OpenWrt – Diff between revs 2 and 3

Subversion Repositories:
Rev:
Show entire file – Ignore whitespace
Rev 2 Rev 3
Line 7... Line 7...
7   7  
8 / { 8 / {
9 compatible = "mofinetwork,mofi3500-3gn", "ralink,rt3052-soc"; 9 compatible = "mofinetwork,mofi3500-3gn", "ralink,rt3052-soc";
Line 10... Line -...
10 model = "MoFi Network MOFI3500-3GN"; -  
11   -  
12 aliases { -  
13 led-boot = &led_status; -  
14 led-failsafe = &led_status; -  
15 led-running = &led_status; -  
16 led-upgrade = &led_status; -  
17 }; 10 model = "MoFi Network MOFI3500-3GN";
18   11  
19 cfi@1f000000 { 12 cfi@1f000000 {
20 compatible = "cfi-flash"; 13 compatible = "cfi-flash";
21 reg = <0x1f000000 0x800000>; 14 reg = <0x1f000000 0x800000>;
-   15 bank-width = <2>;
-   16 device-width = <2>;
-   17 #address-cells = <1>;
-   18 #size-cells = <1>;
-   19  
-   20 partition@0 {
-   21 label = "u-boot";
-   22 reg = <0x0 0x30000>;
-   23 read-only;
-   24 };
-   25  
-   26 partition@30000 {
-   27 label = "u-boot-env";
-   28 reg = <0x30000 0x10000>;
-   29 read-only;
-   30 };
-   31  
-   32 factory: partition@40000 {
-   33 label = "factory";
-   34 reg = <0x40000 0x10000>;
Line 22... Line -...
22 bank-width = <2>; -  
23 device-width = <2>; -  
24   -  
25 partitions { -  
26 compatible = "fixed-partitions"; -  
27 #address-cells = <1>; -  
28 #size-cells = <1>; -  
29   -  
30 partition@0 { -  
31 label = "u-boot"; -  
32 reg = <0x0 0x30000>; -  
33 read-only; -  
34 }; -  
35   -  
36 partition@30000 { -  
37 label = "u-boot-env"; -  
38 reg = <0x30000 0x10000>; -  
39 read-only; -  
40 }; -  
41   -  
42 factory: partition@40000 { -  
43 label = "factory"; -  
44 reg = <0x40000 0x10000>; -  
45 read-only; 35 read-only;
46 }; -  
47   36 };
48 partition@50000 { 37  
49 compatible = "denx,uimage"; -  
50 label = "firmware"; 38 partition@50000 {
51 reg = <0x50000 0x7b0000>; 39 label = "firmware";
Line 52... Line 40...
52 }; 40 reg = <0x50000 0x7b0000>;
53 }; 41 };
Line 54... Line 42...
54 }; 42 };
55   43  
56 leds { 44 gpio-leds {
57 compatible = "gpio-leds"; -  
58   -  
59 usb { 45 compatible = "gpio-leds";
Line 60... Line 46...
60 label = "mofi3500-3gn:green:usb"; 46  
61 gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; 47 usb {
62 trigger-sources = <&otg_port1>; 48 label = "mofi3500-3gn:green:usb";
63 linux,default-trigger = "usbport"; 49 gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
Line 64... Line 50...
64 }; 50 };
65   51  
66 3g { 52 3g {
67 label = "mofi3500-3gn:green:3g"; 53 label = "mofi3500-3gn:green:3g";
Line 68... Line 54...
68 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; 54 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
69 }; 55 };
70   56  
71 led_status: status { 57 status {
72 label = "mofi3500-3gn:green:status"; 58 label = "mofi3500-3gn:green:status";
Line 73... Line 59...
73 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; 59 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
74 }; 60 };
-   61  
-   62 wps {
75   63 label = "mofi3500-3gn:green:wps";
Line 76... Line 64...
76 wps { 64 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
77 label = "mofi3500-3gn:green:wps"; 65 };
78 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; 66 };