OpenWrt – Rev 2

Subversion Repositories:
Rev:
/dts-v1/;

#include "mt7621.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
        compatible = "iodata,wn-gx300gr", "mediatek,mt7621-soc";
        model = "I-O DATA WN-GX300GR";

        aliases {
                led-boot = &led_power;
                led-failsafe = &led_power;
                led-running = &led_power;
                led-upgrade = &led_power;
        };

        memory@0 {
                device_type = "memory";
                reg = <0x0 0x4000000>;
        };

        chosen {
                bootargs = "console=ttyS0,115200";
        };

        leds {
                compatible = "gpio-leds";

                led_power: power {
                        label = "wn-gx300gr:green:power";
                        gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
                };

                wps {
                        label = "wn-gx300gr:green:wps";
                        gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
                };
        };

        keys {
                compatible = "gpio-keys-polled";
                poll-interval = <20>;

                reset {
                        label = "reset";
                        gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
                };

                wps {
                        label = "wps";
                        gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_WPS_BUTTON>;
                };

                auto {
                        label = "auto";
                        gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
                        linux,code = <BTN_0>;
                        linux,input-type = <EV_SW>;
                };

                custom {
                        label = "custom";
                        gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
                        linux,code = <BTN_0>;
                        linux,input-type = <EV_SW>;
                };
        };
};

&spi0 {
        status = "okay";

        m25p80@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;

                partitions {
                        compatible = "fixed-partitions";
                        #address-cells = <1>;
                        #size-cells = <1>;

                        partition@0 {
                                label = "Bootloader";
                                reg = <0x0 0x30000>;
                                read-only;
                        };

                        partition@30000 {
                                label = "Config";
                                reg = <0x30000 0x10000>;
                                read-only;
                        };

                        Factory: partition@40000 {
                                label = "Factory";
                                reg = <0x40000 0x10000>;
                                read-only;
                        };

                        partition@50000 {
                                label = "iNIC_rf";
                                reg = <0x50000 0x10000>;
                                read-only;
                        };

                        partition@60000 {
                                compatible = "denx,uimage";
                                label = "firmware";
                                reg = <0x60000 0x770000>;
                        };

                        partition@7d0000 {
                                label = "Key";
                                reg = <0x7d0000 0x10000>;
                                read-only;
                        };

                        partition@7e0000 {
                                label = "backup";
                                reg = <0x7e0000 0x10000>;
                                read-only;
                        };

                        partition@7f0000 {
                                label = "storage";
                                reg = <0x7f0000 0x10000>;
                                read-only;
                        };
                };
        };
};

&ethernet {
        mtd-mac-address = <&Factory 0x4>;
};

&pinctrl {
        state_default: pinctrl0 {
                gpio {
                        ralink,group = "uart2", "uart3", "jtag";
                        ralink,function = "gpio";
                };
        };
};

&pcie {
        status = "okay";
};

&pcie0 {
        mt76@0,0 {
                reg = <0x0000 0 0 0 0>;
                mediatek,mtd-eeprom = <&Factory 0x0>;
        };
};

&xhci {
        status = "disabled";
};