OpenWrt – Diff between revs 2 and 3

Subversion Repositories:
Rev:
Only display areas with differences – Ignore whitespace
Rev 2 Rev 3
1 /dts-v1/; 1 /dts-v1/;
2   2  
3 #include "bcm6318.dtsi" 3 #include "bcm6318.dtsi"
4   4  
5 #include <dt-bindings/input/input.h> 5 #include <dt-bindings/input/input.h>
6   6  
7 / { 7 / {
8 model = "Broadcom BCM96318REF reference board"; 8 model = "Broadcom BCM96318REF reference board";
9 compatible = "brcm,bcm96318ref", "brcm,bcm6318"; 9 compatible = "brcm,bcm96318ref", "brcm,bcm6318";
10   10  
11 chosen { 11 chosen {
12 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; 12 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
13 stdout-path = "serial0:115200n8"; 13 stdout-path = "serial0:115200n8";
14 }; 14 };
15   15  
16 keys { 16 gpio-keys-polled {
17 compatible = "gpio-keys-polled"; 17 compatible = "gpio-keys-polled";
18 #address-cells = <1>; 18 #address-cells = <1>;
19 #size-cells = <0>; 19 #size-cells = <0>;
20 poll-interval = <20>; 20 poll-interval = <20>;
-   21 debounce-interval = <60>;
21   22  
22 wps { 23 wps {
23 label = "wps"; 24 label = "wps";
24 gpios = <&pinctrl 33 1>; 25 gpios = <&pinctrl 33 1>;
25 linux,code = <KEY_WPS_BUTTON>; 26 linux,code = <KEY_WPS_BUTTON>;
26 debounce-interval = <60>; -  
27 }; 27 };
28   28  
29 reset { 29 reset {
30 label = "reset"; 30 label = "reset";
31 gpios = <&pinctrl 34 1>; 31 gpios = <&pinctrl 34 1>;
32 linux,code = <KEY_RESTART>; 32 linux,code = <KEY_RESTART>;
33 debounce-interval = <60>; -  
34 }; 33 };
35 }; 34 };
36   35  
37 leds { 36 gpio-leds {
38 compatible = "gpio-leds"; 37 compatible = "gpio-leds";
39   38  
40 inet { 39 inet {
41 label = "96318REF:green:inet"; 40 label = "96318REF:green:inet";
42 gpios = <&pinctrl 8 1>; 41 gpios = <&pinctrl 8 1>;
43 }; 42 };
44   43  
45 inet_fail { 44 inet_fail {
46 label = "96318REF:red:inet-fail"; 45 label = "96318REF:red:inet-fail";
47 gpios = <&pinctrl 9 1>; 46 gpios = <&pinctrl 9 1>;
48 }; 47 };
49   48  
50 post_failed { 49 post_failed {
51 label = "96318REF:red:post-failed"; 50 label = "96318REF:red:post-failed";
52 gpios = <&pinctrl 11 1>; 51 gpios = <&pinctrl 11 1>;
53 }; 52 };
54 }; 53 };
55 }; 54 };
56   55  
57 &hsspi { 56 &hsspi {
58 status = "ok"; 57 status = "ok";
59   58  
60 flash@0 { 59 flash@0 {
61 compatible = "jedec,spi-nor"; 60 compatible = "jedec,spi-nor";
62 spi-max-frequency = <62500000>; 61 spi-max-frequency = <62500000>;
63 spi-tx-bus-width = <2>; 62 spi-tx-bus-width = <2>;
64 spi-rx-bus-width = <2>; 63 spi-rx-bus-width = <2>;
65 reg = <0>; 64 reg = <0>;
66   65  
67 #address-cells = <1>; 66 #address-cells = <1>;
68 #size-cells = <1>; 67 #size-cells = <1>;
-   68  
-   69 linux,part-probe = "bcm63xxpart";
69   70  
70 partitions { 71 partitions {
71 compatible = "brcm,bcm963xx-cfe-nor-partitions"; 72 compatible = "brcm,bcm963xx-cfe-nor-partitions";
72 }; 73 };
73 }; 74 };
74 }; 75 };
75   76  
76 &pinctrl { 77 &pinctrl {
77 pinctrl-names = "default"; 78 pinctrl-names = "default";
78 pinctrl-0 = <&pinctrl_usb_pwron>; 79 pinctrl-0 = <&pinctrl_usb_pwron>;
79 }; 80 };
80   81  
81 &uart0 { 82 &uart0 {
82 status = "ok"; 83 status = "ok";
83 }; 84 };
84   85