OpenWrt – Diff between revs 2 and 3

Subversion Repositories:

?pathlinks?

Rev 2 – Details – Blame – Last modification – View Log

 # DO NOT EDIT. This file is generated from Config.src
+#
 # For a description of the syntax of this configuration file,
-# see docs/Kconfig-language.txt.
+# see scripts/kbuild/config-language.txt.
+#
 menu "Linux System Utilities"
 config BUSYBOX_CONFIG_ACPID
-	bool "acpid (9 kb)"
+	bool "acpid"
 	default BUSYBOX_DEFAULT_ACPID
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	acpid listens to ACPI events coming either in textual form from
+	  acpid listens to ACPI events coming either in textual form from
-	/proc/acpi/event (though it is marked deprecated it is still widely
+	  /proc/acpi/event (though it is marked deprecated it is still widely
-	used and _is_ a standard) or in binary form from specified evdevs
+	  used and _is_ a standard) or in binary form from specified evdevs
-	(just use /dev/input/event*).
+	  (just use /dev/input/event*).
-	It parses the event to retrieve ACTION and a possible PARAMETER.
+	  It parses the event to retrieve ACTION and a possible PARAMETER.
-	It then spawns /etc/acpi/<ACTION>[/<PARAMETER>] either via run-parts
+	  It then spawns /etc/acpi/<ACTION>[/<PARAMETER>] either via run-parts
-	(if the resulting path is a directory) or directly as an executable.
+	  (if the resulting path is a directory) or directly as an executable.
-	N.B. acpid relies on run-parts so have the latter installed.
+	  N.B. acpid relies on run-parts so have the latter installed.
 config BUSYBOX_CONFIG_FEATURE_ACPID_COMPAT
 	bool "Accept and ignore redundant options"
 	default BUSYBOX_DEFAULT_FEATURE_ACPID_COMPAT
 	depends on BUSYBOX_CONFIG_ACPID
 	help
-	Accept and ignore compatibility options -g -m -s -S -v.
-config BUSYBOX_CONFIG_BLKDISCARD
+	  Accept and ignore compatibility options -g -m -s -S -v.
-	bool "blkdiscard (4.3 kb)"
+config BUSYBOX_CONFIG_BLKDISCARD
-	default BUSYBOX_DEFAULT_BLKDISCARD
+	bool "blkdiscard"
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	default BUSYBOX_DEFAULT_BLKDISCARD
 	help
-	blkdiscard discards sectors on a given device.
+	  blkdiscard discards sectors on a given device.
 config BUSYBOX_CONFIG_BLKID
-	bool "blkid (12 kb)"
+	bool "blkid"
 	default BUSYBOX_DEFAULT_BLKID
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	select BUSYBOX_CONFIG_VOLUMEID
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	help
-	select BUSYBOX_CONFIG_VOLUMEID
+	  Lists labels and UUIDs of all filesystems.
-	help
+	  WARNING:
-	Lists labels and UUIDs of all filesystems.
+	  With all submodules selected, it will add ~8k to busybox.
 config BUSYBOX_CONFIG_FEATURE_BLKID_TYPE
 	bool "Print filesystem type"
 	default BUSYBOX_DEFAULT_FEATURE_BLKID_TYPE
 	depends on BUSYBOX_CONFIG_BLKID
 	help
-	Show TYPE="filesystem type"
+	  Show TYPE="filesystem type"
 config BUSYBOX_CONFIG_BLOCKDEV
-	bool "blockdev (2.3 kb)"
+	bool "blockdev"
 	default BUSYBOX_DEFAULT_BLOCKDEV
 	help
-	Performs some ioctls with block devices.
+	  Performs some ioctls with block devices.
 config BUSYBOX_CONFIG_CAL
-	bool "cal (5.8 kb)"
+	bool "cal"
 	default BUSYBOX_DEFAULT_CAL
 	help
-	cal is used to display a monthly calendar.
+	  cal is used to display a monthly calendar.
 config BUSYBOX_CONFIG_CHRT
-	bool "chrt (4.7 kb)"
+	bool "chrt"
 	default BUSYBOX_DEFAULT_CHRT
 	help
-	Manipulate real-time attributes of a process.
+	  manipulate real-time attributes of a process.
-	This requires sched_{g,s}etparam support in your libc.
+	  This requires sched_{g,s}etparam support in your libc.
 config BUSYBOX_CONFIG_DMESG
-	bool "dmesg (3.7 kb)"
+	bool "dmesg"
 	default BUSYBOX_DEFAULT_DMESG
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	dmesg is used to examine or control the kernel ring buffer. When the
+	  dmesg is used to examine or control the kernel ring buffer. When the
-	Linux kernel prints messages to the system log, they are stored in
+	  Linux kernel prints messages to the system log, they are stored in
-	the kernel ring buffer. You can use dmesg to print the kernel's ring
+	  the kernel ring buffer. You can use dmesg to print the kernel's ring
-	buffer, clear the kernel ring buffer, change the size of the kernel
+	  buffer, clear the kernel ring buffer, change the size of the kernel
-	ring buffer, and change the priority level at which kernel messages
+	  ring buffer, and change the priority level at which kernel messages
-	are also logged to the system console. Enable this option if you
+	  are also logged to the system console. Enable this option if you
-	wish to enable the 'dmesg' utility.
+	  wish to enable the 'dmesg' utility.
 config BUSYBOX_CONFIG_FEATURE_DMESG_PRETTY
 	bool "Pretty output"
 	default BUSYBOX_DEFAULT_FEATURE_DMESG_PRETTY
 	depends on BUSYBOX_CONFIG_DMESG
 	help
-	If you wish to scrub the syslog level from the output, say 'Y' here.
+	  If you wish to scrub the syslog level from the output, say 'Y' here.
-	The syslog level is a string prefixed to every line with the form
+	  The syslog level is a string prefixed to every line with the form
-	"<#>".
+	  "<#>".
-	With this option you will see:
+	  With this option you will see:
-		# dmesg
+	    # dmesg
-		Linux version 2.6.17.4 .....
+	    Linux version 2.6.17.4 .....
-		BIOS-provided physical RAM map:
+	    BIOS-provided physical RAM map:
-		 BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
+	     BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
-	Without this option you will see:
+	  Without this option you will see:
-		# dmesg
+	    # dmesg
-		<5>Linux version 2.6.17.4 .....
+	    <5>Linux version 2.6.17.4 .....
-		<6>BIOS-provided physical RAM map:
+	    <6>BIOS-provided physical RAM map:
-		<6> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
+	    <6> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
 config BUSYBOX_CONFIG_EJECT
-	bool "eject (4 kb)"
+	bool "eject"
 	default BUSYBOX_DEFAULT_EJECT
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	Used to eject cdroms. (defaults to /dev/cdrom)
+	  Used to eject cdroms. (defaults to /dev/cdrom)
 config BUSYBOX_CONFIG_FEATURE_EJECT_SCSI
 	bool "SCSI support"
 	default BUSYBOX_DEFAULT_FEATURE_EJECT_SCSI
 	depends on BUSYBOX_CONFIG_EJECT
 	help
-	Add the -s option to eject, this allows to eject SCSI-Devices and
+	  Add the -s option to eject, this allows to eject SCSI-Devices and
-	usb-storage devices.
+	  usb-storage devices.
 config BUSYBOX_CONFIG_FALLOCATE
-	bool "fallocate (4.1 kb)"
+	bool "fallocate"
 	default BUSYBOX_DEFAULT_FALLOCATE
 	help
-	Preallocate space for files.
+	  Preallocate space for files.
 config BUSYBOX_CONFIG_FATATTR
-	bool "fatattr (1.9 kb)"
+	bool "fatattr"
 	default BUSYBOX_DEFAULT_FATATTR
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	fatattr lists or changes the file attributes on a fat file system.
+	  fatattr lists or changes the file attributes on a fat file system.
 config BUSYBOX_CONFIG_FBSET
-	bool "fbset (5.9 kb)"
+	bool "fbset"
 	default BUSYBOX_DEFAULT_FBSET
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	fbset is used to show or change the settings of a Linux frame buffer
+	  fbset is used to show or change the settings of a Linux frame buffer
-	device. The frame buffer device provides a simple and unique
+	  device. The frame buffer device provides a simple and unique
-	interface to access a graphics display. Enable this option
+	  interface to access a graphics display. Enable this option
-	if you wish to enable the 'fbset' utility.
