OpenWrt – Rev 3

Subversion Repositories:
Rev:
/*
 *  AVM FRITZ!Box 4020 board support
 *
 *  Copyright (C) 2018 David Bauer <mail@david-bauer.net>
 *
 *  This program is free software; you can redistribute it and/or modify it
 *  under the terms of the GNU General Public License version 2 as published
 *  by the Free Software Foundation.
 */

#include <linux/init.h>
#include <linux/ath9k_platform.h>
#include <linux/etherdevice.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>

#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/platform_data/mdio-gpio.h>
#include <linux/spi/spi_gpio.h>
#include <linux/spi/74x164.h>

#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h>

#include "common.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-spi.h"
#include "dev-usb.h"
#include "dev-wmac.h"
#include "machtypes.h"


#define FRITZ4020_GPIO_SHIFT_SER                        19   /* DS,   Data Serial Input */
#define FRITZ4020_GPIO_SHIFT_SRCLK                      20 /* SHCP, Shift Reg Clock Input */

#define FRITZ4020_SSR_BIT_0                             0
#define FRITZ4020_SSR_BIT_1                             1
#define FRITZ4020_SSR_BIT_2                             2
#define FRITZ4020_SSR_BIT_3                             3
#define FRITZ4020_SSR_BIT_4                             4
#define FRITZ4020_SSR_BIT_5                             5
#define FRITZ4020_SSR_BIT_6                             6
#define FRITZ4020_SSR_BIT_7                             7

#define FRITZ4020_74HC_GPIO_BASE                        32
#define FRITZ4020_74HC_GPIO_LED_LAN                     (FRITZ4020_74HC_GPIO_BASE + 0)
#define FRITZ4020_74HC_GPIO_LED_INFO_RED                (FRITZ4020_74HC_GPIO_BASE + 1)
#define FRITZ4020_74HC_GPIO_LED_POWER                   (FRITZ4020_74HC_GPIO_BASE + 2)
#define FRITZ4020_74HC_GPIO_LED_WLAN                    (FRITZ4020_74HC_GPIO_BASE + 3)
#define FRITZ4020_74HC_GPIO_LED_WAN                     (FRITZ4020_74HC_GPIO_BASE + 4)
#define FRITZ4020_74HC_GPIO_USB_RST                     (FRITZ4020_74HC_GPIO_BASE + 5)
#define FRITZ4020_74HC_GPIO_LED_INFO                    (FRITZ4020_74HC_GPIO_BASE + 6)


#define FRITZ4020_GPIO_BTN_WPS                          2
#define FRITZ4020_GPIO_BTN_WLAN                         21
#define FRITZ4020_KEYS_POLL_INTERVAL                    20 /* msecs */
#define FRITZ4020_KEYS_DEBOUNCE_INTERVAL                (3 * FRITZ4020_KEYS_POLL_INTERVAL)

#define FRTIZ4020_OFFSET_URLADER_WIFI_MAC_REVERSE       0x1979


static struct spi_gpio_platform_data fritz4020_spi_data = {
        .sck            = FRITZ4020_GPIO_SHIFT_SRCLK,
        .miso           = SPI_GPIO_NO_MISO,
        .mosi           = FRITZ4020_GPIO_SHIFT_SER,
        .num_chipselect = 1,
};

static u8 fritz4020_ssr_initdata[] = {
        BIT(FRITZ4020_SSR_BIT_7) |
        BIT(FRITZ4020_SSR_BIT_6) |
        BIT(FRITZ4020_SSR_BIT_5) |
        BIT(FRITZ4020_SSR_BIT_4) |
        BIT(FRITZ4020_SSR_BIT_3) |
        BIT(FRITZ4020_SSR_BIT_2) |
        BIT(FRITZ4020_SSR_BIT_1)
};

static struct gen_74x164_chip_platform_data fritz4020_ssr_data = {
        .base = FRITZ4020_74HC_GPIO_BASE,
        .num_registers = ARRAY_SIZE(fritz4020_ssr_initdata),
        .init_data = fritz4020_ssr_initdata,
};

static struct platform_device fritz4020_spi_device = {
        .name           = "spi_gpio",
        .id             = 1,
        .dev = {
                .platform_data = &fritz4020_spi_data,
        },
};

static struct spi_board_info fritz4020_spi_info[] = {
        {
                .bus_num                = 1,
                .chip_select            = 0,
                .max_speed_hz           = 10000000,
                .modalias               = "74x164",
                .platform_data          = &fritz4020_ssr_data,
                .controller_data        = (void *) 0x0,
        },
};

static struct mtd_partition fritz4020_flash_partitions[] = {
        {
                .name           = "urlader",
                .offset         = 0,
                .size           = 0x0020000,
                .mask_flags     = MTD_WRITEABLE,
        }, {
                .name           = "firmware",
                .offset         = 0x0020000,
                .size           = 0x0EE0000,
        }, {
                .name           = "tffs (1)",
                .offset         = 0x0f00000,
                .size           = 0x0080000,
                .mask_flags     = MTD_WRITEABLE,
        }, {
                .name           = "tffs (2)",
                .offset         = 0x0f80000,
                .size           = 0x0080000,
                .mask_flags     = MTD_WRITEABLE,
        }
};

