OpenWrt – Rev 1

?pathlinks?

Rev 2 – Go to most recent revision – Blame – Compare with Previous – Last modification – View Log – Download

/dts-v1/;

#include "mt7620a.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
        compatible = "tplink,mr200", "ralink,mt7620a-soc";
        model = "TP-Link Archer MR200";

        aliases {
                led-boot = &led_power;
                led-failsafe = &led_power;
                led-running = &led_power;
                led-upgrade = &led_power;
        };

        chosen {
                bootargs = "console=ttyS0,115200";
        };

        leds {
                compatible = "gpio-leds";

                lan {
                        label = "mr200:white:lan";
                        gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
                };

                wan {
                        label = "mr200:white:wan";
                        gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
                };

                led_power: power {
                        label = "mr200:white:power";
                        gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
                };

                4g {
                        label = "mr200:white:4g";
                        gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
                };

                wps {
                        label = "mr200:white:wps";
                        gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
                };

                signal1 {
                        label = "mr200:white:signal1";
                        gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
                };

                signal2 {
                        label = "mr200:white:signal2";
                        gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
                };

                signal3 {
                        label = "mr200:white:signal3";
                        gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
                };

                signal4 {
                        label = "mr200:white:signal4";
                        gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
                };

                wlan {
                        label = "mr200:white:wlan";
                        gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
                };
        };

        keys {
                compatible = "gpio-keys";

                reset {
                        label = "reset";
                        gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
                        linux,code = <KEY_RESTART>;
                };

                rfkill {
                        label = "rfkill";
                        gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
                        linux,code = <KEY_RFKILL>;
                };
        };

        gpio_export {
                compatible = "gpio-export";
                #size-cells = <0>;

                power_usb {
                        gpio-export,name = "power_usb1";
                        gpio-export,output = <1>;
                        gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
                };
        };
};

&gpio1 {
        status = "okay";
};

&gpio2 {
        status = "okay";
};

&gpio3 {
        status = "okay";
};

&spi0 {
        status = "okay";

        m25p80@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;

                partitions {
                        compatible = "fixed-partitions";
                        #address-cells = <1>;
                        #size-cells = <1>;

                        partition@0 {
                                label = "u-boot";
                                reg = <0x0 0x20000>;
                                read-only;
                        };

                        partition@20000 {
                                compatible = "tplink,firmware";
                                label = "firmware";
                                reg = <0x20000 0x7b0000>;
                        };

                        rom: partition@7d0000 {
                                label = "rom";
                                reg = <0x7d0000 0x10000>;
                                read-only;
                        };

                        partition@7e0000 {
                                label = "romfile";
                                reg = <0x7e0000 0x10000>;
                                read-only;
                        };

                        radio: partition@7f0000 {
                                label = "radio";
                                reg = <0x7f0000 0x10000>;
                                read-only;
                        };
                };
        };
};

&pinctrl {
        state_default: pinctrl0 {
                gpio {
                        ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd", "ephy", "spi refclk";
                        ralink,function = "gpio";
                };
        };
};

&ethernet {
                mtd-mac-address = <&rom 0xf100>;
                mediatek,portmap = "llll";
        };

&ehci {
        status = "okay";
};

&ohci {
        status = "okay";
};

&gsw {
        mediatek,port4 = "ephy";
};

&wmac {
        ralink,mtd-eeprom = <&radio 0>;
};

&pcie {
        status = "okay";
};

&pcie0 {
        mt76@0,0 {
                reg = <0x0000 0 0 0 0>;
                mediatek,mtd-eeprom = <&radio 32768>;
        };
};