OpenWrt – Rev 4

Subversion Repositories:
Rev:
/*
 *  Cisco Meraki MR12 board support
 *
 *  Copyright (C) 2014-2015 Chris Blake <chrisrblake93@gmail.com>
 *
 *  Based on Atheros AP96 board support configuration
 *
 *  Copyright (C) 2009 Marco Porsch
 *  Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
 *  Copyright (C) 2010 Atheros Communications
 *
 *  This program is free software; you can redistribute it and/or modify it
 *  under the terms of the GNU General Public License version 2 as published
 *  by the Free Software Foundation.
 */

#include <linux/platform_device.h>
#include <linux/delay.h>

#include <asm/mach-ath79/ath79.h>

#include "dev-ap9x-pci.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "machtypes.h"

#define MR12_GPIO_LED_W4_GREEN          14
#define MR12_GPIO_LED_W3_GREEN          13
#define MR12_GPIO_LED_W2_GREEN          12
#define MR12_GPIO_LED_W1_GREEN          11

#define MR12_GPIO_LED_WAN               15

#define MR12_GPIO_LED_POWER_ORANGE              16
#define MR12_GPIO_LED_POWER_GREEN               17

#define MR12_GPIO_BTN_RESET             8
#define MR12_KEYS_POLL_INTERVAL         20      /* msecs */
#define MR12_KEYS_DEBOUNCE_INTERVAL     (3 * MR12_KEYS_POLL_INTERVAL)

#define MR12_WAN_PHYMASK    BIT(4)

#define MR12_CALDATA0_OFFSET            0x21000

static struct gpio_led MR12_leds_gpio[] __initdata = {
        {
                .name           = "mr12:green:wan",
                .gpio           = MR12_GPIO_LED_WAN,
                .active_low     = 1,
        }, {
                .name           = "mr12:orange:power",
                .gpio           = MR12_GPIO_LED_POWER_ORANGE,
                .active_low     = 1,
        }, {
                .name           = "mr12:green:power",
                .gpio           = MR12_GPIO_LED_POWER_GREEN,
                .active_low     = 1,
        }, {
                .name           = "mr12:green:wifi4",
                .gpio           = MR12_GPIO_LED_W4_GREEN,
                .active_low     = 1,
        }, {
                .name           = "mr12:green:wifi3",
                .gpio           = MR12_GPIO_LED_W3_GREEN,
                .active_low     = 1,
        }, {
                .name           = "mr12:green:wifi2",
                .gpio           = MR12_GPIO_LED_W2_GREEN,
                .active_low     = 1,
        }, {
                .name           = "mr12:green:wifi1",
                .gpio           = MR12_GPIO_LED_W1_GREEN,
                .active_low     = 1,
        }
};

static struct gpio_keys_button MR12_gpio_keys[] __initdata = {
        {
                .desc           = "reset",
                .type           = EV_KEY,
                .code           = KEY_RESTART,
                .debounce_interval = MR12_KEYS_DEBOUNCE_INTERVAL,
                .gpio           = MR12_GPIO_BTN_RESET,
                .active_low     = 1,
        }
};

static void __init MR12_setup(void)
{
        u8 *mac = (u8 *) KSEG1ADDR(0xbffd0000);
        u8 wlan_mac[ETH_ALEN];

        ath79_register_mdio(0,0x0);

        ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
        ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
        ath79_eth0_data.phy_mask = MR12_WAN_PHYMASK;
        ath79_register_eth(0);

        ath79_register_m25p80(NULL);

        ath79_register_leds_gpio(-1, ARRAY_SIZE(MR12_leds_gpio),
                                        MR12_leds_gpio);
        ath79_register_gpio_keys_polled(-1, MR12_KEYS_POLL_INTERVAL,
                                        ARRAY_SIZE(MR12_gpio_keys),
                                        MR12_gpio_keys);

        ath79_init_mac(wlan_mac, mac, 1);
        ap91_pci_init(mac + MR12_CALDATA0_OFFSET, wlan_mac);
}

MIPS_MACHINE(ATH79_MACH_MR12, "MR12", "Meraki MR12", MR12_setup);