+	  if you wish to enable the 'fbset' utility.
 config BUSYBOX_CONFIG_FEATURE_FBSET_FANCY
 	bool "Enable extra options"
 	default BUSYBOX_DEFAULT_FEATURE_FBSET_FANCY
 	depends on BUSYBOX_CONFIG_FBSET
 	help
-	This option enables extended fbset options, allowing one to set the
+	  This option enables extended fbset options, allowing one to set the
-	framebuffer size, color depth, etc. interface to access a graphics
+	  framebuffer size, color depth, etc. interface to access a graphics
-	display. Enable this option if you wish to enable extended fbset
+	  display. Enable this option if you wish to enable extended fbset
-	options.
+	  options.
 config BUSYBOX_CONFIG_FEATURE_FBSET_READMODE
 	bool "Enable readmode support"
 	default BUSYBOX_DEFAULT_FEATURE_FBSET_READMODE
 	depends on BUSYBOX_CONFIG_FBSET
 	help
-	This option allows fbset to read the video mode database stored by
+	  This option allows fbset to read the video mode database stored by
-	default BUSYBOX_DEFAULT_FEATURE_FBSET_READMODE /etc/fb.modes, which can be used to set frame buffer
+	  default BUSYBOX_DEFAULT_FEATURE_FBSET_READMODE /etc/fb.modes, which can be used to set frame buffer
-	device to pre-defined video modes.
+	  device to pre-defined video modes.
 config BUSYBOX_CONFIG_FDFORMAT
-	bool "fdformat (4.4 kb)"
+	bool "fdformat"
 	default BUSYBOX_DEFAULT_FDFORMAT
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	fdformat is used to low-level format a floppy disk.
+	  fdformat is used to low-level format a floppy disk.
 config BUSYBOX_CONFIG_FDISK
-	bool "fdisk (37 kb)"
+	bool "fdisk"
 	default BUSYBOX_DEFAULT_FDISK
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 config BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
 	bool "Write support"
 	default BUSYBOX_DEFAULT_FEATURE_FDISK_WRITABLE
 	depends on BUSYBOX_CONFIG_FDISK
 	help
-	Enabling this option allows you to create or change a partition table
+	  Enabling this option allows you to create or change a partition table
-	and write those changes out to disk. If you leave this option
+	  and write those changes out to disk. If you leave this option
-	disabled, you will only be able to view the partition table.
+	  disabled, you will only be able to view the partition table.
 config BUSYBOX_CONFIG_FEATURE_AIX_LABEL
 	bool "Support AIX disklabels"
 	default BUSYBOX_DEFAULT_FEATURE_AIX_LABEL
 	depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
 	help
-	Enabling this option allows you to create or change AIX disklabels.
+	  Enabling this option allows you to create or change AIX disklabels.
-	Most people can safely leave this option disabled.
+	  Most people can safely leave this option disabled.
 config BUSYBOX_CONFIG_FEATURE_SGI_LABEL
 	bool "Support SGI disklabels"
 	default BUSYBOX_DEFAULT_FEATURE_SGI_LABEL
 	depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
 	help
-	Enabling this option allows you to create or change SGI disklabels.
+	  Enabling this option allows you to create or change SGI disklabels.
-	Most people can safely leave this option disabled.
+	  Most people can safely leave this option disabled.
 config BUSYBOX_CONFIG_FEATURE_SUN_LABEL
 	bool "Support SUN disklabels"
 	default BUSYBOX_DEFAULT_FEATURE_SUN_LABEL
 	depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
 	help
-	Enabling this option allows you to create or change SUN disklabels.
+	  Enabling this option allows you to create or change SUN disklabels.
-	Most people can safely leave this option disabled.
+	  Most people can safely leave this option disabled.
 config BUSYBOX_CONFIG_FEATURE_OSF_LABEL
 	bool "Support BSD disklabels"
 	default BUSYBOX_DEFAULT_FEATURE_OSF_LABEL
 	depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
 	help
-	Enabling this option allows you to create or change BSD disklabels
+	  Enabling this option allows you to create or change BSD disklabels
-	and define and edit BSD disk slices.
+	  and define and edit BSD disk slices.
 config BUSYBOX_CONFIG_FEATURE_GPT_LABEL
 	bool "Support GPT disklabels"
 	default BUSYBOX_DEFAULT_FEATURE_GPT_LABEL
 	depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
 	help
-	Enabling this option allows you to view GUID Partition Table
+	  Enabling this option allows you to view GUID Partition Table
-	disklabels.
+	  disklabels.
 config BUSYBOX_CONFIG_FEATURE_FDISK_ADVANCED
 	bool "Support expert mode"
 	default BUSYBOX_DEFAULT_FEATURE_FDISK_ADVANCED
 	depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
 	help
-	Enabling this option allows you to do terribly unsafe things like
+	  Enabling this option allows you to do terribly unsafe things like
-	define arbitrary drive geometry, move the beginning of data in a
+	  define arbitrary drive geometry, move the beginning of data in a
-	partition, and similarly evil things. Unless you have a very good
+	  partition, and similarly evil things. Unless you have a very good
-	reason you would be wise to leave this disabled.
+	  reason you would be wise to leave this disabled.
 config BUSYBOX_CONFIG_FINDFS
+	bool "findfs"
+	default BUSYBOX_DEFAULT_FINDFS
-	bool "findfs (12 kb)"
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	default BUSYBOX_DEFAULT_FINDFS
+	select BUSYBOX_CONFIG_VOLUMEID
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	help
-	select BUSYBOX_CONFIG_VOLUMEID
+	  Prints the name of a filesystem with given label or UUID.
-	help
+	  WARNING:
-	Prints the name of a filesystem with given label or UUID.
+	  With all submodules selected, it will add ~8k to busybox.
 config BUSYBOX_CONFIG_FLOCK
-	bool "flock (6.3 kb)"
+	bool "flock"
 	default BUSYBOX_DEFAULT_FLOCK
 	help
-	Manage locks from shell scripts
+	  Manage locks from shell scripts
 config BUSYBOX_CONFIG_FDFLUSH
-	bool "fdflush (1.3 kb)"
+	bool "fdflush"
 	default BUSYBOX_DEFAULT_FDFLUSH
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	fdflush is only needed when changing media on slightly-broken
+	  fdflush is only needed when changing media on slightly-broken
-	removable media drives. It is used to make Linux believe that a
+	  removable media drives. It is used to make Linux believe that a
-	hardware disk-change switch has been actuated, which causes Linux to
+	  hardware disk-change switch has been actuated, which causes Linux to
-	forget anything it has cached from the previous media. If you have
+	  forget anything it has cached from the previous media. If you have
-	such a slightly-broken drive, you will need to run fdflush every time
+	  such a slightly-broken drive, you will need to run fdflush every time
-	you change a disk. Most people have working hardware and can safely
+	  you change a disk. Most people have working hardware and can safely
-	leave this disabled.
+	  leave this disabled.
 config BUSYBOX_CONFIG_FREERAMDISK
-	bool "freeramdisk (1.3 kb)"
+	bool "freeramdisk"
 	default BUSYBOX_DEFAULT_FREERAMDISK
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	Linux allows you to create ramdisks. This utility allows you to
+	  Linux allows you to create ramdisks. This utility allows you to
-	delete them and completely free all memory that was used for the
+	  delete them and completely free all memory that was used for the
-	ramdisk. For example, if you boot Linux into a ramdisk and later
+	  ramdisk. For example, if you boot Linux into a ramdisk and later
-	pivot_root, you may want to free the memory that is allocated to the
+	  pivot_root, you may want to free the memory that is allocated to the
-	ramdisk. If you have no use for freeing memory from a ramdisk, leave
+	  ramdisk. If you have no use for freeing memory from a ramdisk, leave
-	this disabled.
