OpenWrt – Diff between revs 2 and 3

Subversion Repositories:
Rev:
Show entire file – Ignore whitespace
Rev 2 Rev 3
Line 7... Line 7...
7   7  
8 / { 8 / {
9 compatible = "linksys,re6500", "mediatek,mt7621-soc"; 9 compatible = "linksys,re6500", "mediatek,mt7621-soc";
Line 10... Line -...
10 model = "Linksys RE6500"; -  
11   -  
12 aliases { -  
13 led-boot = &led_power; -  
14 led-failsafe = &led_power; -  
15 led-running = &led_power; -  
16 led-upgrade = &led_power; -  
17 }; 10 model = "Linksys RE6500";
18   11  
19 memory@0 { 12 memory@0 {
20 device_type = "memory"; 13 device_type = "memory";
Line 21... Line 14...
21 reg = <0x0 0x4000000>; 14 reg = <0x0 0x4000000>;
22 }; 15 };
23   16  
Line 24... Line 17...
24 chosen { 17 chosen {
25 bootargs = "console=ttyS0,57600"; 18 bootargs = "console=ttyS0,57600";
Line 26... Line 19...
26 }; 19 };
27   20  
28 leds { 21 gpio-leds {
29 compatible = "gpio-leds"; 22 compatible = "gpio-leds";
Line 30... Line 23...
30   23  
31 wifi { 24 wifi {
32 label = "re6500:orange:wifi"; 25 label = "re6500:orange:wifi";
33 gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; 26 gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
34 }; 27 };
Line 35... Line 28...
35   28  
36 led_power: power { 29 power {
-   30 label = "re6500:white:power";
-   31 gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
37 label = "re6500:white:power"; 32 };
Line 38... Line 33...
38 gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; 33 };
39 }; 34  
40 }; 35 gpio-keys-polled {
Line 59... Line 54...
59   54  
60 &spi0 { 55 &spi0 {
Line 61... Line 56...
61 status = "okay"; 56 status = "okay";
-   57  
-   58 m25p80@0 {
62   59 #address-cells = <1>;
63 m25p80@0 { 60 #size-cells = <1>;
64 compatible = "jedec,spi-nor"; 61 compatible = "jedec,spi-nor";
-   62 reg = <0>;
-   63 spi-max-frequency = <10000000>;
-   64 m25p,chunked-io = <32>;
-   65  
-   66 partition@0 {
-   67 label = "u-boot";
-   68 reg = <0x0 0x30000>;
-   69 read-only;
-   70 };
-   71  
-   72 partition@30000 {
-   73 label = "u-boot-env";
-   74 reg = <0x30000 0x10000>;
Line 65... Line -...
65 reg = <0>; -  
66 spi-max-frequency = <10000000>; -  
67   -  
68 partitions { -  
69 compatible = "fixed-partitions"; -  
70 #address-cells = <1>; -  
71 #size-cells = <1>; -  
72   -  
73 partition@0 { -  
74 label = "u-boot"; -  
75 reg = <0x0 0x30000>; -  
76 read-only; -  
77 }; -  
78   -  
79 partition@30000 { -  
80 label = "u-boot-env"; -  
81 reg = <0x30000 0x10000>; -  
82 read-only; 75 read-only;
83 }; 76 };
84   77  
85 factory: partition@40000 { 78 factory: partition@40000 {
86 label = "factory"; 79 label = "factory";
87 reg = <0x40000 0x10000>; 80 reg = <0x40000 0x10000>;
88 read-only; 81 read-only;
89 }; -  
90   82 };
91 partition@50000 { 83  
92 compatible = "denx,uimage"; -  
93 label = "firmware"; 84 partition@50000 {
94 reg = <0x50000 0x7b0000>; 85 label = "firmware";
95 }; 86 reg = <0x50000 0x7b0000>;
Line 96... Line 87...
96 }; 87 };
Line 106... Line 97...
106 }; 97 };
107 }; 98 };
Line 108... Line 99...
108   99  
109 &pcie { 100 &pcie {
110 status = "okay"; -  
Line 111... Line 101...
111 }; 101 status = "okay";
112   102  
113 &pcie0 { 103 pcie0 {
-   104 mt76@0,0 {
114 mt76@0,0 { 105 reg = <0x0000 0 0 0 0>;
115 reg = <0x0000 0 0 0 0>; 106 device_type = "pci";
-   107 mediatek,mtd-eeprom = <&factory 0x0000>;
116 mediatek,mtd-eeprom = <&factory 0x0000>; 108 ieee80211-freq-limit = <5000000 6000000>;
117 ieee80211-freq-limit = <5000000 6000000>; -  
Line 118... Line 109...
118 }; 109 };
119 }; 110 };
120   111  
-   112 pcie1 {
121 &pcie1 { 113 mt76@1,0 {
122 mt76@0,0 { 114 reg = <0x0000 0 0 0 0>;
-   115 device_type = "pci";
123 reg = <0x0000 0 0 0 0>; 116 mediatek,mtd-eeprom = <&factory 0x8000>;
124 mediatek,mtd-eeprom = <&factory 0x8000>; 117 ieee80211-freq-limit = <2400000 2500000>;
Line 125... Line 118...
125 ieee80211-freq-limit = <2400000 2500000>; 118 };
126 }; 119 };