OpenWrt – Diff between revs 2 and 3
?pathlinks?
Rev 2 | Rev 3 | |||
---|---|---|---|---|
1 | /dts-v1/; |
1 | /dts-v1/; |
|
2 | |
2 | |
|
3 | #include "mt7620a.dtsi" |
3 | #include "mt7620a.dtsi" |
|
4 | |
4 | |
|
5 | #include <dt-bindings/gpio/gpio.h> |
5 | #include <dt-bindings/gpio/gpio.h> |
|
6 | #include <dt-bindings/input/input.h> |
6 | #include <dt-bindings/input/input.h> |
|
7 | |
7 | |
|
8 | / { |
8 | / { |
|
9 | compatible = "buffalo,whr-600d", "ralink,mt7620a-soc"; |
9 | compatible = "buffalo,whr-600d", "ralink,mt7620a-soc"; |
|
10 | model = "Buffalo WHR-600D"; |
10 | model = "Buffalo WHR-600D"; |
|
11 | |
- | ||
12 | aliases { |
- | ||
13 | led-boot = &led_power_green; |
- | ||
14 | led-failsafe = &led_power_green; |
- | ||
15 | led-running = &led_power_green; |
- | ||
16 | led-upgrade = &led_power_green; |
- | ||
17 | }; |
- | ||
18 | |
11 | |
|
19 | leds { |
12 | gpio-leds { |
|
20 | compatible = "gpio-leds"; |
13 | compatible = "gpio-leds"; |
|
21 | |
14 | |
|
22 | power { |
15 | power { |
|
23 | label = "whr-600d:red:power"; |
16 | label = "whr-600d:red:power"; |
|
24 | gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; |
17 | gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; |
|
25 | }; |
18 | }; |
|
26 | |
19 | |
|
27 | wifi { |
20 | wifi { |
|
28 | label = "whr-600d:green:wifi"; |
21 | label = "whr-600d:green:wifi"; |
|
29 | gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; |
22 | gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; |
|
30 | }; |
23 | }; |
|
31 | |
24 | |
|
32 | led_power_green: power2 { |
25 | power2 { |
|
33 | label = "whr-600d:green:power"; |
26 | label = "whr-600d:green:power"; |
|
34 | gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; |
27 | gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; |
|
35 | }; |
28 | }; |
|
36 | |
29 | |
|
37 | wifi2 { |
30 | wifi2 { |
|
38 | label = "whr-600d:orange:wifi"; |
31 | label = "whr-600d:orange:wifi"; |
|
39 | gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; |
32 | gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; |
|
40 | }; |
33 | }; |
|
41 | |
34 | |
|
42 | internet { |
35 | internet { |
|
43 | label = "whr-600d:green:internet"; |
36 | label = "whr-600d:green:internet"; |
|
44 | gpios = <&gpio2 17 GPIO_ACTIVE_LOW>; |
37 | gpios = <&gpio2 17 GPIO_ACTIVE_LOW>; |
|
45 | }; |
38 | }; |
|
46 | |
39 | |
|
47 | router { |
40 | router { |
|
48 | label = "whr-600d:green:router"; |
41 | label = "whr-600d:green:router"; |
|
49 | gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; |
42 | gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; |
|
50 | }; |
43 | }; |
|
51 | |
44 | |
|
52 | router2 { |
45 | router2 { |
|
53 | label = "whr-600d:orange:router"; |
46 | label = "whr-600d:orange:router"; |
|
54 | gpios = <&gpio2 19 GPIO_ACTIVE_LOW>; |
47 | gpios = <&gpio2 19 GPIO_ACTIVE_LOW>; |
|
55 | }; |
48 | }; |
|
56 | }; |
49 | }; |
|
57 | |
50 | |
|
58 | keys { |
51 | gpio-keys-polled { |
|
- | 52 | compatible = "gpio-keys-polled"; |
||
- | 53 | #address-cells = <1>; |
||
59 | compatible = "gpio-keys-polled"; |
54 | #size-cells = <0>; |
|
60 | poll-interval = <20>; |
55 | poll-interval = <20>; |
|
61 | |
56 | |
|
62 | reset { |
57 | reset { |
|
63 | label = "reset"; |
58 | label = "reset"; |
|
64 | gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; |
59 | gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; |
|
65 | linux,code = <KEY_RESTART>; |
60 | linux,code = <KEY_RESTART>; |
|
66 | }; |
61 | }; |
|
67 | |
62 | |
|
68 | aoss { |
63 | aoss { |
|
69 | label = "aoss"; |
64 | label = "aoss"; |
|
70 | gpios = <&gpio2 13 GPIO_ACTIVE_LOW>; |
65 | gpios = <&gpio2 13 GPIO_ACTIVE_LOW>; |
|
71 | linux,code = <KEY_WPS_BUTTON>; |
66 | linux,code = <KEY_WPS_BUTTON>; |
|
72 | }; |
67 | }; |
|
73 | |
68 | |
|
74 | ap { |
69 | ap { |
|
75 | label = "ap"; |
70 | label = "ap"; |
|
76 | gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; |
71 | gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; |
|
77 | linux,code = <BTN_0>; |