+	  this disabled.
 config BUSYBOX_CONFIG_FSCK_MINIX
-	bool "fsck.minix (13 kb)"
+	bool "fsck_minix"
 	default BUSYBOX_DEFAULT_FSCK_MINIX
 	help
-	The minix filesystem is a nice, small, compact, read-write filesystem
+	  The minix filesystem is a nice, small, compact, read-write filesystem
-	with little overhead. It is not a journaling filesystem however and
+	  with little overhead. It is not a journaling filesystem however and
-	can experience corruption if it is not properly unmounted or if the
+	  can experience corruption if it is not properly unmounted or if the
-	power goes off in the middle of a write. This utility allows you to
+	  power goes off in the middle of a write. This utility allows you to
-	check for and attempt to repair any corruption that occurs to a minix
+	  check for and attempt to repair any corruption that occurs to a minix
-	filesystem.
+	  filesystem.
 config BUSYBOX_CONFIG_FSFREEZE
-	bool "fsfreeze (3.5 kb)"
+	bool "fsfreeze"
 	default BUSYBOX_DEFAULT_FSFREEZE
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	select BUSYBOX_CONFIG_LONG_OPTS
 	help
-	Halt new accesses and flush writes on a mounted filesystem.
+	  Halt new accesses and flush writes on a mounted filesystem.
 config BUSYBOX_CONFIG_FSTRIM
-	bool "fstrim (4.4 kb)"
+	bool "fstrim"
 	default BUSYBOX_DEFAULT_FSTRIM
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	Discard unused blocks on a mounted filesystem.
+	  Discard unused blocks on a mounted filesystem.
 config BUSYBOX_CONFIG_GETOPT
-	bool "getopt (5.8 kb)"
+	bool "getopt"
 	default BUSYBOX_DEFAULT_GETOPT
 	help
-	The getopt utility is used to break up (parse) options in command
+	  The getopt utility is used to break up (parse) options in command
-	lines to make it easy to write complex shell scripts that also check
+	  lines to make it easy to write complex shell scripts that also check
-	for legal (and illegal) options. If you want to write horribly
+	  for legal (and illegal) options. If you want to write horribly
-	complex shell scripts, or use some horribly complex shell script
+	  complex shell scripts, or use some horribly complex shell script
-	written by others, this utility may be for you. Most people will
+	  written by others, this utility may be for you. Most people will
-	wisely leave this disabled.
+	  wisely leave this disabled.
 config BUSYBOX_CONFIG_FEATURE_GETOPT_LONG
-	bool "Support -l LONGOPTs"
+	bool "Support option -l"
-	default BUSYBOX_DEFAULT_FEATURE_GETOPT_LONG
+	default BUSYBOX_DEFAULT_FEATURE_GETOPT_LONG if BUSYBOX_CONFIG_LONG_OPTS
-	depends on BUSYBOX_CONFIG_GETOPT && BUSYBOX_CONFIG_LONG_OPTS
+	depends on BUSYBOX_CONFIG_GETOPT
 	help
-	Enable support for long options (option -l).
+	  Enable support for long options (option -l).
 config BUSYBOX_CONFIG_HEXDUMP
-	bool "hexdump (8.6 kb)"
+	bool "hexdump"
 	default BUSYBOX_DEFAULT_HEXDUMP
 	help
-	The hexdump utility is used to display binary data in a readable
+	  The hexdump utility is used to display binary data in a readable
-	way that is comparable to the output from most hex editors.
+	  way that is comparable to the output from most hex editors.
 config BUSYBOX_CONFIG_FEATURE_HEXDUMP_REVERSE
 	bool "Support -R, reverse of 'hexdump -Cv'"
 	default BUSYBOX_DEFAULT_FEATURE_HEXDUMP_REVERSE
 	depends on BUSYBOX_CONFIG_HEXDUMP
 	help
-	The hexdump utility is used to display binary data in an ascii
+	  The hexdump utility is used to display binary data in an ascii
-	readable way. This option creates binary data from an ascii input.
+	  readable way. This option creates binary data from an ascii input.
-	NB: this option is non-standard. It's unwise to use it in scripts
+	  NB: this option is non-standard. It's unwise to use it in scripts
-	aimed to be portable.
+	  aimed to be portable.
 config BUSYBOX_CONFIG_HD
-	bool "hd (7.8 kb)"
+	bool "hd"
 	default BUSYBOX_DEFAULT_HD
 	help
-	hd is an alias to hexdump -C.
+	  hd is an alias to hexdump -C.
 config BUSYBOX_CONFIG_XXD
-	bool "xxd (8.9 kb)"
+	bool "xxd"
 	default BUSYBOX_DEFAULT_XXD
 	help
-	The xxd utility is used to display binary data in a readable
+	  The xxd utility is used to display binary data in a readable
+	  way that is comparable to the output from most hex editors.
+config BUSYBOX_CONFIG_HWCLOCK
+	bool "hwclock"
+	default BUSYBOX_DEFAULT_HWCLOCK
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	way that is comparable to the output from most hex editors.
+	help
-config BUSYBOX_CONFIG_HWCLOCK
+	  The hwclock utility is used to read and set the hardware clock
-	bool "hwclock (5.8 kb)"
+	  on a system. This is primarily used to set the current time on
-	default BUSYBOX_DEFAULT_HWCLOCK
+	  shutdown in the hardware clock, so the hardware will keep the
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	  correct time when Linux is _not_ running.
-	help
-	The hwclock utility is used to read and set the hardware clock
+config BUSYBOX_CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS
-	on a system. This is primarily used to set the current time on
+	bool "Support long options (--hctosys,...)"
-	shutdown in the hardware clock, so the hardware will keep the
+	default BUSYBOX_DEFAULT_FEATURE_HWCLOCK_LONG_OPTIONS
-	correct time when Linux is _not_ running.
+	depends on BUSYBOX_CONFIG_HWCLOCK && BUSYBOX_CONFIG_LONG_OPTS
 config BUSYBOX_CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS
 	bool "Use FHS /var/lib/hwclock/adjtime"
 	default BUSYBOX_DEFAULT_FEATURE_HWCLOCK_ADJTIME_FHS  # util-linux-ng in Fedora 13 still uses /etc/adjtime
 	depends on BUSYBOX_CONFIG_HWCLOCK
 	help
-	Starting with FHS 2.3, the adjtime state file is supposed to exist
+	  Starting with FHS 2.3, the adjtime state file is supposed to exist
-	at /var/lib/hwclock/adjtime instead of /etc/adjtime. If you wish
+	  at /var/lib/hwclock/adjtime instead of /etc/adjtime. If you wish
-	to use the FHS behavior, answer Y here, otherwise answer N for the
+	  to use the FHS behavior, answer Y here, otherwise answer N for the
-	classic /etc/adjtime path.
+	  classic /etc/adjtime path.
-	pathname.com/fhs/pub/fhs-2.3.html#VARLIBHWCLOCKSTATEDIRECTORYFORHWCLO
+	  pathname.com/fhs/pub/fhs-2.3.html#VARLIBHWCLOCKSTATEDIRECTORYFORHWCLO
 config BUSYBOX_CONFIG_IONICE
-	bool "ionice (3.8 kb)"
+	bool "ionice"
 	default BUSYBOX_DEFAULT_IONICE
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	Set/set program io scheduling class and priority
+	  Set/set program io scheduling class and priority
-	Requires kernel >= 2.6.13
+	  Requires kernel >= 2.6.13
 config BUSYBOX_CONFIG_IPCRM
-	bool "ipcrm (3.2 kb)"
+	bool "ipcrm"
 	default BUSYBOX_DEFAULT_IPCRM
 	help
-	The ipcrm utility allows the removal of System V interprocess
+	  The ipcrm utility allows the removal of System V interprocess
-	communication (IPC) objects and the associated data structures
+	  communication (IPC) objects and the associated data structures
-	from the system.
+	  from the system.
 config BUSYBOX_CONFIG_IPCS
-	bool "ipcs (11 kb)"
+	bool "ipcs"
 	default BUSYBOX_DEFAULT_IPCS
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	The ipcs utility is used to provide information on the currently
+	  The ipcs utility is used to provide information on the currently
-	allocated System V interprocess (IPC) objects in the system.
