OpenWrt – Diff between revs 2 and 3
?pathlinks?
Rev 2 | Rev 3 | |||
---|---|---|---|---|
1 | /dts-v1/; |
1 | /dts-v1/; |
|
2 | |
2 | |
|
3 | #include "rt3883.dtsi" |
3 | #include "rt3883.dtsi" |
|
4 | |
4 | |
|
5 | #include <dt-bindings/gpio/gpio.h> |
5 | #include <dt-bindings/gpio/gpio.h> |
|
6 | #include <dt-bindings/input/input.h> |
6 | #include <dt-bindings/input/input.h> |
|
7 | |
7 | |
|
8 | / { |
8 | / { |
|
9 | compatible = "sitecom,wlr-6000", "ralink,rt3883-soc"; |
9 | compatible = "sitecom,wlr-6000", "ralink,rt3883-soc"; |
|
10 | model = "Sitecom WLR-6000"; |
10 | model = "Sitecom WLR-6000"; |
|
11 | |
11 | |
|
12 | aliases { |
- | ||
13 | led-boot = &led_power; |
- | ||
14 | led-failsafe = &led_power; |
- | ||
15 | led-running = &led_power; |
- | ||
16 | led-upgrade = &led_power; |
- | ||
17 | }; |
- | ||
18 | |
- | ||
19 | keys { |
12 | gpio-keys-polled { |
|
- | 13 | compatible = "gpio-keys-polled"; |
||
- | 14 | #address-cells = <1>; |
||
20 | compatible = "gpio-keys-polled"; |
15 | #size-cells = <0>; |
|
21 | poll-interval = <20>; |
16 | poll-interval = <20>; |
|
22 | |
17 | |
|
23 | reset { |
18 | reset { |
|
24 | label = "reset"; |
19 | label = "reset"; |
|
25 | gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; |
20 | gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; |
|
26 | linux,code = <KEY_RESTART>; |
21 | linux,code = <KEY_RESTART>; |
|
27 | }; |
22 | }; |
|
28 | }; |
23 | }; |
|
29 | |
24 | |
|
30 | leds { |
25 | gpio-leds { |
|
31 | compatible = "gpio-leds"; |
26 | compatible = "gpio-leds"; |
|
32 | |
27 | |
|
33 | led_power: power { |
28 | power { |
|
34 | label = "wlr-6000:red:power"; |
29 | label = "wlr-6000:red:power"; |
|
35 | gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; |
30 | gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; |
|
36 | }; |
31 | }; |
|
37 | |
32 | |
|
38 | ops { |
33 | ops { |
|
39 | label = "wlr-6000:white:ops"; |
34 | label = "wlr-6000:white:ops"; |
|
40 | gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; |
35 | gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; |
|
41 | }; |
36 | }; |
|
42 | }; |
37 | }; |
|
43 | |
38 | |
|
44 | gpio_export { |
39 | gpio_export { |
|
45 | compatible = "gpio-export"; |
40 | compatible = "gpio-export"; |
|
46 | #size-cells = <0>; |
41 | #size-cells = <0>; |
|
47 | |
42 | |
|
48 | usb { |
43 | usb { |
|
49 | gpio-export,name = "usb"; |
44 | gpio-export,name = "usb"; |
|
50 | gpio-export,output = <1>; |
45 | gpio-export,output = <1>; |
|
51 | gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; |
46 | gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; |
|
52 | }; |
47 | }; |
|
53 | }; |
48 | }; |
|
54 | }; |
49 | }; |
|
55 | |
50 | |
|
56 | &gpio1 { |
51 | &gpio1 { |
|
57 | status = "okay"; |
52 | status = "okay"; |
|
58 | }; |
53 | }; |
|
59 | |
54 | |
|
60 | &pinctrl { |
55 | &pinctrl { |
|
61 | state_default: pinctrl0 { |
56 | state_default: pinctrl0 { |
|
62 | gpio { |
57 | gpio { |
|
63 | ralink,group = "i2c", "jtag", "uartf"; |
