Acer Gobi 2000 QDL device (VP413) */
- {USB_DEVICE(0x05c6, 0x9215)}, /* Acer Gobi 2000 Modem device (VP413) */
{USB_DEVICE(0x05c6, 0x9264)}, /* Asus Gobi 2000 QDL device (VR305) */
{USB_DEVICE(0x05c6, 0x9265)}, /* Asus Gobi 2000 Modem device (VR305) */
{USB_DEVICE(0x05c6, 0x9234)}, /* Top Global Gobi 2000 QDL device (VR306) */
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -504,6 +504,19 @@ static struct urb *usb_wwan_setup_urb(st
usb_fill_bulk_urb(urb, serial->dev,
usb_sndbulkpipe(serial->dev, endpoint) | dir,
buf, len, callback, ctx);
+#if 1 //Added by Quectel for zero packet
+ if (dir == USB_DIR_OUT) {
+ struct usb_device_descriptor *desc = &serial->dev->descriptor;
+ if (desc->idVendor == cpu_to_le16(0x05C6) && desc->idProduct == cpu_to_le16(0x9090))
+ urb->transfer_flags |= URB_ZERO_PACKET;
+ if (desc->idVendor == cpu_to_le16(0x05C6) && desc->idProduct == cpu_to_le16(0x9003))
+ urb->transfer_flags |= URB_ZERO_PACKET;
+ if (desc->idVendor == cpu_to_le16(0x05C6) && desc->idProduct == cpu_to_le16(0x9215))
+ urb->transfer_flags |= URB_ZERO_PACKET;
+ if (desc->idVendor == cpu_to_le16(0x2C7C))
+ urb->transfer_flags |= URB_ZERO_PACKET;
+ }
+#endif
return urb;
}