static struct flash_platform_data fritz4020_flash_data = {
        .parts          = fritz4020_flash_partitions,
        .nr_parts       = ARRAY_SIZE(fritz4020_flash_partitions),
};

static struct gpio_led fritz4020_leds_gpio[] __initdata = {
        {
                .name           = "fritz4020:green:lan",
                .gpio           = FRITZ4020_74HC_GPIO_LED_LAN,
                .active_low     = 1,
        }, {
                .name           = "fritz4020:green:info",
                .gpio           = FRITZ4020_74HC_GPIO_LED_INFO,
                .active_low     = 1,
        }, {
                .name           = "fritz4020:red:info",
                .gpio           = FRITZ4020_74HC_GPIO_LED_INFO_RED,
                .active_low     = 1,
        }, {
                .name           = "fritz4020:green:power",
                .gpio           = FRITZ4020_74HC_GPIO_LED_POWER,
                .active_low     = 1,
        }, {
                .name           = "fritz4020:green:wlan",
                .gpio           = FRITZ4020_74HC_GPIO_LED_WLAN,
                .active_low     = 1,
        }, {
                .name           = "fritz4020:green:wan",
                .gpio           = FRITZ4020_74HC_GPIO_LED_WAN,
                .active_low     = 1,
        },
};

static struct gpio_keys_button fritz4020_gpio_keys[] __initdata = {
        {
                .desc                   = "RFKILL button",
                .type                   = EV_KEY,
                .code                   = KEY_RFKILL,
                .debounce_interval      = FRITZ4020_KEYS_DEBOUNCE_INTERVAL,
                .gpio                   = FRITZ4020_GPIO_BTN_WLAN,
                .active_low             = 0,
        },
        {
                .desc                   = "WPS button",
                .type                   = EV_KEY,
                .code                   = KEY_WPS_BUTTON,
                .debounce_interval      = FRITZ4020_KEYS_DEBOUNCE_INTERVAL,
                .gpio                   = FRITZ4020_GPIO_BTN_WPS,
                .active_low             = 0,
        },
};

static void __init fritz4020_setup(void) {
        u8 *urlader = (u8 *) KSEG1ADDR(0x1f000000);
        u8 wifi_mac[ETH_ALEN];

        ath79_register_m25p80(&fritz4020_flash_data);

        /* Initialize ethernet */
        ath79_extract_mac_reverse(urlader + FRTIZ4020_OFFSET_URLADER_WIFI_MAC_REVERSE, wifi_mac);
        ath79_setup_qca956x_eth_cfg(QCA956X_ETH_CFG_SW_PHY_SWAP |
                                    QCA956X_ETH_CFG_SW_PHY_ADDR_SWAP);

        ath79_register_mdio(0, 0x0);
        ath79_register_mdio(1, 0x0);
        ath79_init_mac(ath79_eth0_data.mac_addr, wifi_mac, -1);
        ath79_init_mac(ath79_eth1_data.mac_addr, wifi_mac, -2);

        /* WAN port */
        ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
        ath79_eth0_data.speed = SPEED_100;
        ath79_eth0_data.duplex = DUPLEX_FULL;
        ath79_eth0_data.phy_mask = BIT(0);
        ath79_register_eth(0);

        /* LAN ports */
        ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
        ath79_eth1_data.speed = SPEED_1000;
        ath79_eth1_data.duplex = DUPLEX_FULL;
        ath79_switch_data.phy_poll_mask |= BIT(0);
        ath79_switch_data.phy4_mii_en = 1;
        ath79_register_eth(1);

        /* Initialize 2.4GHz WiFi */
        ath79_register_wmac_simple();

        /* Activate USB Power */
        gpio_request_one(FRITZ4020_74HC_GPIO_USB_RST,
                         GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
                         "USB power");

        /* Initialize USB port */
        ath79_register_usb();

        /* Register LED shift-register */
        spi_register_board_info(fritz4020_spi_info,
                                ARRAY_SIZE(fritz4020_spi_info));
        platform_device_register(&fritz4020_spi_device);

        /* Register GPIO buttons */
        ath79_register_gpio_keys_polled(-1, FRITZ4020_KEYS_POLL_INTERVAL,
                                        ARRAY_SIZE(fritz4020_gpio_keys),
                                        fritz4020_gpio_keys);

        /* Register LEDs */
        ath79_register_leds_gpio(-1, ARRAY_SIZE(fritz4020_leds_gpio),
                                 fritz4020_leds_gpio);
}

MIPS_MACHINE(ATH79_MACH_FRITZ4020, "FRITZ4020",
             "AVM FRITZ!Box 4020", fritz4020_setup);