OpenWrt – Rev 3

Subversion Repositories:
Rev:
#include "mt7620a.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
        compatible = "phicomm,psg1218", "ralink,mt7620a-soc";

        gpio-keys-polled {
                compatible = "gpio-keys-polled";
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;

                reset {
                        label = "reset";
                        gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
                };
        };
};

&gpio0 {
        status = "okay";
};

&spi0 {
        status = "okay";

        m25p80@0 {
                #address-cells = <1>;
                #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;

                partition@0 {
                        label = "u-boot";
                        reg = <0x0 0x30000>;
                        read-only;
                };

                partition@20000 {
                        label = "u-boot-env";
                        reg = <0x30000 0x10000>;
                        read-only;
                };

                factory: partition@30000 {
                        label = "factory";
                        reg = <0x40000 0x10000>;
                        read-only;
                };

                partition@40000 {
                        label = "firmware";
                        reg = <0x50000 0x7b0000>;
                };
        };
};

&pcie {
        status = "okay";

        pcie-bridge {
                mt76@0,0 {
                        reg = <0x0000 0 0 0 0>;
                        device_type = "pci";
                        mediatek,mtd-eeprom = <&factory 0x8000>;
                        ieee80211-freq-limit = <5000000 6000000>;
                };
        };
};

&wmac {
        ralink,mtd-eeprom = <&factory 0>;
};