+	  allocated System V interprocess (IPC) objects in the system.
 config BUSYBOX_CONFIG_LAST
-	bool "last (6.1 kb)"
+	bool "last"
 	default BUSYBOX_DEFAULT_LAST
 	depends on BUSYBOX_CONFIG_FEATURE_WTMP
 	help
-	'last' displays a list of the last users that logged into the system.
+	  'last' displays a list of the last users that logged into the system.
 config BUSYBOX_CONFIG_FEATURE_LAST_FANCY
 	bool "Output extra information"
 	default BUSYBOX_DEFAULT_FEATURE_LAST_FANCY
 	depends on BUSYBOX_CONFIG_LAST
 	help
-	'last' displays detailed information about the last users that
+	  'last' displays detailed information about the last users that
-	logged into the system (mimics sysvinit last). +900 bytes.
+	  logged into the system (mimics sysvinit last). +900 bytes.
 config BUSYBOX_CONFIG_LOSETUP
-	bool "losetup (5.5 kb)"
+	bool "losetup"
 	default BUSYBOX_DEFAULT_LOSETUP
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	losetup is used to associate or detach a loop device with a regular
+	  losetup is used to associate or detach a loop device with a regular
-	file or block device, and to query the status of a loop device. This
+	  file or block device, and to query the status of a loop device. This
-	version does not currently support enabling data encryption.
+	  version does not currently support enabling data encryption.
 config BUSYBOX_CONFIG_LSPCI
-	bool "lspci (6.3 kb)"
+	bool "lspci"
 	default BUSYBOX_DEFAULT_LSPCI
 	#select PLATFORM_LINUX
 	help
-	lspci is a utility for displaying information about PCI buses in the
+	  lspci is a utility for displaying information about PCI buses in the
-	system and devices connected to them.
+	  system and devices connected to them.
-	This version uses sysfs (/sys/bus/pci/devices) only.
+	  This version uses sysfs (/sys/bus/pci/devices) only.
 config BUSYBOX_CONFIG_LSUSB
-	bool "lsusb (4.2 kb)"
+	bool "lsusb"
 	default BUSYBOX_DEFAULT_LSUSB
 	#select PLATFORM_LINUX
 	help
-	lsusb is a utility for displaying information about USB buses in the
+	  lsusb is a utility for displaying information about USB buses in the
-	system and devices connected to them.
+	  system and devices connected to them.
-	This version uses sysfs (/sys/bus/usb/devices) only.
+	  This version uses sysfs (/sys/bus/usb/devices) only.
 config BUSYBOX_CONFIG_MDEV
-	bool "mdev (17 kb)"
+	bool "mdev"
 	default BUSYBOX_DEFAULT_MDEV
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	mdev is a mini-udev implementation for dynamically creating device
+	  mdev is a mini-udev implementation for dynamically creating device
-	nodes in the /dev directory.
+	  nodes in the /dev directory.
-	For more information, please see docs/mdev.txt
+	  For more information, please see docs/mdev.txt
 config BUSYBOX_CONFIG_FEATURE_MDEV_CONF
 	bool "Support /etc/mdev.conf"
 	default BUSYBOX_DEFAULT_FEATURE_MDEV_CONF
 	depends on BUSYBOX_CONFIG_MDEV
 	help
-	Add support for the mdev config file to control ownership and
+	  Add support for the mdev config file to control ownership and
-	permissions of the device nodes.
+	  permissions of the device nodes.
-	For more information, please see docs/mdev.txt
+	  For more information, please see docs/mdev.txt
 config BUSYBOX_CONFIG_FEATURE_MDEV_RENAME
 	bool "Support subdirs/symlinks"
 	default BUSYBOX_DEFAULT_FEATURE_MDEV_RENAME
 	depends on BUSYBOX_CONFIG_FEATURE_MDEV_CONF
 	help
-	Add support for renaming devices and creating symlinks.
+	  Add support for renaming devices and creating symlinks.
-	For more information, please see docs/mdev.txt
+	  For more information, please see docs/mdev.txt
 config BUSYBOX_CONFIG_FEATURE_MDEV_RENAME_REGEXP
 	bool "Support regular expressions substitutions when renaming device"
 	default BUSYBOX_DEFAULT_FEATURE_MDEV_RENAME_REGEXP
 	depends on BUSYBOX_CONFIG_FEATURE_MDEV_RENAME
 	help
-	Add support for regular expressions substitutions when renaming
+	  Add support for regular expressions substitutions when renaming
-	device.
+	  device.
 config BUSYBOX_CONFIG_FEATURE_MDEV_EXEC
 	bool "Support command execution at device addition/removal"
 	default BUSYBOX_DEFAULT_FEATURE_MDEV_EXEC
 	depends on BUSYBOX_CONFIG_FEATURE_MDEV_CONF
 	help
-	This adds support for an optional field to /etc/mdev.conf for
+	  This adds support for an optional field to /etc/mdev.conf for
-	executing commands when devices are created/removed.
+	  executing commands when devices are created/removed.
-	For more information, please see docs/mdev.txt
+	  For more information, please see docs/mdev.txt
 config BUSYBOX_CONFIG_FEATURE_MDEV_LOAD_FIRMWARE
-	bool "Support loading of firmware"
+	bool "Support loading of firmwares"
 	default BUSYBOX_DEFAULT_FEATURE_MDEV_LOAD_FIRMWARE
 	depends on BUSYBOX_CONFIG_MDEV
 	help
-	Some devices need to load firmware before they can be usable.
+	  Some devices need to load firmware before they can be usable.
-	These devices will request userspace look up the files in
+	  These devices will request userspace look up the files in
-	/lib/firmware/ and if it exists, send it to the kernel for
+	  /lib/firmware/ and if it exists, send it to the kernel for
-	loading into the hardware.
+	  loading into the hardware.
 config BUSYBOX_CONFIG_MESG
-	bool "mesg (1.4 kb)"
+	bool "mesg"
 	default BUSYBOX_DEFAULT_MESG
 	help
-	Mesg controls access to your terminal by others. It is typically
+	  Mesg controls access to your terminal by others. It is typically
-	used to allow or disallow other users to write to your terminal
+	  used to allow or disallow other users to write to your terminal
 config BUSYBOX_CONFIG_FEATURE_MESG_ENABLE_ONLY_GROUP
 	bool "Enable writing to tty only by group, not by everybody"
 	default BUSYBOX_DEFAULT_FEATURE_MESG_ENABLE_ONLY_GROUP
 	depends on BUSYBOX_CONFIG_MESG
 	help
-	Usually, ttys are owned by group "tty", and "write" tool is
+	  Usually, ttys are owned by group "tty", and "write" tool is
-	setgid to this group. This way, "mesg y" only needs to enable
+	  setgid to this group. This way, "mesg y" only needs to enable
-	"write by owning group" bit in tty mode.
+	  "write by owning group" bit in tty mode.
-	If you set this option to N, "mesg y" will enable writing
+	  If you set this option to N, "mesg y" will enable writing
-	by anybody at all. This is not recommended.
+	  by anybody at all. This is not recommended.
 config BUSYBOX_CONFIG_MKE2FS
-	bool "mke2fs (10 kb)"
+	bool "mke2fs"
 	default BUSYBOX_DEFAULT_MKE2FS
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	Utility to create EXT2 filesystems.
+	  Utility to create EXT2 filesystems.
 config BUSYBOX_CONFIG_MKFS_EXT2
-	bool "mkfs.ext2 (10 kb)"
+	bool "mkfs.ext2"
 	default BUSYBOX_DEFAULT_MKFS_EXT2
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	Alias to "mke2fs".
+	  Alias to "mke2fs".
 config BUSYBOX_CONFIG_MKFS_MINIX
-	bool "mkfs.minix (10 kb)"
+	bool "mkfs_minix"
 	default BUSYBOX_DEFAULT_MKFS_MINIX
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	The minix filesystem is a nice, small, compact, read-write filesystem
+	  The minix filesystem is a nice, small, compact, read-write filesystem
-	with little overhead. If you wish to be able to create minix
+	  with little overhead. If you wish to be able to create minix
-	filesystems this utility will do the job for you.