58 | ralink,group = "i2c", "jtag", "uartf"; |
|
64 | ralink,function = "gpio"; |
59 | ralink,function = "gpio"; |
|
65 | }; |
60 | }; |
|
66 | }; |
61 | }; |
|
67 | }; |
62 | }; |
|
68 | |
63 | |
|
69 | ðernet { |
64 | ðernet { |
|
70 | status = "okay"; |
65 | status = "okay"; |
|
71 | mtd-mac-address = <&factory 0x8004>; |
66 | mtd-mac-address = <&factory 0x8004>; |
|
72 | mtd-mac-address-increment = <1>; |
67 | mtd-mac-address-increment = <1>; |
|
73 | |
68 | |
|
74 | port@0 { |
69 | port@0 { |
|
75 | phy-handle = <&phy0>; |
70 | phy-handle = <&phy0>; |
|
76 | phy-mode = "rgmii"; |
71 | phy-mode = "rgmii"; |
|
77 | }; |
72 | }; |
|
78 | |
73 | |
|
79 | mdio-bus { |
74 | mdio-bus { |
|
80 | status = "okay"; |
75 | status = "okay"; |
|
81 | |
76 | |
|
82 | phy0: ethernet-phy@0 { |
77 | phy0: ethernet-phy@0 { |
|
83 | reg = <0>; |
78 | reg = <0>; |
|
84 | phy-mode = "rgmii"; |
79 | phy-mode = "rgmii"; |
|
85 | |
80 | |
|
86 | qca,ar8327-initvals = < |
81 | qca,ar8327-initvals = < |
|
87 | 0x04 0x07600000 /* PORT0 PAD MODE CTRL */ |
82 | 0x04 0x07600000 /* PORT0 PAD MODE CTRL */ |
|
88 | 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */ |
83 | 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */ |
|
89 | 0x10 0x40000000 /* Power-on Strapping: 176-pin interface configuration */ |
84 | 0x10 0x40000000 /* Power-on Strapping: 176-pin interface configuration */ |
|
90 | 0x50 0xc437c437 /* LED Control Register 0 */ |
85 | 0x50 0xc437c437 /* LED Control Register 0 */ |
|
91 | 0x54 0xc337c337 /* LED Control Register 1 */ |
86 | 0x54 0xc337c337 /* LED Control Register 1 */ |
|
92 | 0x58 0x00000000 /* LED Control Register 2 */ |
87 | 0x58 0x00000000 /* LED Control Register 2 */ |
|
93 | 0x5c 0x03ffff00 /* LED Control Register 3 */ |
88 | 0x5c 0x03ffff00 /* LED Control Register 3 */ |
|
94 | 0x7c 0x0000007e /* PORT0_STATUS */ |
89 | 0x7c 0x0000007e /* PORT0_STATUS */ |
|
95 | 0x94 0x0000007e /* PORT6 STATUS */ |
90 | 0x94 0x0000007e /* PORT6 STATUS */ |
|
96 | >; |
91 | >; |
|
97 | }; |
92 | }; |
|
98 | }; |
93 | }; |
|
99 | }; |
94 | }; |
|
100 | |
95 | |
|
101 | &spi0 { |
96 | &spi0 { |
|
102 | status = "okay"; |
97 | status = "okay"; |
|
103 | |
98 | |
|
104 | m25p80@0 { |
99 | m25p80@0 { |
|
- | 100 | #address-cells = <1>; |
||
- | 101 | #size-cells = <1>; |
||
105 | compatible = "jedec,spi-nor"; |
102 | compatible = "jedec,spi-nor"; |
|
106 | reg = <0>; |
103 | reg = <0>; |
|
107 | spi-max-frequency = <8600000>; |
104 | spi-max-frequency = <8600000>; |
|
108 | m25p,fast-read; |
105 | m25p,fast-read; |
|
109 | |
- | ||
110 | partitions { |
- | ||
111 | compatible = "fixed-partitions"; |
- | ||
112 | #address-cells = <1>; |
- | ||
113 | #size-cells = <1>; |
- | ||
114 | |
106 | |
|
115 | partition@0 { |
107 | partition@0 { |
|
116 | label = "u-boot"; |
108 | label = "u-boot"; |
|
117 | reg = <0x0 0x30000>; |
109 | reg = <0x0 0x30000>; |
|
118 | read-only; |
110 | read-only; |
|
119 | }; |
111 | }; |
|
120 | |
112 | |
|
121 | partition@30000 { |
113 | partition@30000 { |
|
122 | label = "u-boot-env"; |
