OpenWrt – Rev 4
?pathlinks?
/*
* NETGEAR WNR2200 board support
*
* Copyright (C) 2013 Aidan Kissane <aidankissane at googlemail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/kernel.h> /* for max() macro */
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h> /* needed to disable switch LEDs */
#include "common.h" /* needed to disable switch LEDs */
#include "dev-ap9x-pci.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-usb.h"
#include "machtypes.h"
/* WNR2200 - connected through AR7241 */
#define WNR2200_GPIO_LED_LAN2_AMBER 0
#define WNR2200_GPIO_LED_LAN4_AMBER 1
#define WNR2200_GPIO_LED_LAN1_AMBER 6 /* AR724X_GPIO_FUNC_JTAG_DISABLE */
#define WNR2200_GPIO_LED_WPS_GREEN 7 /* AR724X_GPIO_FUNC_JTAG_DISABLE */
#define WNR2200_GPIO_LED_USB_GREEN 8 /* AR724X_GPIO_FUNC_JTAG_DISABLE */
#define WNR2200_GPIO_LED_LAN3_AMBER 11
#define WNR2200_GPIO_LED_WAN_AMBER 12
#define WNR2200_GPIO_LED_LAN1_GREEN 13 /* AR724X_..._ETH_SWITCH_LED0 */
#define WNR2200_GPIO_LED_LAN2_GREEN 14 /* AR724X_..._ETH_SWITCH_LED1 */
#define WNR2200_GPIO_LED_LAN3_GREEN 15 /* AR724X_..._ETH_SWITCH_LED2 */
#define WNR2200_GPIO_LED_LAN4_GREEN 16 /* AR724X_..._ETH_SWITCH_LED3 */
#define WNR2200_GPIO_LED_WAN_GREEN 17 /* AR724X_..._ETH_SWITCH_LED4 */
/* WNR2200 - connected through AR9287 */
#define WNR2200_GPIO_WMAC_LED_WLAN_BLUE 0
#define WNR2200_GPIO_WMAC_LED_TEST_AMBER 1
#define WNR2200_GPIO_WMAC_LED_POWER_GREEN 2
#define WNR2200_GPIO_WMAC_BTN_RFKILL 3
#define WNR2200_GPIO_WMAC_USB_5V 4
#define WNR2200_GPIO_WMAC_BTN_WPS 5
#define WNR2200_GPIO_WMAC_BTN_RESET 6
#define WNR2200_KEYS_POLL_INTERVAL 20 /* msecs */
#define WNR2200_KEYS_DEBOUNCE_INTERVAL (3 * WNR2200_KEYS_POLL_INTERVAL)
#define WNR2200_MAC0_OFFSET 0
#define WNR2200_MAC1_OFFSET 6
#define WNR2200_PCIE_CALDATA_OFFSET 0x1000
#define WNR2200_WMAC_OFFSET 0x108c /* wireless MAC is inside ART */
static struct gpio_led wnr2200_leds_gpio[] __initdata = {
{
.name = "netgear:amber:lan1",
.gpio = WNR2200_GPIO_LED_LAN1_AMBER,
.active_low = 1,
}, {
.name = "netgear:amber:lan2",
.gpio = WNR2200_GPIO_LED_LAN2_AMBER,
.active_low = 1,
}, {
.name = "netgear:amber:lan3",
.gpio = WNR2200_GPIO_LED_LAN3_AMBER,
.active_low = 1,
}, {
.name = "netgear:amber:lan4",
.gpio = WNR2200_GPIO_LED_LAN4_AMBER,
.active_low = 1,
}, {
.name = "netgear:amber:wan",
.gpio = WNR2200_GPIO_LED_WAN_AMBER,
.active_low = 1,
}, {
.name = "netgear:green:lan1",
.gpio = WNR2200_GPIO_LED_LAN1_GREEN,
.active_low = 1,
}, {
.name = "netgear:green:lan2",
.gpio = WNR2200_GPIO_LED_LAN2_GREEN,
.active_low = 1,
}, {
.name = "netgear:green:lan3",
.gpio = WNR2200_GPIO_LED_LAN3_GREEN,
.active_low = 1,
}, {
.name = "netgear:green:lan4",
.gpio = WNR2200_GPIO_LED_LAN4_GREEN,
.active_low = 1,
}, {
.name = "netgear:green:usb",
.gpio = WNR2200_GPIO_LED_USB_GREEN,
.active_low = 1,
}, {
.name = "netgear:green:wan",
.gpio = WNR2200_GPIO_LED_WAN_GREEN,
.active_low = 1,
}, {
.name = "netgear:green:wps",
.gpio = WNR2200_GPIO_LED_WPS_GREEN,
.active_low = 1,
}
};
static struct gpio_led wnr2200_wmac_leds_gpio[] = {
{
.name = "netgear:amber:test",
.gpio = WNR2200_GPIO_WMAC_LED_TEST_AMBER,
.active_low = 1,
}, {
.name = "netgear:green:power",
.gpio = WNR2200_GPIO_WMAC_LED_POWER_GREEN,
.active_low = 1,
.default_state = LEDS_GPIO_DEFSTATE_ON,
}, {
.name = "netgear:blue:wlan",
.gpio = WNR2200_GPIO_WMAC_LED_WLAN_BLUE,
.active_low = 1,
}
};
static struct gpio_keys_button wnr2200_wmac_keys_gpio[] = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = WNR2200_KEYS_DEBOUNCE_INTERVAL,
.gpio = WNR2200_GPIO_WMAC_BTN_RESET,
.active_low = 1,
}, {
.desc = "rfkill",
.type = EV_KEY,
.code = KEY_RFKILL,
.debounce_interval = WNR2200_KEYS_DEBOUNCE_INTERVAL,
.gpio = WNR2200_GPIO_WMAC_BTN_RFKILL,
.active_low = 1,
}, {
.desc = "wps",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.debounce_interval = WNR2200_KEYS_DEBOUNCE_INTERVAL,
.gpio = WNR2200_GPIO_WMAC_BTN_WPS,
.active_low = 1,
}
};
/*
* For WNR2200 ART flash area used for WLAN MAC is usually empty (0xff)
* so ath9k driver uses random MAC instead each time module is loaded.