+	  filesystems this utility will do the job for you.
 config BUSYBOX_CONFIG_FEATURE_MINIX2
 	bool "Support Minix fs v2 (fsck_minix/mkfs_minix)"
 	default BUSYBOX_DEFAULT_FEATURE_MINIX2
 	depends on BUSYBOX_CONFIG_FSCK_MINIX || BUSYBOX_CONFIG_MKFS_MINIX
 	help
-	If you wish to be able to create version 2 minix filesystems, enable
+	  If you wish to be able to create version 2 minix filesystems, enable
-	this. If you enabled 'mkfs_minix' then you almost certainly want to
+	  this. If you enabled 'mkfs_minix' then you almost certainly want to
-	be using the version 2 filesystem support.
+	  be using the version 2 filesystem support.
 config BUSYBOX_CONFIG_MKFS_REISER
 	bool "mkfs_reiser"
 	default BUSYBOX_DEFAULT_MKFS_REISER
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	Utility to create ReiserFS filesystems.
+	  Utility to create ReiserFS filesystems.
-	Note: this applet needs a lot of testing and polishing.
+	  Note: this applet needs a lot of testing and polishing.
 config BUSYBOX_CONFIG_MKDOSFS
-	bool "mkdosfs (7.2 kb)"
+	bool "mkdosfs"
 	default BUSYBOX_DEFAULT_MKDOSFS
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	Utility to create FAT32 filesystems.
+	  Utility to create FAT32 filesystems.
 config BUSYBOX_CONFIG_MKFS_VFAT
-	bool "mkfs.vfat (7.2 kb)"
+	bool "mkfs.vfat"
 	default BUSYBOX_DEFAULT_MKFS_VFAT
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	Alias to "mkdosfs".
+	  Alias to "mkdosfs".
 config BUSYBOX_CONFIG_MKSWAP
-	bool "mkswap (6.3 kb)"
+	bool "mkswap"
 	default BUSYBOX_DEFAULT_MKSWAP
 	help
-	The mkswap utility is used to configure a file or disk partition as
+	  The mkswap utility is used to configure a file or disk partition as
-	Linux swap space. This allows Linux to use the entire file or
+	  Linux swap space. This allows Linux to use the entire file or
+	  partition as if it were additional RAM, which can greatly increase
-	partition as if it were additional RAM, which can greatly increase
+	  the capability of low-memory machines. This additional memory is
-	the capability of low-memory machines. This additional memory is
+	  much slower than real RAM, but can be very helpful at preventing your
-	much slower than real RAM, but can be very helpful at preventing your
+	  applications being killed by the Linux out of memory (OOM) killer.
-	applications being killed by the Linux out of memory (OOM) killer.
+	  Once you have created swap space using 'mkswap' you need to enable
-	Once you have created swap space using 'mkswap' you need to enable
+	  the swap space using the 'swapon' utility.
 	the swap space using the 'swapon' utility.
+config BUSYBOX_CONFIG_FEATURE_MKSWAP_UUID
-config BUSYBOX_CONFIG_FEATURE_MKSWAP_UUID
+	bool "UUID support"
-	bool "UUID support"
+	default BUSYBOX_DEFAULT_FEATURE_MKSWAP_UUID
-	default BUSYBOX_DEFAULT_FEATURE_MKSWAP_UUID
+	depends on BUSYBOX_CONFIG_MKSWAP
-	depends on BUSYBOX_CONFIG_MKSWAP
+	help
-	help
+	  Generate swap spaces with universally unique identifiers.
-	Generate swap spaces with universally unique identifiers.
+config BUSYBOX_CONFIG_MORE
-config BUSYBOX_CONFIG_MORE
+	bool "more"
-	bool "more (7 kb)"
+	default BUSYBOX_DEFAULT_MORE
-	default BUSYBOX_DEFAULT_MORE
+	help
-	help
+	  more is a simple utility which allows you to read text one screen
-	more is a simple utility which allows you to read text one screen
+	  sized page at a time. If you want to read text that is larger than
-	sized page at a time. If you want to read text that is larger than
+	  the screen, and you are using anything faster than a 300 baud modem,
-	the screen, and you are using anything faster than a 300 baud modem,
+	  you will probably find this utility very helpful. If you don't have
-	you will probably find this utility very helpful. If you don't have
+	  any need to reading text files, you can leave this disabled.
-	any need to reading text files, you can leave this disabled.
+config BUSYBOX_CONFIG_MOUNT
-config BUSYBOX_CONFIG_MOUNT
+	bool "mount"
-	bool "mount (23 kb)"
+	default BUSYBOX_DEFAULT_MOUNT
-	default BUSYBOX_DEFAULT_MOUNT
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	help
-	help
+	  All files and filesystems in Unix are arranged into one big directory
-	All files and filesystems in Unix are arranged into one big directory
+	  tree. The 'mount' utility is used to graft a filesystem onto a
-	tree. The 'mount' utility is used to graft a filesystem onto a
+	  particular part of the tree. A filesystem can either live on a block
-	particular part of the tree. A filesystem can either live on a block
+	  device, or it can be accessible over the network, as is the case with
-	device, or it can be accessible over the network, as is the case with
+	  NFS filesystems. Most people using BusyBox will also want to enable
-	NFS filesystems.
+	  the 'mount' utility.
 config BUSYBOX_CONFIG_FEATURE_MOUNT_FAKE
+	bool "Support option -f"
-	bool "Support -f (fake mount)"
+	default BUSYBOX_DEFAULT_FEATURE_MOUNT_FAKE
-	default BUSYBOX_DEFAULT_FEATURE_MOUNT_FAKE
+	depends on BUSYBOX_CONFIG_MOUNT
-	depends on BUSYBOX_CONFIG_MOUNT
+	help
-	help
+	  Enable support for faking a file system mount.
-	Enable support for faking a file system mount.
+config BUSYBOX_CONFIG_FEATURE_MOUNT_VERBOSE
 	bool "Support option -v"
-config BUSYBOX_CONFIG_FEATURE_MOUNT_VERBOSE
+	default BUSYBOX_DEFAULT_FEATURE_MOUNT_VERBOSE
-	bool "Support -v (verbose)"
+	depends on BUSYBOX_CONFIG_MOUNT
-	default BUSYBOX_DEFAULT_FEATURE_MOUNT_VERBOSE
+	help
-	depends on BUSYBOX_CONFIG_MOUNT
+	  Enable multi-level -v[vv...] verbose messages. Useful if you
-	help
+	  debug mount problems and want to see what is exactly passed
-	Enable multi-level -v[vv...] verbose messages. Useful if you
+	  to the kernel.
 	debug mount problems and want to see what is exactly passed
-	to the kernel.
+config BUSYBOX_CONFIG_FEATURE_MOUNT_HELPERS
 	bool "Support mount helpers"
-config BUSYBOX_CONFIG_FEATURE_MOUNT_HELPERS
+	default BUSYBOX_DEFAULT_FEATURE_MOUNT_HELPERS
-	bool "Support mount helpers"
+	depends on BUSYBOX_CONFIG_MOUNT
-	default BUSYBOX_DEFAULT_FEATURE_MOUNT_HELPERS
+	help
-	depends on BUSYBOX_CONFIG_MOUNT
+	  Enable mounting of virtual file systems via external helpers.
-	help
+	  E.g. "mount obexfs#-b00.11.22.33.44.55 /mnt" will in effect call
-	Enable mounting of virtual file systems via external helpers.
+	  "obexfs -b00.11.22.33.44.55 /mnt"
-	E.g. "mount obexfs#-b00.11.22.33.44.55 /mnt" will in effect call
+	  Also "mount -t sometype [-o opts] fs /mnt" will try
-	"obexfs -b00.11.22.33.44.55 /mnt"
+	  "sometype [-o opts] fs /mnt" if simple mount syscall fails.
-	Also "mount -t sometype [-o opts] fs /mnt" will try
+	  The idea is to use such virtual filesystems in /etc/fstab.
-	"sometype [-o opts] fs /mnt" if simple mount syscall fails.
-	The idea is to use such virtual filesystems in /etc/fstab.
