OpenWrt – Rev 3

?pathlinks?

Rev 2 – Blame – Compare with Previous – Last modification – View Log – Download

/dts-v1/;

#include "mt7621.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
        compatible = "d-team,newifi-d2", "mediatek,mt7621-soc";
        model = "Newifi-D2";

        memory@0 {
                device_type = "memory";
                reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
        };

        chosen {
                bootargs = "console=ttyS0,115200";
        };

        gpio-leds {
                compatible = "gpio-leds";

                power-amber {
                        label = "newifi-d2:amber:power";
                        gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
                };

                power-blue {
                        label = "newifi-d2:blue:power";
                        gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
                };

                internet-amber {
                        label = "newifi-d2:amber:internet";
                        gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
                };

                internet-blue {
                        label = "newifi-d2:blue:internet";
                        gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
                };

                wlan2g {
                        label = "newifi-d2:blue:wlan2g";
                        gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
                };

                wlan5g {
                        label = "newifi-d2:blue:wlan5g";
                        gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
                };

                usb {
                        label = "newifi-d2:blue:usb";
                        gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
                };
        };

        gpio-keys-polled {
                compatible = "gpio-keys-polled";
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;

                reset {
                        label = "reset";
                        gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
                };

                wps {
                        label = "wps";
                        gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_WPS_BUTTON>;
                };
        };

        gpio_export {
                compatible = "gpio-export";
                #size-cells = <0>;

                power_usb3 {
                        gpio-export,name = "power_usb3";
                        gpio-export,output = <1>;
                        gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
                };
        };
};

&spi0 {
        status = "okay";

        m25p80@0 {
                #address-cells = <1>;
                #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;
                m25p,chunked-io = <32>;

                partition@0 {
                        label = "u-boot";
                        reg = <0x0 0x30000>;
                        read-only;
                };

                partition@30000 {
                        label = "u-boot-env";
                        reg = <0x30000 0x10000>;
                        read-only;
                };

                factory: partition@40000 {
                        label = "factory";
                        reg = <0x40000 0x10000>;
                        read-only;
                };

                partition@50000 {
                        label = "firmware";
                        reg = <0x50000 0x1fb0000>;
                };
        };
};

&pcie {
        status = "okay";

        pcie0 {
                mt76@0,0 {
                        reg = <0x0000 0 0 0 0>;
                        device_type = "pci";
                        mediatek,mtd-eeprom = <&factory 0x8000>;
                        ieee80211-freq-limit = <5000000 6000000>;
                };
        };

        pcie1 {
                mt76@1,0 {
                        reg = <0x0000 0 0 0 0>;
                        device_type = "pci";
                        mediatek,mtd-eeprom = <&factory 0x0000>;
                };
        };
};

&ethernet {
        mtd-mac-address = <&factory 0xe000>;
};

&pinctrl {
        state_default: pinctrl0 {
                gpio {
                        ralink,group = "i2c", "jtag", "uart2", "uart3";
                        ralink,function = "gpio";
                };
        };
};