* OpenWrt's original fix was to copy eth1 address to WLAN interface.
* New solution does not duplicate hardware addresses and is taken from
* WNR2000v3 code. It assigns permanent WLAN MAC equal to ethN's MAC
* plus 1, so network interfaces get sequential addresses.
* If ART wireless MAC address field has been filled by user, use it.
*/
static void __init wnr2200_get_wmac(u8 *wmac_gen_addr, int mac0_art_offset,
int mac1_art_offset, int wmac_art_offset)
{
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
u8 *eth0_mac_addr = (u8 *) (art + mac0_art_offset);
u8 *eth1_mac_addr = (u8 *) (art + mac1_art_offset);
u8 *wlan_mac_addr = (u8 *) (art + wmac_art_offset);
/* only 0xff if all bits are set - address is invalid, empty area */
if ((wlan_mac_addr[0] & wlan_mac_addr[1] & wlan_mac_addr[2] &
wlan_mac_addr[3] & wlan_mac_addr[4] & wlan_mac_addr[5]) == 0xff) {
memcpy(wmac_gen_addr, eth0_mac_addr, 5);
wmac_gen_addr[5] = max(eth0_mac_addr[5], eth1_mac_addr[5]) + 1;
/* Avoid potential conflict in case max(0xff,0x00)+1==0x00 */
if (!wmac_gen_addr[5])
wmac_gen_addr[5] = 1;
} else
memcpy(wmac_gen_addr, wlan_mac_addr, 6);
}
static void __init wnr2200_setup(void)
{
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
u8 wlan_mac_addr[6];
/*
* Disable JTAG to use all AR724X GPIO LEDs. Disable CLKs.
* Allow OS to control all link LEDs.
*/
ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE |
AR724X_GPIO_FUNC_UART_EN,
AR724X_GPIO_FUNC_CLK_OBS1_EN |
AR724X_GPIO_FUNC_CLK_OBS2_EN |
AR724X_GPIO_FUNC_CLK_OBS3_EN |
AR724X_GPIO_FUNC_CLK_OBS4_EN |
AR724X_GPIO_FUNC_CLK_OBS5_EN |
AR724X_GPIO_FUNC_GE0_MII_CLK_EN |
AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
ath79_register_mdio(0, 0x0);
ath79_init_mac(ath79_eth0_data.mac_addr, art + WNR2200_MAC0_OFFSET, 0);
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ath79_eth0_data.speed = SPEED_100;
ath79_eth0_data.duplex = DUPLEX_FULL;
ath79_init_mac(ath79_eth1_data.mac_addr, art + WNR2200_MAC1_OFFSET, 0);
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ath79_eth1_data.phy_mask = 0x10;
ath79_register_eth(0);
ath79_register_eth(1);
ath79_register_m25p80(NULL);
wnr2200_get_wmac(wlan_mac_addr, WNR2200_MAC0_OFFSET,
WNR2200_MAC1_OFFSET, WNR2200_WMAC_OFFSET);
ap91_pci_init(art + WNR2200_PCIE_CALDATA_OFFSET, wlan_mac_addr);
ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr2200_leds_gpio),
wnr2200_leds_gpio);
ap9x_pci_setup_wmac_leds(0, wnr2200_wmac_leds_gpio,
ARRAY_SIZE(wnr2200_wmac_leds_gpio));
/* All 3 buttons are connected to wireless chip */
ap9x_pci_setup_wmac_btns(0, wnr2200_wmac_keys_gpio,
ARRAY_SIZE(wnr2200_wmac_keys_gpio),
WNR2200_KEYS_POLL_INTERVAL);
/* enable power for the USB port */
ap9x_pci_setup_wmac_gpio(0, BIT(WNR2200_GPIO_WMAC_USB_5V),
BIT(WNR2200_GPIO_WMAC_USB_5V));
ath79_register_usb();
}
MIPS_MACHINE(ATH79_MACH_WNR2200, "WNR2200", "NETGEAR WNR2200", wnr2200_setup);