+config BUSYBOX_CONFIG_FEATURE_MOUNT_LABEL
 	bool "Support specifying devices by label or UUID"
-config BUSYBOX_CONFIG_FEATURE_MOUNT_LABEL
+	default BUSYBOX_DEFAULT_FEATURE_MOUNT_LABEL
-	bool "Support specifying devices by label or UUID"
+	depends on BUSYBOX_CONFIG_MOUNT
-	default BUSYBOX_DEFAULT_FEATURE_MOUNT_LABEL
+	select BUSYBOX_CONFIG_VOLUMEID
-	depends on BUSYBOX_CONFIG_MOUNT
+	help
-	select BUSYBOX_CONFIG_VOLUMEID
+	  This allows for specifying a device by label or uuid, rather than by
-	help
+	  name. This feature utilizes the same functionality as blkid/findfs.
-	This allows for specifying a device by label or uuid, rather than by
+	  This also enables label or uuid support for swapon.
 	name. This feature utilizes the same functionality as blkid/findfs.
 config BUSYBOX_CONFIG_FEATURE_MOUNT_NFS
-config BUSYBOX_CONFIG_FEATURE_MOUNT_NFS
+	bool "Support mounting NFS file systems on Linux < 2.6.23"
-	bool "Support mounting NFS file systems on Linux < 2.6.23"
+	default BUSYBOX_DEFAULT_FEATURE_MOUNT_NFS
-	default BUSYBOX_DEFAULT_FEATURE_MOUNT_NFS
+	depends on BUSYBOX_CONFIG_MOUNT
-	depends on BUSYBOX_CONFIG_MOUNT
+	select BUSYBOX_CONFIG_FEATURE_HAVE_RPC
 	select BUSYBOX_CONFIG_FEATURE_SYSLOG
 	help
-	Enable mounting of NFS file systems on Linux kernels prior
+	  Enable mounting of NFS file systems on Linux kernels prior
-	to version 2.6.23. Note that in this case mounting of NFS
-	over IPv6 will not be possible.
-	Note that this option links in RPC support from libc,
-	which is rather large (~10 kbytes on uclibc).
-config BUSYBOX_CONFIG_FEATURE_MOUNT_CIFS
-	bool "Support mounting CIFS/SMB file systems"
-	default BUSYBOX_DEFAULT_FEATURE_MOUNT_CIFS
-	depends on BUSYBOX_CONFIG_MOUNT
-	help
-	Enable support for samba mounts.
-config BUSYBOX_CONFIG_FEATURE_MOUNT_FLAGS
-	depends on BUSYBOX_CONFIG_MOUNT
-	bool "Support lots of -o flags"
-	default BUSYBOX_DEFAULT_FEATURE_MOUNT_FLAGS
-	help
-	Without this, mount only supports ro/rw/remount. With this, it
-	supports nosuid, suid, dev, nodev, exec, noexec, sync, async, atime,
-	noatime, diratime, nodiratime, loud, bind, move, shared, slave,
+	  to version 2.6.23. Note that in this case mounting of NFS
-	private, unbindable, rshared, rslave, rprivate, and runbindable.
+	  over IPv6 will not be possible.
-config BUSYBOX_CONFIG_FEATURE_MOUNT_FSTAB
+	  Note that this option links in RPC support from libc,
-	depends on BUSYBOX_CONFIG_MOUNT
+	  which is rather large (~10 kbytes on uclibc).
-	bool "Support /etc/fstab and -a (mount all)"
+config BUSYBOX_CONFIG_FEATURE_MOUNT_CIFS
+	bool "Support mounting CIFS/SMB file systems"
+	default BUSYBOX_DEFAULT_FEATURE_MOUNT_CIFS
+	depends on BUSYBOX_CONFIG_MOUNT
+	help
+	  Enable support for samba mounts.
+config BUSYBOX_CONFIG_FEATURE_MOUNT_FLAGS
-	default BUSYBOX_DEFAULT_FEATURE_MOUNT_FSTAB
+	depends on BUSYBOX_CONFIG_MOUNT
-	help
+	bool "Support lots of -o flags"
-	Support mount all and looking for files in /etc/fstab.
+	default BUSYBOX_DEFAULT_FEATURE_MOUNT_FLAGS
 	help
-config BUSYBOX_CONFIG_FEATURE_MOUNT_OTHERTAB
+	  Without this, mount only supports ro/rw/remount. With this, it
-	depends on BUSYBOX_CONFIG_FEATURE_MOUNT_FSTAB
+	  supports nosuid, suid, dev, nodev, exec, noexec, sync, async, atime,
-	bool "Support -T <alt_fstab>"
+	  noatime, diratime, nodiratime, loud, bind, move, shared, slave,
-	default BUSYBOX_DEFAULT_FEATURE_MOUNT_OTHERTAB
+	  private, unbindable, rshared, rslave, rprivate, and runbindable.
-	help
-	Support mount -T (specifying an alternate fstab)
+config BUSYBOX_CONFIG_FEATURE_MOUNT_FSTAB
-config BUSYBOX_CONFIG_MOUNTPOINT
+	depends on BUSYBOX_CONFIG_MOUNT
-	bool "mountpoint (4.9 kb)"
+	bool "Support /etc/fstab and -a"
-	default BUSYBOX_DEFAULT_MOUNTPOINT
+	default BUSYBOX_DEFAULT_FEATURE_MOUNT_FSTAB
 	help
-	mountpoint checks if the directory is a mountpoint.
+	  Support mount all and looking for files in /etc/fstab.
-config BUSYBOX_CONFIG_NOLOGIN
-	bool "nologin"
+config BUSYBOX_CONFIG_FEATURE_MOUNT_OTHERTAB
-	default BUSYBOX_DEFAULT_NOLOGIN
+	depends on BUSYBOX_CONFIG_FEATURE_MOUNT_FSTAB
-	depends on BUSYBOX_CONFIG_FEATURE_SH_EMBEDDED_SCRIPTS
+	bool "Support -T <alt_fstab>"
-	help
+	default BUSYBOX_DEFAULT_FEATURE_MOUNT_OTHERTAB
-	Politely refuse a login
+	help
 	  Support mount -T (specifying an alternate fstab)
-config BUSYBOX_CONFIG_NOLOGIN_DEPENDENCIES
+config BUSYBOX_CONFIG_MOUNTPOINT
-	bool "Enable dependencies for nologin"
+	bool "mountpoint"
-	default BUSYBOX_DEFAULT_NOLOGIN_DEPENDENCIES
+	default BUSYBOX_DEFAULT_MOUNTPOINT
-	depends on BUSYBOX_CONFIG_NOLOGIN
+	help
-	select BUSYBOX_CONFIG_CAT
+	  mountpoint checks if the directory is a mountpoint.
-	select BUSYBOX_CONFIG_ECHO
+config BUSYBOX_CONFIG_NSENTER
-	select BUSYBOX_CONFIG_SLEEP
+	bool "nsenter"
-	help
+	default BUSYBOX_DEFAULT_NSENTER
-	nologin is implemented as a shell script. It requires the
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	following in the runtime environment:
+	help
-		cat echo sleep
+	  Run program with namespaces of other processes.
 	If you know these will be available externally you can
-	disable this option.
+config BUSYBOX_CONFIG_FEATURE_NSENTER_LONG_OPTS
-config BUSYBOX_CONFIG_NSENTER
+	bool "Enable long options"
-	bool "nsenter (6.5 kb)"
+	default BUSYBOX_DEFAULT_FEATURE_NSENTER_LONG_OPTS
-	default BUSYBOX_DEFAULT_NSENTER
+	depends on BUSYBOX_CONFIG_NSENTER && BUSYBOX_CONFIG_LONG_OPTS
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	help
-	help
+	  Support long options for the nsenter applet. This makes
-	Run program with namespaces of other processes.
+	  the busybox implementation more compatible with upstream.
 config BUSYBOX_CONFIG_PIVOT_ROOT
-	bool "pivot_root (1.1 kb)"
+	bool "pivot_root"
 	default BUSYBOX_DEFAULT_PIVOT_ROOT
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	The pivot_root utility swaps the mount points for the root filesystem
+	  The pivot_root utility swaps the mount points for the root filesystem
-	with some other mounted filesystem. This allows you to do all sorts
+	  with some other mounted filesystem. This allows you to do all sorts
-	of wild and crazy things with your Linux system and is far more
+	  of wild and crazy things with your Linux system and is far more
-	powerful than 'chroot'.
