OpenWrt – Diff between revs 2 and 3

Subversion Repositories:
Rev:
Only display areas with differences – Ignore whitespace
Rev 2 Rev 3
1 /dts-v1/; 1 /dts-v1/;
2   2  
3 #include "bcm6318.dtsi" 3 #include "bcm6318.dtsi"
4   4  
5 #include <dt-bindings/input/input.h> 5 #include <dt-bindings/input/input.h>
6   6  
7 / { 7 / {
8 model = "Broadcom BCM96318REF_P300 reference board"; 8 model = "Broadcom BCM96318REF_P300 reference board";
9 compatible = "brcm,bcm96318ref_p300", "brcm,bcm6318"; 9 compatible = "brcm,bcm96318ref_p300", "brcm,bcm6318";
10   10  
11 chosen { 11 chosen {
12 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; 12 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
13 stdout-path = "serial0:115200n8"; 13 stdout-path = "serial0:115200n8";
14 }; 14 };
15   15  
16 keys { 16 gpio-keys-polled {
17 compatible = "gpio-keys-polled"; 17 compatible = "gpio-keys-polled";
18 #address-cells = <1>; 18 #address-cells = <1>;
19 #size-cells = <0>; 19 #size-cells = <0>;
20 poll-interval = <20>; 20 poll-interval = <20>;
-   21 debounce-interval = <60>;
21   22  
22 wps { 23 wps {
23 label = "wps"; 24 label = "wps";
24 gpios = <&pinctrl 33 1>; 25 gpios = <&pinctrl 33 1>;
25 linux,code = <KEY_WPS_BUTTON>; 26 linux,code = <KEY_WPS_BUTTON>;
26 debounce-interval = <60>; -  
27 }; 27 };
28   28  
29 reset { 29 reset {
30 label = "reset"; 30 label = "reset";
31 gpios = <&pinctrl 34 1>; 31 gpios = <&pinctrl 34 1>;
32 linux,code = <KEY_RESTART>; 32 linux,code = <KEY_RESTART>;
33 debounce-interval = <60>; -  
34 }; 33 };
35 }; 34 };
36   35  
37 leds { 36 gpio-leds {
38 compatible = "gpio-leds"; 37 compatible = "gpio-leds";
39   38  
40 inet { 39 inet {
41 label = "96318REF_P300:green:inet"; 40 label = "96318REF_P300:green:inet";
42 gpios = <&pinctrl 8 1>; 41 gpios = <&pinctrl 8 1>;
43 }; 42 };
44   43  
45 inet_fail { 44 inet_fail {
46 label = "96318REF_P300:red:inet-fail"; 45 label = "96318REF_P300:red:inet-fail";
47 gpios = <&pinctrl 9 1>; 46 gpios = <&pinctrl 9 1>;
48 }; 47 };
49   48  
50 post_failed { 49 post_failed {
51 label = "96318REF_P300:red:post-failed"; 50 label = "96318REF_P300:red:post-failed";
52 gpios = <&pinctrl 11 1>; 51 gpios = <&pinctrl 11 1>;
53 }; 52 };
54   53  
55 usb_pwron { 54 usb_pwron {
56 label = "96318REF_P300::usb-pwron"; 55 label = "96318REF_P300::usb-pwron";
57 gpios = <&pinctrl 13 1>; 56 gpios = <&pinctrl 13 1>;
58 default-state = "on"; 57 default-state = "on";
59 }; 58 };
60 }; 59 };
61 }; 60 };
62   61  
63 &hsspi { 62 &hsspi {
64 status = "ok"; 63 status = "ok";
65   64  
66 flash@0 { 65 flash@0 {
67 compatible = "jedec,spi-nor"; 66 compatible = "jedec,spi-nor";
68 spi-max-frequency = <62500000>; 67 spi-max-frequency = <62500000>;
69 spi-tx-bus-width = <2>; 68 spi-tx-bus-width = <2>;
70 spi-rx-bus-width = <2>; 69 spi-rx-bus-width = <2>;
71 reg = <0>; 70 reg = <0>;
72   71  
73 #address-cells = <1>; 72 #address-cells = <1>;
74 #size-cells = <1>; 73 #size-cells = <1>;
-   74  
-   75 linux,part-probe = "bcm63xxpart";
75   76  
76 partitions { 77 partitions {
77 compatible = "brcm,bcm963xx-cfe-nor-partitions"; 78 compatible = "brcm,bcm963xx-cfe-nor-partitions";
78 }; 79 };
79 }; 80 };
80 }; 81 };
81   82  
82 &pinctrl { 83 &pinctrl {
83 pinctrl-names = "default"; 84 pinctrl-names = "default";
84 pinctrl-0 = <&pinctrl_usb_pwron>; 85 pinctrl-0 = <&pinctrl_usb_pwron>;
85 }; 86 };
86   87  
87 &uart0 { 88 &uart0 {
88 status = "ok"; 89 status = "ok";
89 }; 90 };
90   91