OpenWrt – Diff between revs 2 and 3

Subversion Repositories:
Rev:
Show entire file – Ignore whitespace
Rev 2 Rev 3
Line 7... Line 7...
7   7  
8 / { 8 / {
9 compatible = "youku,yk1", "ralink,mt7620a-soc"; 9 compatible = "youku,yk1", "ralink,mt7620a-soc";
Line 10... Line -...
10 model = "YOUKU YK1"; -  
11   -  
12 aliases { -  
13 led-boot = &led_power; -  
14 led-failsafe = &led_power; -  
15 led-running = &led_power; -  
16 led-upgrade = &led_power; -  
17 }; 10 model = "YOUKU YK1";
18   11  
19 leds { 12 gpio-leds {
20 compatible = "gpio-leds"; 13 compatible = "gpio-leds";
21 wan { 14 wan {
22 label = "youku-yk1:blue:wan"; 15 label = "youku-yk1:blue:wan";
Line 27... Line 20...
27 gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; 20 gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
28 }; 21 };
29 usb { 22 usb {
30 label = "youku-yk1:blue:usb"; 23 label = "youku-yk1:blue:usb";
31 gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; 24 gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
32 trigger-sources = <&ohci_port1>, <&ehci_port1>; -  
33 linux,default-trigger = "usbport"; -  
34 }; 25 };
35 led_power: power { 26 power {
36 label = "youku-yk1:blue:power"; 27 label = "youku-yk1:blue:power";
37 gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; 28 gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
38 }; 29 };
39 }; 30 };
Line 40... Line 31...
40   31  
41 keys { 32 gpio-keys-polled {
-   33 compatible = "gpio-keys-polled";
-   34 #address-cells = <1>;
42 compatible = "gpio-keys-polled"; 35 #size-cells = <0>;
43 poll-interval = <20>; 36 poll-interval = <20>;
44 reset { 37 reset {
45 label = "reset"; 38 label = "reset";
46 gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; 39 gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
Line 67... Line 60...
67   60  
68 &spi0 { 61 &spi0 {
Line 69... Line 62...
69 status = "okay"; 62 status = "okay";
-   63  
-   64 m25p80@0 {
70   65 #address-cells = <1>;
71 m25p80@0 { 66 #size-cells = <1>;
72 compatible = "mx25l25635f", "jedec,spi-nor"; 67 compatible = "jedec,spi-nor";
-   68 reg = <0>;
-   69 spi-max-frequency = <10000000>;
-   70  
-   71 partition@0 {
-   72 label = "u-boot";
-   73 reg = <0x0 0x30000>;
-   74 read-only;
-   75 };
-   76  
-   77 partition@30000 {
-   78 label = "u-boot-env";
-   79 reg = <0x30000 0x10000>;
-   80 read-only;
-   81 };
-   82  
-   83 factory: partition@40000 {
73 reg = <0>; 84 label = "factory";
-   85 reg = <0x40000 0x10000>;
Line 74... Line -...
74 spi-max-frequency = <25000000>; -  
75 m25p,fast-read; -  
76   -  
77 partitions { -  
78 compatible = "fixed-partitions"; -  
79 #address-cells = <1>; -  
80 #size-cells = <1>; -  
81   -  
82 partition@0 { -  
83 label = "u-boot"; -  
84 reg = <0x0 0x30000>; -  
85 read-only; -  
86 }; -  
87   -  
88 partition@30000 { -  
89 label = "u-boot-env"; -  
90 reg = <0x30000 0x10000>; -  
91 read-only; -  
92 }; -  
93   -  
94 factory: partition@40000 { -  
95 label = "factory"; -  
96 reg = <0x40000 0x10000>; -  
97 read-only; 86 read-only;
98 }; -  
99   87 };
100 partition@50000 { 88  
101 compatible = "denx,uimage"; -  
102 label = "firmware"; 89 partition@50000 {
103 reg = <0x50000 0x1fb0000>; 90 label = "firmware";
104 }; 91 reg = <0x50000 0x1fb0000>;
Line 105... Line 92...
105 }; 92 };