OpenWrt – Rev 3

Subversion Repositories:
Rev:
/dts-v1/;

#include "mt7620a.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
        compatible = "planex,cs-qr10", "ralink,mt7620a-soc";
        model = "YUKAI Engineering BOCCO";

        gpio-keys-polled {
                compatible = "gpio-keys-polled";
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;

                reset {
                        label = "reset";
                        gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
                };
        };

        gpio_export {
                compatible = "gpio-export";
                #size-cells = <0>;

                s1 {
                        gpio-export,name = "rec";
                        gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
                };
                s2 {
                        gpio-export,name = "play";
                        gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
                };
        };

        sound {
                compatible = "simple-audio-card";
                simple-audio-card,name = "Audio-I2S";
                simple-audio-card,format = "i2s";
                simple-audio-card,bitclock-master = <&dailink0_master>;
                simple-audio-card,frame-master = <&dailink0_master>;
                simple-audio-card,widgets =
                        "Headphone", "Headphones";
                simple-audio-card,routing =
                        "Headphones", "HP_L",
                        "Headphones", "HP_R";
                simple-audio-card,mclk-fs = <256>;

                simple-audio-card,cpu {
                        sound-dai = <&i2s>;
                };

                dailink0_master: simple-audio-card,codec {
                        sound-dai = <&codec>;
                };
        };
};

&gpio0 {
        status = "okay";
};

&gpio1 {
        status = "okay";
};

&gpio2 {
        status = "okay";
};

&gpio3 {
        status = "okay";
};

&i2c {
        status = "okay";

        codec: wm8960@1a {
                #sound-dai-cells = <0>;
                compatible = "wlf,wm8960";
                reg = <0x1a>;

                wlf,shared-lrclk;
        };
};

&i2s {
        #sound-dai-cells = <0>;
        status = "okay";
        pinctrl-names = "default";
        pinctrl-0 = <&pcm_i2s_pins>;
};

&spi0 {
        status = "okay";

        m25p80@0 {
                #address-cells = <1>;
                #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;

                partition@0 {
                        label = "u-boot";
                        reg = <0x0 0x30000>;
                        read-only;
                };

                partition@30000 {
                        label = "u-boot-env";
                        reg = <0x30000 0x10000>;
                        read-only;
                };

                factory: partition@40000 {
                        label = "factory";
                        reg = <0x40000 0x10000>;
                        read-only;
                };

                partition@50000 {
                        label = "firmware";
                        reg = <0x50000 0x7b0000>;
                };
        };
};

&pcm {
        status = "okay";
};

&gdma {
        status = "okay";
};

&pinctrl {
        state_default: pinctrl0 {
                gpio {
                        ralink,group = "spi refclk", "rgmii1";
                        ralink,function = "gpio";
                };
        };
};

&ethernet {
        pinctrl-names = "default";
        pinctrl-0 = <&ephy_pins>;
        mtd-mac-address = <&factory 0x4>;
        mediatek,portmap = "llllw";
};

&gsw {
        ralink,port4 = "ephy";
};

&wmac {
        ralink,mtd-eeprom = <&factory 0>;
};