OpenWrt – Rev 2

?pathlinks?

Rev 1 – Blame – Compare with Previous – Last modification – View Log – Download

/*
 * Device Tree file for the Edimax BR-6478AC V2
 * based on Linksys E1700
 *
 * Copyright (C) 2016 Rohan Murch <rohan.murch@gmail.com>
 * Copyright (C) 2016 Hans Ulli Kroll <ulli.kroll@googlemail.com>
 * Copyright (C) 2017 James McKenzie <openwrt@madingley.org>
 *
 * This file is licensed under the terms of the GNU General Public
 * License version 2.  This program is licensed "as is" without any
 * warranty of any kind, whether express or implied.
 */

/dts-v1/;

#include "mt7620a.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
        compatible = "edimax,br-6478ac-v2", "ralink,mt7620a-soc";
        model = "Edimax BR-6478AC v2";

        aliases {
                led-boot = &led_power;
                led-failsafe = &led_power;
                led-running = &led_power;
                led-upgrade = &led_power;
        };

        chosen {
                bootargs = "console=ttyS0,57600";
        };

        keys {
                compatible = "gpio-keys-polled";
                poll-interval = <20>;

                reset_wps {
                        label = "reset_wps";
                        gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
                };
        };

        leds {
                compatible = "gpio-leds";

                led_power: power {
                        label = "br-6478ac-v2:white:power";
                        gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
                };
                internet {
                        label = "br-6478ac-v2:blue:internet";
                        gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
                };
                wlan {
                        label = "br-6478ac-v2:blue:wlan";
                        gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
                };
                usb {
                        label = "br-6478ac-v2:blue:usb";
                        gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
                        trigger-sources = <&ohci_port1>, <&ehci_port1>;
                        linux,default-trigger = "usbport";
                };
        };


        gpio_export {
                compatible = "gpio-export";
                #size-cells = <0>;
                usb-power {
                        gpio-export,name="usb-power";
                        gpio-export,output=<1>;
                        gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
                };
        };
};


&gpio2 {
        status = "okay";
};

&spi0 {
        status = "okay";

        flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0 0>;
                spi-max-frequency = <10000000>;

                partitions {
                        compatible = "fixed-partitions";
                        #address-cells = <1>;
                        #size-cells = <1>;

                        partition@0 {
                                label = "u-boot";
                                reg = <0x0 0x30000>;
                                read-only;
                        };

                        partition@30000 {
                                label = "u-boot-env";
                                reg = <0x30000 0x10000>;
                                read-only;
                        };

                        factory: partition@40000 {
                                label = "factory";
                                reg = <0x40000 0x10000>;
                                read-only;
                        };

                        partition@50000 {
                                label = "cimage";
                                reg = <0x50000 0x20000>;
                                read-only;
                        };

                        partition@70000 {
                                compatible = "edimax,uimage";
                                label = "firmware";
                                reg = <0x00070000 0x00790000>;
                        };
                };
        };
};

&pinctrl {
        state_default: pinctrl0 {
                gpio {
                        ralink,group = "i2c", "uartf", "nd_sd";
                        ralink,function = "gpio";
                };
        };
};

&ethernet {
        status = "okay";
        mtd-mac-address = <&factory 0x4>;
        pinctrl-names = "default";
        pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
        mediatek,portmap = "wllll";

        port@5 {
                status = "okay";
                mediatek,fixed-link = <1000 1 1 1>;
                phy-mode = "rgmii";
        };

        mdio-bus {
                status = "okay";

                phy0: ethernet-phy@0 {
                        reg = <0>;
                        phy-mode = "rgmii";
                };

                phy1: ethernet-phy@1 {
                        reg = <1>;
                        phy-mode = "rgmii";
                };

                phy2: ethernet-phy@2 {
                        reg = <2>;
                        phy-mode = "rgmii";
                };

                phy3: ethernet-phy@3 {
                        reg = <3>;
                        phy-mode = "rgmii";
                };

                phy4: ethernet-phy@4 {
                        reg = <4>;
                        phy-mode = "rgmii";
                };

                phy1f: ethernet-phy@1f {
                        reg = <0x1f>;
                        phy-mode = "rgmii";
                };
        };
};

&gsw {
        mediatek,port4 = "gmac";
};

&wmac {
        ralink,mtd-eeprom = <&factory 0>;
};

&pcie {
        status = "okay";
};

&pcie0 {
        wifi@0,0 {
                reg = <0x0000 0 0 0 0>;
                mediatek,mtd-eeprom = <&factory 0x8000>;
                mediatek,2ghz = <0>;
        };
};

&ehci {
        status = "okay";
};

&ohci {
        status = "okay";
};