OpenWrt – Rev 3
?pathlinks?
/*
* DomyWifi DW33D support
*
* Copyright (c) 2012 Qualcomm Atheros
* Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include <linux/platform_device.h>
#include <linux/ar8216_platform.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/platform/ar934x_nfc.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
#include "pci.h"
#include "dev-ap9x-pci.h"
#include "dev-gpio-buttons.h"
#include "dev-eth.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-nfc.h"
#include "dev-usb.h"
#include "dev-wmac.h"
#include "machtypes.h"
#define DW33D_GPIO_LED_MMC 4
#define DW33D_GPIO_LED_WLAN_2G 13
#define DW33D_GPIO_LED_STATUS 14
#define DW33D_GPIO_LED_USB 15
#define DW33D_GPIO_LED_INTERNET 22
#define DW33D_GPIO_BTN_RESET 17
#define DW33D_KEYS_POLL_INTERVAL 20 /* msecs */
#define DW33D_KEYS_DEBOUNCE_INTERVAL (3 * DW33D_KEYS_POLL_INTERVAL)
#define DW33D_MAC0_OFFSET 0
#define DW33D_MAC1_OFFSET 6
#define DW33D_WMAC_OFFSET 12
#define DW33D_WMAC_CALDATA_OFFSET 0x1000
#define DW33D_PCIE_CALDATA_OFFSET 0x5000
static struct gpio_led dw33d_leds_gpio[] __initdata = {
{
.name = "dw33d:blue:status",
.gpio = DW33D_GPIO_LED_STATUS,
.active_low = 1,
},
{
.name = "dw33d:blue:mmc",
.gpio = DW33D_GPIO_LED_MMC,
.active_low = 1,
},
{
.name = "dw33d:blue:usb",
.gpio = DW33D_GPIO_LED_USB,
.active_low = 1,
},
{
.name = "dw33d:blue:wlan-2g",
.gpio = DW33D_GPIO_LED_WLAN_2G,
.active_low = 1,
},
{
.name = "dw33d:blue:internet",
.gpio = DW33D_GPIO_LED_INTERNET,
.active_low = 1,
}
};
static struct gpio_keys_button dw33d_gpio_keys[] __initdata = {
{
.desc = "Reset button",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = DW33D_KEYS_DEBOUNCE_INTERVAL,
.gpio = DW33D_GPIO_BTN_RESET,
.active_low = 1,
}
};
/* GMAC6 of the QCA8337 switch is connected to the QCA9558 SoC via SGMII */
static struct ar8327_pad_cfg dw33d_qca8337_pad6_cfg = {
.mode = AR8327_PAD_MAC_SGMII,
.sgmii_delay_en = true,
};
/* GMAC0 of the QCA8337 switch is connected to the QCA9558 SoC via RGMII */
static struct ar8327_pad_cfg dw33d_qca8337_pad0_cfg = {
.mode = AR8327_PAD_MAC_RGMII,
.txclk_delay_en = true,
.rxclk_delay_en = true,
.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
};
static struct ar8327_platform_data dw33d_qca8337_data = {
.pad0_cfg = &dw33d_qca8337_pad0_cfg,
.pad6_cfg = &dw33d_qca8337_pad6_cfg,
.port0_cfg = {
.force_link = 1,
.speed = AR8327_PORT_SPEED_1000,
.duplex = 1,
.txpause = 1,
.rxpause = 1,
},
.port6_cfg = {
.force_link = 1,
.speed = AR8327_PORT_SPEED_1000,
.duplex = 1,
.txpause = 1,
.rxpause = 1,
},
};
static struct mdio_board_info dw33d_mdio0_info[] = {
{
.bus_id = "ag71xx-mdio.0",
.phy_addr = 0,
.platform_data = &dw33d_qca8337_data,
},
};
static void __init dw33d_setup(void)
{
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
ath79_register_m25p80(NULL);
ath79_register_leds_gpio(-1, ARRAY_SIZE(dw33d_leds_gpio),
dw33d_leds_gpio);
ath79_register_gpio_keys_polled(-1, DW33D_KEYS_POLL_INTERVAL,
ARRAY_SIZE(dw33d_gpio_keys),
dw33d_gpio_keys);
ath79_register_usb();
ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW);
ath79_register_nfc();
ath79_register_pci();
ath79_register_wmac(art + DW33D_WMAC_CALDATA_OFFSET, art + DW33D_WMAC_OFFSET);
ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
ath79_register_mdio(0, 0x0);
ath79_init_mac(ath79_eth0_data.mac_addr, art + DW33D_MAC0_OFFSET, 0);
ath79_init_mac(ath79_eth1_data.mac_addr, art + DW33D_MAC1_OFFSET, 0);
mdiobus_register_board_info(dw33d_mdio0_info,
ARRAY_SIZE(dw33d_mdio0_info));
/* GMAC0 is connected to the RMGII interface */
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.phy_mask = BIT(0);
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
ath79_eth0_pll_data.pll_1000 = 0x56000000;
ath79_register_eth(0);
/* GMAC1 is connected tot eh SGMII interface */
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
ath79_eth1_data.speed = SPEED_1000;
ath79_eth1_data.duplex = DUPLEX_FULL;
ath79_eth1_pll_data.pll_1000 = 0x03000101;
ath79_register_eth(1);
}
MIPS_MACHINE(ATH79_MACH_DOMYWIFI_DW33D, "DW33D",
"DomyWifi DW33D",
dw33d_setup);