OpenWrt – Rev 3

?pathlinks?

Rev 2 – Blame – Compare with Previous – Last modification – View Log – Download

#include "rt5350.dtsi"

/ {
        compatible = "olimex,rt5350f-olinuxino", "ralink,rt5350-soc";

    aliases {
        serial0 = &uartlite;
        serial1 = &uart;
    };
};


&spi0 {
        status = "okay";

        m25p80@0 {
                #address-cells = <1>;
                #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;

                partition@0 {
                        label = "u-boot";
                        reg = <0x0 0x30000>;
                        read-only;
                };

                partition@30000 {
                        label = "u-boot-env";
                        reg = <0x30000 0x10000>;
                        read-only;
                };

                factory: partition@40000 {
                        label = "factory";
                        reg = <0x40000 0x10000>;
                        read-only;
                };

                partition@50000 {
                        label = "firmware";
                        reg = <0x50000 0x7b0000>;
                };
        };
};

&gpio1 {
        status = "okay";
};

&pinctrl {
        state_default: pinctrl0 {
                gpio {
                        ralink,group = "jtag", "rgmii", "mdio";
                        ralink,function = "gpio";
                };
                uartf_gpio {
                        ralink,group = "uartf";
                        ralink,function = "gpio uartf";
                };
        };
};

&ethernet {
        mtd-mac-address = <&factory 0x4>;
};

&esw {
        mediatek,portmap = <0x2f>;
        mediatek,led_polarity = <0x17>;
};

&wmac {
        ralink,mtd-eeprom = <&factory 0>;
        ralink,led-polarity = <1>;
};

&ehci {
        status = "okay";
};

&ohci {
        status = "okay";
};

&i2c {
        status = "okay";
};

&uart {
        status = "okay";
};