72 | linux,code = <BTN_0>; |
|
78 | linux,input-type = <EV_SW>; |
73 | linux,input-type = <EV_SW>; |
|
79 | }; |
74 | }; |
|
80 | |
75 | |
|
81 | bridge { |
76 | bridge { |
|
82 | label = "bridge"; |
77 | label = "bridge"; |
|
83 | gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; |
78 | gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; |
|
84 | linux,code = <BTN_0>; |
79 | linux,code = <BTN_0>; |
|
85 | linux,input-type = <EV_SW>; |
80 | linux,input-type = <EV_SW>; |
|
86 | }; |
81 | }; |
|
87 | }; |
82 | }; |
|
88 | }; |
83 | }; |
|
89 | |
84 | |
|
90 | &gpio2 { |
85 | &gpio2 { |
|
91 | status = "okay"; |
86 | status = "okay"; |
|
92 | }; |
87 | }; |
|
93 | |
88 | |
|
94 | &spi0 { |
89 | &spi0 { |
|
95 | status = "okay"; |
90 | status = "okay"; |
|
96 | |
91 | |
|
97 | m25p80@0 { |
92 | m25p80@0 { |
|
- | 93 | #address-cells = <1>; |
||
- | 94 | #size-cells = <1>; |
||
98 | compatible = "jedec,spi-nor"; |
95 | compatible = "jedec,spi-nor"; |
|
99 | reg = <0>; |
96 | reg = <0>; |
|
100 | spi-max-frequency = <10000000>; |
97 | spi-max-frequency = <10000000>; |
|
101 | |
- | ||
102 | partitions { |
- | ||
103 | compatible = "fixed-partitions"; |
- | ||
104 | #address-cells = <1>; |
- | ||
105 | #size-cells = <1>; |
- | ||
106 | |
98 | |
|
107 | partition@0 { |
99 | partition@0 { |
|
108 | label = "u-boot"; |
100 | label = "u-boot"; |
|
109 | reg = <0x0 0x30000>; |
101 | reg = <0x0 0x30000>; |
|
110 | read-only; |
102 | read-only; |
|
111 | }; |
103 | }; |
|
112 | |
104 | |
|
113 | partition@30000 { |
105 | partition@30000 { |
|
114 | label = "u-boot-env"; |
106 | label = "u-boot-env"; |
|
115 | reg = <0x30000 0x10000>; |
107 | reg = <0x30000 0x10000>; |
|
116 | read-only; |
108 | read-only; |
|
117 | }; |
109 | }; |
|
118 | |
110 | |
|
119 | factory: partition@40000 { |
111 | factory: partition@40000 { |
|
120 | label = "factory"; |
112 | label = "factory"; |
|
121 | reg = <0x40000 0x10000>; |
113 | reg = <0x40000 0x10000>; |
|
122 | read-only; |
114 | read-only; |
|
123 | }; |
115 | }; |
|
124 | |
116 | |
|
125 | partition@50000 { |
- | ||
126 | compatible = "denx,uimage"; |
117 | partition@50000 { |
|
127 | label = "firmware"; |
118 | label = "firmware"; |
|
128 | reg = <0x50000 0x7b0000>; |
- | ||
129 | }; |
119 | reg = <0x50000 0x7b0000>; |
|
130 | }; |
120 | }; |
|
131 | }; |
121 | }; |
|
132 | }; |
122 | }; |
|
133 | |
123 | |
|
134 | &pinctrl { |
124 | &pinctrl { |
|
135 | state_default: pinctrl0 { |
125 | state_default: pinctrl0 { |
|
136 | gpio { |
126 | gpio { |
|
137 | ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd"; |
127 | ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd"; |
|
138 | ralink,function = "gpio"; |
128 | ralink,function = "gpio"; |
|
139 | }; |
129 | }; |
|
140 | }; |
130 | }; |
|
141 | }; |
131 | }; |
|
142 | |
132 | |
|
143 | ðernet { |
133 | ðernet { |
|
144 | pinctrl-names = "default"; |
134 | pinctrl-names = "default"; |
|
145 | pinctrl-0 = <&ephy_pins>; |
135 | pinctrl-0 = <&ephy_pins>; |
|
146 | mtd-mac-address = <&factory 0x4>; |
136 | mtd-mac-address = <&factory 0x4>; |
|
147 | mediatek,portmap = "llllw"; |
137 | mediatek,portmap = "llllw"; |
|
148 | }; |
138 | }; |
|
149 | |
139 | |
|
150 | &gsw { |
140 | &gsw { |
|
151 | mediatek,port4 = "ephy"; |
141 | mediatek,port4 = "ephy"; |
|
152 | }; |
142 | }; |
|
153 | |
143 | |
|
154 | &wmac { |
144 | &wmac { |
|
155 | ralink,mtd-eeprom = <&factory 0>; |
145 | ralink,mtd-eeprom = <&factory 0>; |
|
156 | }; |
146 | }; |
|
157 | |
147 | |
|
158 | &pcie { |
148 | &pcie { |
|
159 | status = "okay"; |
149 | status = "okay"; |
|
160 | }; |
- | ||
161 | |
150 | |
|
162 | &pcie0 { |
151 | pcie-bridge { |
|
163 | wifi@0,0 { |
152 | wifi@1814,5592 { |
|
164 | compatible = "pci1814,5592"; |
153 | compatible = "pci1814,5592"; |
|
165 | reg = <0x0000 0 0 0 0>; |
154 | reg = <0x0000 0 0 0 0>; |
|
- | 155 | ralink,mtd-eeprom = <&factory 0x8000>; |
||
166 | ralink,mtd-eeprom = <&factory 0x8000>; |
156 | }; |
|
167 | }; |
157 | }; |
|
168 | }; |
158 | }; |
|
169 | |
159 | |