114 | label = "u-boot-env"; |
|
123 | reg = <0x30000 0x10000>; |
115 | reg = <0x30000 0x10000>; |
|
124 | read-only; |
116 | read-only; |
|
125 | }; |
117 | }; |
|
126 | |
118 | |
|
127 | factory: partition@40000 { |
119 | factory: partition@40000 { |
|
128 | label = "factory"; |
120 | label = "factory"; |
|
129 | reg = <0x40000 0x10000>; |
121 | reg = <0x40000 0x10000>; |
|
130 | read-only; |
- | ||
131 | }; |
122 | read-only; |
|
132 | |
123 | }; |
|
133 | partition@50000 { |
124 | |
|
134 | compatible = "denx,uimage"; |
125 | partition@50000 { |
|
135 | label = "firmware"; |
126 | label = "firmware"; |
|
136 | reg = <0x50000 0x713000>; |
127 | reg = <0x50000 0x713000>; |
|
137 | }; |
128 | }; |
|
138 | |
129 | |
|
139 | partition@763000 { |
130 | partition@763000 { |
|
140 | label = "manufacture"; |
131 | label = "manufacture"; |
|
141 | reg = <0x763000 0x7D000>; |
132 | reg = <0x763000 0x7D000>; |
|
142 | read-only; |
133 | read-only; |
|
143 | }; |
134 | }; |
|
144 | |
135 | |
|
145 | partition@7E0000 { |
136 | partition@7E0000 { |
|
146 | label = "backup"; |
137 | label = "backup"; |
|
147 | reg = <0x7E0000 0x10000>; |
138 | reg = <0x7E0000 0x10000>; |
|
148 | read-only; |
- | ||
149 | }; |
139 | read-only; |
|
150 | |
140 | }; |
|
151 | partition@7F0000 { |
141 | |
|
152 | label = "storage"; |
142 | partition@7F0000 { |
|
153 | reg = <0x7F0000 0x10000>; |
143 | label = "storage"; |
|
154 | read-only; |
144 | reg = <0x7F0000 0x10000>; |
|
155 | }; |
145 | read-only; |
|
156 | }; |
146 | }; |
|
157 | }; |
147 | }; |
|
158 | }; |
148 | }; |
|
159 | |
149 | |
|
160 | &pci { |
150 | &pci { |
|
161 | status = "okay"; |
151 | status = "okay"; |
|
- | 152 | pinctrl-names = "default"; |
||
162 | }; |
153 | pinctrl-0 = <&pci_pins>; |
|
- | 154 | |
||
163 | |
155 | pci_pins: pci { |
|
- | 156 | pci { |
||
- | 157 | ralink,group = "pci"; |
||
- | 158 | ralink,function = "pci-fnc"; |
||
- | 159 | }; |
||
- | 160 | }; |
||
- | 161 | |
||
- | 162 | host-bridge { |
||
164 | &pci1 { |
163 | pci-bridge@1 { |
|
165 | status = "okay"; |
164 | status = "okay"; |
|
166 | |
165 | |
|
167 | wifi@0,0 { |
166 | wifi@1814,3091 { |
|
168 | compatible = "pci1814,3091"; |
167 | compatible = "pci1814,3091"; |
|
- | 168 | reg = <0x10000 0 0 0 0>; |
||
- | 169 | ralink,mtd-eeprom = <&factory 0x8000>; |
||
169 | reg = <0x10000 0 0 0 0>; |
170 | }; |
|
170 | ralink,mtd-eeprom = <&factory 0x8000>; |
171 | }; |
|
171 | }; |
172 | }; |
|
172 | }; |
173 | }; |
|
173 | |
174 | |
|
174 | &wmac { |
175 | &wmac { |
|
175 | status = "okay"; |
176 | status = "okay"; |
|
176 | ralink,2ghz = <0>; |
177 | ralink,2ghz = <0>; |
|
177 | ralink,mtd-eeprom = <&factory 0x0>; |
178 | ralink,mtd-eeprom = <&factory 0x0>; |
|
178 | }; |
179 | }; |
|
179 | |
180 | |
|
180 | &ehci { |
181 | &ehci { |
|
181 | status = "okay"; |
182 | status = "okay"; |
|
182 | }; |
183 | }; |
|
183 | |
184 | |
|
184 | &ohci { |
185 | &ohci { |
|
185 | status = "okay"; |
186 | status = "okay"; |
|
186 | }; |
187 | }; |
|
187 | |
188 | |