+	  powerful than 'chroot'.
-	Note: This is for initrd in linux 2.4. Under initramfs (introduced
+	  Note: This is for initrd in linux 2.4. Under initramfs (introduced
-	in linux 2.6) use switch_root instead.
+	  in linux 2.6) use switch_root instead.
 config BUSYBOX_CONFIG_RDATE
-	bool "rdate (5.6 kb)"
+	bool "rdate"
 	default BUSYBOX_DEFAULT_RDATE
 	help
-	The rdate utility allows you to synchronize the date and time of your
+	  The rdate utility allows you to synchronize the date and time of your
-	system clock with the date and time of a remote networked system using
+	  system clock with the date and time of a remote networked system using
-	the RFC868 protocol, which is built into the inetd daemon on most
+	  the RFC868 protocol, which is built into the inetd daemon on most
-	systems.
+	  systems.
 config BUSYBOX_CONFIG_RDEV
-	bool "rdev (1.8 kb)"
+	bool "rdev"
 	default BUSYBOX_DEFAULT_RDEV
 	help
-	Print the device node associated with the filesystem mounted at '/'.
+	  Print the device node associated with the filesystem mounted at '/'.
 config BUSYBOX_CONFIG_READPROFILE
-	bool "readprofile (7.1 kb)"
+	bool "readprofile"
 	default BUSYBOX_DEFAULT_READPROFILE
 	#select PLATFORM_LINUX
 	help
-	This allows you to parse /proc/profile for basic profiling.
+	  This allows you to parse /proc/profile for basic profiling.
 config BUSYBOX_CONFIG_RENICE
-	bool "renice (4.2 kb)"
+	bool "renice"
 	default BUSYBOX_DEFAULT_RENICE
 	help
-	Renice alters the scheduling priority of one or more running
+	  Renice alters the scheduling priority of one or more running
-	processes.
+	  processes.
 config BUSYBOX_CONFIG_REV
-	bool "rev (4.4 kb)"
+	bool "rev"
 	default BUSYBOX_DEFAULT_REV
 	help
-	Reverse lines of a file or files.
+	  Reverse lines of a file or files.
 config BUSYBOX_CONFIG_RTCWAKE
-	bool "rtcwake (6.8 kb)"
+	bool "rtcwake"
 	default BUSYBOX_DEFAULT_RTCWAKE
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	Enter a system sleep state until specified wakeup time.
-config BUSYBOX_CONFIG_SCRIPT
-	bool "script (8.6 kb)"
-	default BUSYBOX_DEFAULT_SCRIPT
-	help
-	The script makes typescript of terminal session.
-config BUSYBOX_CONFIG_SCRIPTREPLAY
-	bool "scriptreplay (2.4 kb)"
-	default BUSYBOX_DEFAULT_SCRIPTREPLAY
-	help
-	This program replays a typescript, using timing information
-	given by script -t.
-config BUSYBOX_CONFIG_SETARCH
-	bool "setarch (3.6 kb)"
-	default BUSYBOX_DEFAULT_SETARCH
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	The linux32 utility is used to create a 32bit environment for the
-	specified program (usually a shell). It only makes sense to have
-	this util on a system that supports both 64bit and 32bit userland
-	(like amd64/x86, ppc64/ppc, sparc64/sparc, etc...).
-config BUSYBOX_CONFIG_LINUX32
-	bool "linux32 (3.3 kb)"
-	default BUSYBOX_DEFAULT_LINUX32
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	help
-	Alias to "setarch linux32".
+	help
+	  Enter a system sleep state until specified wakeup time.
-config BUSYBOX_CONFIG_LINUX64
+config BUSYBOX_CONFIG_SCRIPT
-	bool "linux64 (3.3 kb)"
+	bool "script"
-	default BUSYBOX_DEFAULT_LINUX64
+	default BUSYBOX_DEFAULT_SCRIPT
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	help
-	help
+	  The script makes typescript of terminal session.
-	Alias to "setarch linux64".
+config BUSYBOX_CONFIG_SCRIPTREPLAY
-config BUSYBOX_CONFIG_SETPRIV
+	bool "scriptreplay"
-	bool "setpriv (6.6 kb)"
+	default BUSYBOX_DEFAULT_SCRIPTREPLAY
+	help
-	default BUSYBOX_DEFAULT_SETPRIV
+	  This program replays a typescript, using timing information
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	  given by script -t.
-	select BUSYBOX_CONFIG_LONG_OPTS
+config BUSYBOX_CONFIG_SETARCH
-	help
+	bool "setarch"
-	Run a program with different Linux privilege settings.
+	default BUSYBOX_DEFAULT_SETARCH
-	Requires kernel >= 3.5
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-config BUSYBOX_CONFIG_FEATURE_SETPRIV_DUMP
+	  The linux32 utility is used to create a 32bit environment for the
-	bool "Support dumping current privilege state"
+	  specified program (usually a shell). It only makes sense to have
-	default BUSYBOX_DEFAULT_FEATURE_SETPRIV_DUMP
+	  this util on a system that supports both 64bit and 32bit userland
-	depends on BUSYBOX_CONFIG_SETPRIV
+	  (like amd64/x86, ppc64/ppc, sparc64/sparc, etc...).
-	help
-	Enables the "--dump" switch to print out the current privilege
+config BUSYBOX_CONFIG_LINUX32
-	state. This is helpful for diagnosing problems.
+	bool "linux32"
 	default BUSYBOX_DEFAULT_LINUX32
-config BUSYBOX_CONFIG_FEATURE_SETPRIV_CAPABILITIES
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	bool "Support capabilities"
+	help
-	default BUSYBOX_DEFAULT_FEATURE_SETPRIV_CAPABILITIES
+	  Alias to "setarch linux32".
-	depends on BUSYBOX_CONFIG_SETPRIV
-	help
+config BUSYBOX_CONFIG_LINUX64
-	Capabilities can be used to grant processes additional rights
+	bool "linux64"
-	without the necessity to always execute as the root user.
+	default BUSYBOX_DEFAULT_LINUX64
-	Enabling this option enables "--dump" to show information on
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	capabilities.
-config BUSYBOX_CONFIG_FEATURE_SETPRIV_CAPABILITY_NAMES
-	bool "Support capability names"
-	default BUSYBOX_DEFAULT_FEATURE_SETPRIV_CAPABILITY_NAMES
-	depends on BUSYBOX_CONFIG_SETPRIV && BUSYBOX_CONFIG_FEATURE_SETPRIV_CAPABILITIES
 	help
-	Capabilities can be either referenced via a human-readble name,
-	e.g. "net_admin", or using their index, e.g. "cap_12". Enabling
+	  Alias to "setarch linux64".
-	this option allows using the human-readable names in addition to
+config BUSYBOX_CONFIG_SETPRIV
-	the index-based names.
+	bool "setpriv"
-config BUSYBOX_CONFIG_SETSID
+	default BUSYBOX_DEFAULT_SETPRIV
-	bool "setsid (3.6 kb)"
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	default BUSYBOX_DEFAULT_SETSID
+	select BUSYBOX_CONFIG_LONG_OPTS
 	help
-	setsid runs a program in a new session
+	  Run a program with different Linux privilege settings.
-config BUSYBOX_CONFIG_SWAPON
+	  Requires kernel >= 3.5
-	bool "swapon (15 kb)"
+config BUSYBOX_CONFIG_SETSID
-	default BUSYBOX_DEFAULT_SWAPON
+	bool "setsid"
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	default BUSYBOX_DEFAULT_SETSID
 	help
-	Once you have created some swap space using 'mkswap', you also need
+	  setsid runs a program in a new session
-	to enable your swap space with the 'swapon' utility. The 'swapoff'
+config BUSYBOX_CONFIG_SWAPON
-	utility is used, typically at system shutdown, to disable any swap
+	bool "swapon"
-	space. If you are not using any swap space, you can leave this
+	default BUSYBOX_DEFAULT_SWAPON
-	option disabled.
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	help
-config BUSYBOX_CONFIG_FEATURE_SWAPON_DISCARD
+	  This option enables the 'swapon' utility.
