OpenWrt – Rev 2
?pathlinks?
From 83131acbfb59760a19f3711c09526e191c8aad54 Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jogo@openwrt.org>
Date: Tue, 29 Jul 2014 21:52:56 +0200
Subject: [PATCH 03/10] MIPS: BCM63XX: make fallback sprom optional
Some devices do not provide enough mac addresses to populate wifi in
addition to ethernet.
Use having pci enabled as a rough heuristic which boards should have it
enabled.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
---
arch/mips/bcm63xx/boards/board_bcm963xx.c | 12 ++++++++++++
arch/mips/bcm63xx/boards/board_common.c | 5 +++--
arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h | 1 +
3 files changed, 16 insertions(+), 2 deletions(-)
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -70,6 +70,7 @@ static struct board_info __initdata boar
.has_uart0 = 1,
.has_pci = 1,
.has_usbd = 0,
+ .use_fallback_sprom = 1,
.usbd = {
.use_fullspeed = 0,
@@ -219,6 +220,7 @@ static struct board_info __initdata boar
.has_uart0 = 1,
.has_enet0 = 1,
.has_pci = 1,
+ .use_fallback_sprom = 1,
.enet0 = {
.has_phy = 1,
@@ -264,6 +266,7 @@ static struct board_info __initdata boar
.has_enet0 = 1,
.has_enet1 = 1,
.has_pci = 1,
+ .use_fallback_sprom = 1,
.enet0 = {
.has_phy = 1,
@@ -316,6 +319,7 @@ static struct board_info __initdata boar
.has_enet0 = 1,
.has_enet1 = 1,
.has_pci = 1,
+ .use_fallback_sprom = 1,
.enet0 = {
.has_phy = 1,
@@ -370,6 +374,7 @@ static struct board_info __initdata boar
.has_enet0 = 1,
.has_enet1 = 1,
.has_pci = 1,
+ .use_fallback_sprom = 1,
.enet0 = {
.has_phy = 1,
@@ -420,6 +425,7 @@ static struct board_info __initdata boar
.has_enet0 = 1,
.has_enet1 = 1,
.has_pci = 1,
+ .use_fallback_sprom = 1,
.enet0 = {
.has_phy = 1,
@@ -443,6 +449,7 @@ static struct board_info __initdata boar
.has_enet0 = 1,
.has_enet1 = 1,
.has_pci = 1,
+ .use_fallback_sprom = 1,
.enet0 = {
.has_phy = 1,
@@ -461,6 +468,7 @@ static struct board_info __initdata boar
.has_uart0 = 1,
.has_pci = 1,
+ .use_fallback_sprom = 1,
.has_ohci0 = 1,
.has_enet0 = 1,
@@ -483,6 +491,7 @@ static struct board_info __initdata boar
.has_enet0 = 1,
.has_enet1 = 1,
.has_pci = 1,
+ .use_fallback_sprom = 1,
.enet0 = {
.has_phy = 1,
@@ -509,6 +518,7 @@ static struct board_info __initdata boar
.has_enet0 = 1,
.has_enet1 = 1,
.has_pci = 1,
+ .use_fallback_sprom = 1,
.enet0 = {
.has_phy = 1,
@@ -561,6 +571,7 @@ static struct board_info __initdata boar
.has_enet0 = 1,
.has_enet1 = 1,
.has_pci = 1,
+ .use_fallback_sprom = 1,
.enet0 = {
.has_phy = 1,
@@ -632,6 +643,7 @@ static struct board_info __initdata boar
.has_enet0 = 1,
.has_enet1 = 1,
.has_pci = 1,
+ .use_fallback_sprom = 1,
.enet0 = {
.has_phy = 1,
--- a/arch/mips/bcm63xx/boards/board_common.c
+++ b/arch/mips/bcm63xx/boards/board_common.c
@@ -183,8 +183,9 @@ int __init board_register_devices(void)
* do this after registering enet devices
*/
- if (board_get_mac_address(board.fallback_sprom.mac_addr) ||
- bcm63xx_register_fallback_sprom(&board.fallback_sprom))
+ if (board.use_fallback_sprom &&
+ (board_get_mac_address(board.fallback_sprom.mac_addr) ||
+ bcm63xx_register_fallback_sprom(&board.fallback_sprom)))
pr_err(PFX "failed to register fallback SPROM\n");
bcm63xx_spi_register();
--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
@@ -33,6 +33,7 @@ struct board_info {
unsigned int has_usbd:1;
unsigned int has_uart0:1;
unsigned int has_uart1:1;
+ unsigned int use_fallback_sprom:1;
/* ethernet config */
struct bcm63xx_enet_platform_data enet0;