OpenWrt – Rev 3

?pathlinks?

Rev 2 – Blame – Compare with Previous – Last modification – View Log – Download

/dts-v1/;

#include "rt3050.dtsi"

#include <dt-bindings/gpio/gpio.h>

/ {
        compatible = "planex,mzk-wdpr", "ralink,rt3052-soc";
        model = "Planex MZK-WDPR";

        chosen {
                bootargs = "console=ttyS0,115200";
        };

        cfi@1f000000 {
                compatible = "cfi-flash";
                reg = <0x1f000000 0x800000>;

                bank-width = <2>;
                device-width = <2>;
                #address-cells = <1>;
                #size-cells = <1>;

                partition@0 {
                        label = "u-boot";
                        reg = <0x0 0x30000>;
                        read-only;
                };

                partition@30000 {
                        label = "u-boot-env";
                        reg = <0x30000 0x10000>;
                        read-only;
                };

                factory: partition@40000 {
                        label = "factory";
                        reg = <0x40000 0x10000>;
                        read-only;
                };

                partition@7f0000 {
                        label = "Data3G";
                        reg = <0x7f0000 0x10000>;
                        read-only;
                };

                partition@50000 {
                        label = "firmware";
                        reg = <0x50000 0x680000>;
                };
        };

        gpio-export {
                compatible = "gpio-export";

                lcd_ctrl1 {
                        gpio-export,name = "lcd_ctrl1";
                        gpio-export,output = <0>;
                        gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
                };
        };
};

&pinctrl {
        state_default: pinctrl0 {
                gpio {
                        ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
                        ralink,function = "gpio";
                };
        };
};

&ethernet {
        mtd-mac-address = <&factory 0x28>;
};

&esw {
        mediatek,portmap = <0x2f>;
};

&wmac {
        ralink,mtd-eeprom = <&factory 0>;
};

&otg {
        status = "okay";
};