-	bool "Support discard option -d"
-	default BUSYBOX_DEFAULT_FEATURE_SWAPON_DISCARD
+	  Once you have created some swap space using 'mkswap', you also need
-	depends on BUSYBOX_CONFIG_SWAPON
+	  to enable your swap space with the 'swapon' utility. The 'swapoff'
-	help
+	  utility is used, typically at system shutdown, to disable any swap
-	Enable support for discarding swap area blocks at swapon and/or as
+	  space. If you are not using any swap space, you can leave this
-	the kernel frees them. This option enables both the -d option on
+	  option disabled.
-	'swapon' and the 'discard' option for swap entries in /etc/fstab.
 config BUSYBOX_CONFIG_FEATURE_SWAPON_DISCARD
-config BUSYBOX_CONFIG_FEATURE_SWAPON_PRI
+	bool "Support discard option -d"
-	bool "Support priority option -p"
+	default BUSYBOX_DEFAULT_FEATURE_SWAPON_DISCARD
-	default BUSYBOX_DEFAULT_FEATURE_SWAPON_PRI
+	depends on BUSYBOX_CONFIG_SWAPON
-	depends on BUSYBOX_CONFIG_SWAPON
+	help
-	help
+	  Enable support for discarding swap area blocks at swapon and/or as
-	Enable support for setting swap device priority in swapon.
+	  the kernel frees them. This option enables both the -d option on
+	  'swapon' and the 'discard' option for swap entries in /etc/fstab.
 config BUSYBOX_CONFIG_SWAPOFF
-	bool "swapoff (14 kb)"
+config BUSYBOX_CONFIG_FEATURE_SWAPON_PRI
-	default BUSYBOX_DEFAULT_SWAPOFF
+	bool "Support priority option -p"
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	default BUSYBOX_DEFAULT_FEATURE_SWAPON_PRI
 	depends on BUSYBOX_CONFIG_SWAPON
-config BUSYBOX_CONFIG_FEATURE_SWAPONOFF_LABEL
+	help
-	bool "Support specifying devices by label or UUID"
+	  Enable support for setting swap device priority in swapon.
 	default BUSYBOX_DEFAULT_FEATURE_SWAPONOFF_LABEL
-	depends on BUSYBOX_CONFIG_SWAPON || BUSYBOX_CONFIG_SWAPOFF
+config BUSYBOX_CONFIG_SWAPOFF
-	select BUSYBOX_CONFIG_VOLUMEID
+	bool "swapoff"
-	help
+	default BUSYBOX_DEFAULT_SWAPOFF
-	This allows for specifying a device by label or uuid, rather than by
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	name. This feature utilizes the same functionality as blkid/findfs.
+	help
-config BUSYBOX_CONFIG_SWITCH_ROOT
+	  This option enables the 'swapoff' utility.
-	bool "switch_root (5.5 kb)"
+config BUSYBOX_CONFIG_SWITCH_ROOT
-	default BUSYBOX_DEFAULT_SWITCH_ROOT
+	bool "switch_root"
-	select BUSYBOX_CONFIG_PLATFORM_LINUX
+	default BUSYBOX_DEFAULT_SWITCH_ROOT
-	help
+	select BUSYBOX_CONFIG_PLATFORM_LINUX
-	The switch_root utility is used from initramfs to select a new
+	help
-	root device. Under initramfs, you have to use this instead of
+	  The switch_root utility is used from initramfs to select a new
-	pivot_root. (Stop reading here if you don't care why.)
+	  root device. Under initramfs, you have to use this instead of
+	  pivot_root. (Stop reading here if you don't care why.)
 	Booting with initramfs extracts a gzipped cpio archive into rootfs
-	(which is a variant of ramfs/tmpfs). Because rootfs can't be moved
+	  Booting with initramfs extracts a gzipped cpio archive into rootfs
-	or unmounted*, pivot_root will not work from initramfs. Instead,
+	  (which is a variant of ramfs/tmpfs). Because rootfs can't be moved
-	switch_root deletes everything out of rootfs (including itself),
+	  or unmounted*, pivot_root will not work from initramfs. Instead,
-	does a mount --move that overmounts rootfs with the new root, and
+	  switch_root deletes everything out of rootfs (including itself),
-	then execs the specified init program.
+	  does a mount --move that overmounts rootfs with the new root, and
 	  then execs the specified init program.
-	* Because the Linux kernel uses rootfs internally as the starting
-	and ending point for searching through the kernel's doubly linked
+	  * Because the Linux kernel uses rootfs internally as the starting
-	list of active mount points. That's why.
+	  and ending point for searching through the kernel's doubly linked
 	  list of active mount points. That's why.
 config BUSYBOX_CONFIG_TASKSET
-	bool "taskset (4.2 kb)"
+	bool "taskset"
 	default BUSYBOX_DEFAULT_TASKSET
 	help
-	Retrieve or set a processes's CPU affinity.
+	  Retrieve or set a processes's CPU affinity.
-	This requires sched_{g,s}etaffinity support in your libc.
+	  This requires sched_{g,s}etaffinity support in your libc.
 config BUSYBOX_CONFIG_FEATURE_TASKSET_FANCY
 	bool "Fancy output"
 	default BUSYBOX_DEFAULT_FEATURE_TASKSET_FANCY
 	depends on BUSYBOX_CONFIG_TASKSET
 	help
-	Needed for machines with more than 32-64 CPUs:
+	  Needed for machines with more than 32-64 CPUs:
-	affinity parameter 0xHHHHHHHHHHHHHHHHHHHH can be arbitrarily long
+	  affinity parameter 0xHHHHHHHHHHHHHHHHHHHH can be arbitrarily long
-	in this case. Otherwise, it is limited to sizeof(long).
+	  in this case. Otherwise, it is limited to sizeof(long).
 config BUSYBOX_CONFIG_UEVENT
-	bool "uevent (3.1 kb)"
+	bool "uevent"
 	default BUSYBOX_DEFAULT_UEVENT
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	uevent is a netlink listener for kernel uevent notifications
+	  uevent is a netlink listener for kernel uevent notifications
-	sent via netlink. It is usually used for dynamic device creation.
+	  sent via netlink. It is usually used for dynamic device creation.
 config BUSYBOX_CONFIG_UMOUNT
-	bool "umount (5.1 kb)"
+	bool "umount"
 	default BUSYBOX_DEFAULT_UMOUNT
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	help
-	When you want to remove a mounted filesystem from its current mount
+	  When you want to remove a mounted filesystem from its current mount
-	point, for example when you are shutting down the system, the
+	  point, for example when you are shutting down the system, the
-	'umount' utility is the tool to use. If you enabled the 'mount'
+	  'umount' utility is the tool to use. If you enabled the 'mount'
-	utility, you almost certainly also want to enable 'umount'.
+	  utility, you almost certainly also want to enable 'umount'.
 config BUSYBOX_CONFIG_FEATURE_UMOUNT_ALL
-	bool "Support -a (unmount all)"
+	bool "Support option -a"
 	default BUSYBOX_DEFAULT_FEATURE_UMOUNT_ALL
 	depends on BUSYBOX_CONFIG_UMOUNT
 	help
-	Support -a option to unmount all currently mounted filesystems.
+	  Support -a option to unmount all currently mounted filesystems.
 config BUSYBOX_CONFIG_UNSHARE
-	bool "unshare (7.2 kb)"
+	bool "unshare"
 	default BUSYBOX_DEFAULT_UNSHARE
 	depends on !BUSYBOX_CONFIG_NOMMU
 	select BUSYBOX_CONFIG_PLATFORM_LINUX
 	select BUSYBOX_CONFIG_LONG_OPTS
 	help
-	Run program with some namespaces unshared from parent.
+	  Run program with some namespaces unshared from parent.
 config BUSYBOX_CONFIG_WALL
-	bool "wall (2.6 kb)"
+	bool "wall"
 	default BUSYBOX_DEFAULT_WALL
 	depends on BUSYBOX_CONFIG_FEATURE_UTMP
 	help
-	Write a message to all users that are logged in.
+	  Write a message to all users that are logged in.
 comment "Common options for mount/umount"
 	depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT