OpenWrt – Diff between revs 2 and 3

Subversion Repositories:
Rev:
Only display areas with differences – Ignore whitespace
Rev 2 Rev 3
1 /dts-v1/; 1 /dts-v1/;
2   2  
3 #include "rt3050.dtsi" 3 #include "rt3050.dtsi"
4   4  
5 #include <dt-bindings/gpio/gpio.h> 5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h> 6 #include <dt-bindings/input/input.h>
7   7  
8 / { 8 / {
9 compatible = "sitecom,wl-351", "ralink,rt3052-soc"; 9 compatible = "sitecom,wl-351", "ralink,rt3052-soc";
10 model = "Sitecom WL-351 v1 002"; 10 model = "Sitecom WL-351 v1 002";
11   -  
12 aliases { -  
13 led-boot = &led_power; -  
14 led-failsafe = &led_power; -  
15 led-running = &led_power; -  
16 led-upgrade = &led_power; -  
17 }; -  
18   11  
19 cfi@1f000000 { 12 cfi@1f000000 {
20 compatible = "cfi-flash"; 13 compatible = "cfi-flash";
21 reg = <0x1f000000 0x800000>; 14 reg = <0x1f000000 0x800000>;
22 bank-width = <2>; 15 bank-width = <2>;
23 device-width = <2>; 16 device-width = <2>;
-   17 #address-cells = <1>;
-   18 #size-cells = <1>;
-   19  
-   20 partition@0 {
-   21 label = "u-boot";
-   22 reg = <0x0 0x30000>;
-   23 read-only;
-   24 };
-   25  
-   26 partition@30000 {
-   27 label = "u-boot-env";
-   28 reg = <0x30000 0x10000>;
-   29 read-only;
-   30 };
-   31  
-   32 factory: partition@40000 {
-   33 label = "factory";
-   34 reg = <0x40000 0x10000>;
-   35 read-only;
-   36 };
24   -  
25 partitions { -  
26 compatible = "fixed-partitions"; -  
27 #address-cells = <1>; -  
28 #size-cells = <1>; -  
29   -  
30 partition@0 { -  
31 label = "u-boot"; -  
32 reg = <0x0 0x30000>; -  
33 read-only; -  
34 }; -  
35   -  
36 partition@30000 { -  
37 label = "u-boot-env"; -  
38 reg = <0x30000 0x10000>; -  
39 read-only; -  
40 }; -  
41   -  
42 factory: partition@40000 { -  
43 label = "factory"; -  
44 reg = <0x40000 0x10000>; -  
45 read-only; -  
46 }; -  
47   37  
48 partition@50000 { -  
49 compatible = "denx,uimage"; 38 partition@50000 {
50 label = "firmware"; 39 label = "firmware";
51 reg = <0x50000 0x3b0000>; -  
52 }; 40 reg = <0x50000 0x3b0000>;
53 }; 41 };
54 }; 42 };
55   43  
56 leds { 44 gpio-leds {
57 compatible = "gpio-leds"; 45 compatible = "gpio-leds";
58   46  
59 led_power: power { 47 power {
60 label = "wl-351:amber:power"; 48 label = "wl-351:amber:power";
61 gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; 49 gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
62 }; 50 };
63   51  
64 unpopulated { 52 unpopulated {
65 label = "wl-351:amber:unpopulated"; 53 label = "wl-351:amber:unpopulated";
66 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; 54 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
67 }; 55 };
68   56  
69 unpopulated2 { 57 unpopulated2 {
70 label = "wl-351:blue:unpopulated"; 58 label = "wl-351:blue:unpopulated";
71 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; 59 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
72 }; 60 };
73 }; 61 };
74   62  
75 keys { 63 gpio-keys-polled {
-   64 compatible = "gpio-keys-polled";
-   65 #address-cells = <1>;
76 compatible = "gpio-keys-polled"; 66 #size-cells = <0>;
77 poll-interval = <20>; 67 poll-interval = <20>;
78   68  
79 reset { 69 reset {
80 label = "reset"; 70 label = "reset";
81 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; 71 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
82 linux,code = <KEY_RESTART>; 72 linux,code = <KEY_RESTART>;
83 }; 73 };
84   74  
85 wps { 75 wps {
86 label = "wps"; 76 label = "wps";
87 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; 77 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
88 linux,code = <KEY_WPS_BUTTON>; 78 linux,code = <KEY_WPS_BUTTON>;
89 }; 79 };
90 }; 80 };
91   81  
92 rtl8366rb { 82 rtl8366rb {
93 compatible = "realtek,rtl8366rb"; 83 compatible = "realtek,rtl8366rb";
94 gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>; 84 gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
95 gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>; 85 gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
96 }; 86 };
97 }; 87 };
98   88  
99 &pinctrl { 89 &pinctrl {
100 state_default: pinctrl0 { 90 state_default: pinctrl0 {
101 gpio { 91 gpio {
102 ralink,group = "spi", "i2c", "jtag", "mdio", "uartf"; 92 ralink,group = "spi", "i2c", "jtag", "mdio", "uartf";
103 ralink,function = "gpio"; 93 ralink,function = "gpio";
104 }; 94 };
105 }; 95 };
106 }; 96 };
107   97  
108 &ethernet { 98 &ethernet {
109 mtd-mac-address = <&factory 0x4>; 99 mtd-mac-address = <&factory 0x4>;
110 pinctrl-names = "default"; 100 pinctrl-names = "default";
111 pinctrl-0 = <&rgmii_pins>; 101 pinctrl-0 = <&rgmii_pins>;
112 }; 102 };
113   103  
114 &esw { 104 &esw {
115 ralink,rgmii = <1>; 105 ralink,rgmii = <1>;
116 mediatek,portmap = <0x3f>; 106 mediatek,portmap = <0x3f>;
117 ralink,fct2 = <0x0002500c>; 107 ralink,fct2 = <0x0002500c>;
118 /* 108 /*
119 * ext phy base addr 31, rx/tx clock skew 0, 109 * ext phy base addr 31, rx/tx clock skew 0,
120 * turbo mii off, rgmi 3.3v off, port 5 polling off 110 * turbo mii off, rgmi 3.3v off, port 5 polling off
121 * port5: enabled, gige, full-duplex, rx/tx-flow-control 111 * port5: enabled, gige, full-duplex, rx/tx-flow-control
122 * port6: enabled, gige, full-duplex, rx/tx-flow-control 112 * port6: enabled, gige, full-duplex, rx/tx-flow-control
123 */ 113 */
124 ralink,fpa2 = <0x1f003fff>; 114 ralink,fpa2 = <0x1f003fff>;
125 }; 115 };
126   116  
127 &wmac { 117 &wmac {
128 ralink,mtd-eeprom = <&factory 0>; 118 ralink,mtd-eeprom = <&factory 0>;
129 }; 119 };
130   120  
131 &otg { 121 &otg {
132 status = "okay"; 122 status = "okay";
133 }; 123 };
134   124